Y50 文具、绘图仪器、簿册、卡片 标准查询与下载

DIN 33865:1998 信息技术.绘图仪.单色绘图仪性能的测定

Purpose of this document is the definition of procedure for the determination of the performance of monochrome plotters. This should make possible a technical comparison of those machines of different procedures even for a layman.

Information Technology - Plotters - Determination of the performance of monochrome plotters

DIN ISO 9957-3:1998 液体绘图介质.第3部分:水基彩色绘图液.要求和试验条件

The document specifies the requirements and test conditions for water-based coloured draughting inks intended for use in tubular technical pens. The pen and ink combinations are intended primarily to provide for coloured lines and filled areas on natural tracing paper conforming to ISO 9961 and other draughting media.

Fluid draughting media - Part 3: Water-based coloured draughting inks; requirements and test conditions (ISO 9957-3:1997)

KS G 2203-1998 钢笔

이 규격은 KS G 2202에 규정하는 펜촉을 사용하고 몸체 내에 보유하는 잉크가 펜촉에

Fountain Pen

ISO 12757-2:1998 圆珠笔和笔芯 第2部分:文件用

This part of ISO 12757 establishes minimum quality requirements for ball point pens (refillable or non-refillable) and refills for documentary use. Basic requirements for ball point pens for general use are given in ISO 12757-1.

Ball point pens and refills - Part 2: Documentary use (DOC)

ISO 12756:1998 绘图与书写仪器 圆珠笔和滚珠笔 词汇 两种语言版

This International Standard defines terms related to ball point pens and roller ball pens.

Drawing and writing instruments - Ball point pens and roller ball pens - Vocabulary

ISO 12757-1:1998 圆珠笔和笔芯 第1部分:一般用途

This part of ISO 12757 establishes minimum quality requirements for ball point pens (refillable or non-refillable) and refills for general use. Additional requirements for ball point pens for documentary use are given in ISO 12757-2.

Ball point pens and refills - Part 1: General use

ISO 14145-2:1998 滚珠笔和笔芯 第2部分:文件用

This part of ISO 14145 establishes minimum quality requirements for roller ball pens (refillable or non-refillable) and refills for documentary use. Basic requirements for roller ball pens for general use are given in ISO 14145-1.

Roller ball pens and refills - Part 2: Documentary use (DOC)

ISO 14145-1:1998 滚珠笔和笔芯 第1部分:一般用途

This part of ISO 14145 establishes minimum quality requirements for roller ball pens (refillable and non-refillable) and refills for general use. Additional requirements for roller ball pens for documentary use are given in ISO 14145-2.

Roller ball pens and refills - Part 1: General use

CKS 596-1998 学校用文具

Covers several types of books and sheets of paper intended for scholastic and related uses. It specifies the covers, the bindings, the grades of paper and the types of ruling.

Scholastic stationery

ANSI Z356.5-1998 工艺美术材料.涂料和油墨

Provides minimum requirements for materials, toxicity, coarse partial content, characteristics, working qualities, preservative effectiveness, size, and packaging of paints and inks for art education.

Art and Craft Materials - Paints and Inks

ASTM E1422-98 法庭书写用墨水的比较试验方法的标准指南

1.1 This Guide is intended to assist forensic examiners comparing writing or marking inks. Included in this analysis scheme are the necessary tools and techniques available to reach conclusions as to the common or different origin of two samples of ink. 1.2 Identifying ink formulas as to their manufacturer or time of manufacture as well as performing ink dating examinations are beyond the scope of this guide. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Test Methods for Forensic Writing Ink Comparison

ISO 9957-3:1997 液体制图介质 第3部分:水性彩色绘图墨水 要求和试验条件

This part of ISO 9957 specifies the requirements and test conditions for water-based coloured draughting inks intended for use in tubular technical pens. The pen and ink combinations are intended primarily to provide for coloured lines and filled areas on natural tracing paper conforming to ISO 9961 and other draughting media.

Fluid draughting media - Part 3: Water-based coloured draughting inks - Requirements and test conditions

QB/T 2293-1997 毛笔

本标准规定了毛笔的定义、产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于以狼毫、羊毫、兔毫等为主要材料制作的书画笔。 本标准不适用于特定类毛笔。

writing brush

ASTM D5398-97(2003) 用户用工美材料光牢性的目视确定的标准操作规程

1.1 This practice covers a method for exposing specimens of colored art materials indoors to sunlight coming through a closed window. Any color change is compared to fading in a Blue Wool Reference and exposed simultaneously.1.2 This practice shall only be used by individuals to select materials with satisfactory lightfastness for their own use or to identify materials that require special protection from light. When test information is to be communicated to others, Test Methods D 4303 or Practice D 5383 must be used.1.3 This practice may be used to indicate art materials that will change color within a few months or years in normal indoor exposure and those that will remain unchanged for a period of years. It is not rigorous enough to verify that materials will remain unchanged for more than fifty years in a home or office environment. A major consideration in developing this method was to keep it simple and short enough to be performed without instrumentation in a comparatively short length of time.1.4 This practice is not suitable for evaluating the lightfastness of materials with a high oil content such as artists' oil, resin-oil or alkyd paints.1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Visual Evaluation of the Lightfastness of Art Materials by the User

ASTM D2175-97(2002) 纸的书本松厚度和书本体积膨胀值的标准试验方法

1.1 This test method provides a means of determining the book bulk and bulking number of printing paper under a specified pressure.1.2 For thickness of single sheets or small packs of sheets, see Test Method D 645.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Book Bulk and Book Bulking Number of Paper

ASTM D2175-97 纸的书本松厚度和书本体积膨胀值的标准试验方法

1.1 This test method provides a means of determining the book bulk and bulking number of printing paper under a specified pressure. 1.2 For thickness of single sheets or small packs of sheets, see Test Method D645. 1.3 This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Book Bulk and Book Bulking Number of Paper

ASTM D5383-97 工艺美术工作者用工美材料光牢性的目视确定的标准操作规程

1.1 This practice covers a method for exposing specimens of colored art materials indoors to sunlight coming through a closed window. A card containing eight Blue Wool References is exposed simultaneously. Blue Wool References 3, 6, and 7, are used as controls in determining when to remove test specimens from exposure and rate them. Test specimens are rated by assigning each specimen the number of the Blue Wool Reference that shows the same amount of color change. 1.2 This practice shall only be used to evaluate the lightfastness of art materials not conforming to specifications D4302, D5098 or D5067 and when it is not feasible to use Test Methods D4303. Practice D5398, which is a simpler method, may be used by artists to evaluate the lightfastness of their own materials. 1.3 This practice is not suitable for evaluating materials with a high oil content such as artists' oil, resin oil or alkyd paints. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists

ASTM D5398-97 用户用工美材料光牢性的目视确定的标准操作规程

1.1 This practice covers a method for exposing specimens of colored art materials indoors to sunlight coming through a closed window. Any color change is compared to fading in a Blue Wool Reference and exposed simultaneously. 1.2 This practice shall only be used by individuals to select materials with satisfactory lightfastness for their own use or to identify materials that require special protection from light. When test information is to be communicated to others, Test Methods D4303 or D5383 must be used. 1.3 This practice is not suitable for evaluating the lightfastness of materials with a high oil content such as artists' oil, resin-oil or alkyd paints. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Visual Evaluation of the Lightfastness of Art Materials by the User

ASTM D5740-97 D4000格式级别的书写材料标准的标准导则

1.1 This classification system covers ___ materials suitable for ___________. The inclusion or exclusion of recycled materials in this classification system must be addressed here. 1.2 The properties included in this standard are those required to identify the compositions covered. There may be other requirements necessary to identify particular characteristics important to specialized applications. These may be specified by using the suffixes as given in Section 5. 1.3 This classification system and subsequent line callout (specification) are intended to provide a means of calling out plastic materials used in the fabrication of end items or parts. It is not intended for the selection of materials. Material selection should be made by those having expertise in the plastic field after careful consideration of the design and the performance required of the part, the environment to which it will be exposed, the fabrication process to be employed, the costs involved, and the inherent properties of the material other than those covered by this standard. Note 1-Insert Note 1 here to show the appropriate ISO equivalency statement. 1.4 The following precautionary caveat pertains only to the test method portion, Section 11, of this classification system: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Writing Material Standards in the Classification D4000 Format

ASTM D2175-97(2007) 纸的书本松厚度和书本体积膨胀值的标准试验方法

The measurement of book bulk by this test method is particularly useful to book manufacturers and printers for determining the probable thickness of a book consisting of a particular paper in a specified number of sheets or pages.1.1 This test method provides a means of determining the book bulk and bulking number of printing paper under a specified pressure.1.2 For thickness of single sheets or small packs of sheets, see Test Method D 645/D 645M.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Book Bulk and Book Bulking Number of Paper