Y50 文具、绘图仪器、簿册、卡片 标准查询与下载

QB/T 1337-1991 卷笔刀

本标准规定了卷笔刀的术语、产品分类、技术要求、试验方法、检骏规则及标志、包装、运输、贮存。

Pencil sharpener

DIN 5005:1991 活页夹纸.A4和A5纸标准打孔尺寸

The standard specifies dimensions and arrangement for punching of sheets for paper sizes A4 and A5.

Sheets for loose leaf binders; dimensions for standard punching for paper sizes A4 and A5

QB/T 1145-1991 机械中文打字机油漆件 技术要求和试验方法

本标准规定了机械中文打字机各种油漆零件的技术要求和测试方法。 本标准适用于鉴定机械中文打字机油漆零件的质量。

Technical requirements and test methods for painted parts of mechanical Chinese typewriters

QB/T 1024-1991 活动铅笔用黑铅芯

木标准规定了活动铅笔用黑铅芯的分类、技术要求、试验方法、检验规则等。 本标准适用于与活动铅笔配套用黑色铅芯。铅芯的主要着色成分是石墨，产生的黑色线迹具有可擦性。

mechanical pencil with black lead

QB/T 1023-1991 活动铅笔

本标准规定了活动铅笔的质量指标和检验方法及要求。 本标准适用于脉动式活动铅笔和坠芯式活动铅笔。

mechanical pencil

JIS S 6016:1991 印台

この規格は、金属製又はプラスチック製容器に，インキを吸収させた吸蔵体で構成された印床をもつ一般の事務に使用するスタンプ台(以下，スタンプ台という。)について規定する。

Stamp pads

DIN 821-3:1991 文件和文件夹.第3部分:概念

The standard specifies the terms which are imported in connection with files and folders. These specifications shall harmonize the terminology for a better understanding between manufacturers, merchants and users.#,,#

Files and folders; concepts

ASTM F362-91(2005) 测定油墨色带消磁性试验方法

This test method is used to compare the relative erasability of similar ribbons having approximately the same amount (degree) of ink (inking) transfer capability. It is suitable for compiling rankings for comparative testing against a control ribbon for service evaluation and quality control (research).1.1 This test method covers the determination of the erasability of inked ribbons. 1.2 Results are expressed in visual ranking order or in comparison to a control. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining the Erasability of Inked Ribbons

DIN 58516:1990 固定中心弹簧圆规的枢针

This standard contains dimensions for pivot needles which are used in fixed center spring bows.

Pivot needles for fixed center spring bow

DIN 58502:1990 绘图仪器.要求和试验

This standard contains requirements for precision drawing instruments and standard drawing instruments which are necessary for an unobjectionable function of drawing instruments.

Drawing instruments; requirements, testing

DIN ISO 9175-1:1990 用绘图墨水的手持式描图纸专用笔的管状笔尖.第1部分:定义、尺寸、名称和标志

This standard specifies dimensions for tabular tips for hand-held technical pens using india ink on tracing paper, irrespective of their design and manufacture, to ensure consistent line thickness within predetermined specifications, with or without lettering guides and templates.#,,#

Tubular tips for hand-held technical pen using india ink; definitions, dimensions, designation and marking; identical with ISO 9175-1:1988

NF E04-707-1:1990 机械铅笔.第1部分:分类,尺寸,性能要求和试验

Mechanical pencils. Part 1 : classification, dimensions, performance requirements and testing.

DIN ISO 9177-2:1990 活动铅笔.黑铅芯.分类和尺寸

The standard specifies a classification and dimensions for black leads used for mechanical pencils.

Mechanical pencils; black leads, classification and dimensions; identical with ISO 9177-2:1989

QB/T 3677-1999 SPZ 05A-30塑料笔杆成型机

本标准规定了SPZ 05A-30塑料笔杆成型机的基本参数、技未要求、试验方法与检验规则、标志、包装、运输、贮存。 本标准适用子SPZ 05A-30塑料笔杆成型机(热塑性、单螺杆、单工位、立式)。

SPZ 05A-30 Plastic Pen Holder Forming Machine

QB/T 3904-1999 绘图机

本标准规定了绘图机的分类、技术要求、试验方法、验收规则和标志、包装、运输、贮存。 本标准适用于钢带型、连杆型和导轨型绘图机，其他型式的绘图机亦应参照使用。

Drafting machines

NF E04-706:1989 管状技术笔.罗盘连接器

Tubular technical pens. Adaptor for compasses.

NF E04-701-2:1989 用墨汁在描图纸上绘图时使用的手持式工程笔的管状笔尖.第2部分:性能、试验参数和试验条件

Tubular tips for hand-held technical pens using india ink on tracing paper. Part 2 : performance, test parameters and test conditions.

NF E04-703-1:1989 书写字母和符号用模板.第1部分:一般原则和识别标志

Templates for lettering and symbols. Part 1 : general principles and identification markings.

NF E04-703-3:1989 书写字母和符号用的模板.第3部分:符合ISO 9175-1的管状笔尖工程笔的模型槽宽度

Templates for lettering and symbols. Part 3 : slot widths for technical pens with tubular tips in accordance with iso 9175-1.

DIN ISO 9180:1989 木制铅笔的黑色铅芯.分类及直径

The standard specifies a classification and classification and diameters for black leads used for wood-cased pencils.

Black leads for wood-cased pencils; classification and diameters; identical with ISO 9180:1988