Y56 体育用品 标准查询与下载

ISO 5912:2011 露营帐篷

Camping tents

DIN ISO 7331:2011 对高山滑雪用滑雪杖的要求和试验方法(ISO 7331-2011)

Ski-poles for alpine skiing - Requirements and test methods (ISO 7331:2011)

DIN ISO 7794:2011 越野滑雪橇.对雪橇固定螺钉的要求(ISO 7794-2011)

Cross-country skis - Ski-binding screws - Requirements (ISO 7794:2011)

NF S52-701:2011 高山滑雪用滑雪杖的要求和试验方法.

Ski-poles for alpine skiing - Requirements and test methods.

ISO 7795:2011 越野雪橇.雪橇紧固螺钉.试验方法

This International Standard specifies test methods for determining the mounting and fastening characteristics of screws that are intended for fastening ski binding to cross-country skis. The requirements for ski-binding screws are specified in ISO 7794. The results of the test methods specified in this International Standard characterize only the properties of the screw. The results do not specify the actual mounting and fastening characteristics of different ski models, this information being specified in ISO 9119.

Cross-country skis - Ski-binding screws - Test methods

DIN EN 13634:2011 职业摩托车驾驶员用防护鞋类.试验方法和要求.德文版本EN 13634-2010

This European Standard applies to protective footwear for motorcycle riders for use while riding motorcycles for on or off road activities. it specifies the requirements for protection,ergonomic characteristies, innocuounsness mechanical properties, marking and information for users, it also describes the apporopriate test methods.

Protective footwear for motorcycle riders - Requirements and test methods; German version EN 13634:2010

BS EN 893:2010 登山设备.钉鞋.试验方法和安全性要求

Mountaineering equipment. Crampons. Safety requirements and test methods

BS EN 13634:2010 专业摩托车驾驶者用防护鞋袜.试验方法和要求

Protective footwear for motorcycle riders. Requirements and test methods

ANSI/ASTM F2842:2011 夸特马赛马和受严格训练用马缰绳规范

Specification for Reins Used in Thoroughbred and Quarter Horse Racing

NF S52-345/IN1:2011 登山滑雪设备.klettersteig(钢索栈道)攀登使用的冲击能吸收系统.试验方法和安全性要求

Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods.

ASTM F2856-11a 用于彩色弹球的小型CO₂气缸互冲和安全运转的标准操作规程

1.1 This practice is intended to satisfy the demand for information on the basic procedures for the safe handling and transfilling of small (not bulk) paintball CO2 cylinders commonly used with a paintball marker for propulsion of a paintball. This standard does not address issues dealing with the transfilling, storage, and handling of supply cylinders that may be used in transfilling smaller cylinders. 1.2 The CO2 fill procedures are written for the pressure cycling cylinder transfilling method most commonly used by paintball field and/or store operators. 1.3 This practice should not be confused with federal, state, provincial, or municipal specifications or regulations; insurance requirements; or national safety codes. 1.4 This practice does not purport to address all of the safety problems, if any, associated with the safe handling and transfilling of small paintball cylinders. It is the responsibility of the user of this standard to establish appropriate safety practices and determine the applicability of regulatory limitations, such as and not limited to DOT, CGA, and OSHA, prior to use.

Standard Practice for Transfilling and Safe Handling of Small CO₂ Cylinders for Use in Paintball

ANSI/ASTM F1890:2011 测量垒球棒性能因数的试验方法

Standard Test Method for Measuring Softball Bat Performance Factor

ANSI/ASTM F1881:2011 测量棒球球棒性能因数的试验方法

Test Method For Measuring Baseball Bat Performance Factor

ANSI/ASTM F1544:2011 射箭弓额定速率的测定用规范

Specification For Determining The Rating Velocities Of An Archery Bow

ASTM F1064-11 租用的全套和非全套高山滑雪板/滑雪靴固定装置/滑雪靴设备的抽样和检验用标准操作规程

The purpose of this practice is to aid in providing the end user with an appropriate functioning system and release/retention value by providing the rental facility with an ongoing program for monitoring the appropriateness of functional characteristics of the system. It is assumed that these procedures are integrated into the maintenance and operating procedures specified by the equipment manufacturers. This practice is not intended to create additional or redundant requirements for the rental facility. However, this practice should be the basis for the development of rental procedures if the equipment manufacturer's maintenance and operating procedures do not specifically state that they are in compliance with this practice. This practice will aid the rental facility in providing the end user with an appropriate release/retention value. This practice is applicable to rental facilities that use releasable Alpine ski bindings. It is not intended as a method for evaluating equipment design.1.1 This practice establishes a uniform method for the sampling and inspection of complete and incomplete Alpine ski/binding/boot systems used in rental operations. This practice is appropriate for use in rental applications in which all or part of the functional components of the system are supplied by the rental facility. 1.2 This practice should be followed by any facility that rents complete or incomplete Alpine ski/binding/boot systems to an end user. Note 18212;Refer to Practice F1063 for equivalent procedures and tolerances for retail systems.

Standard Practice for Sampling and Inspection of Complete and Incomplete Alpine Ski/Binding/Boot Systems in Rental Applications

ASTM F472-11 高山滑雪板的几何标准术语

A standard set of definitions is needed to allow manufacturers, consumers, retailers, and scientists to use a common language in describing Alpine skis.1.1 This terminology covers the terms required to describe the geometry of Alpine skis and does not cover special purpose skis. 1.2 The terms are presented in a sequence considered to be the most logical, with definitions presented later calling upon those presented earlier.

Standard Terminology for Geometry of Alpine Skis

ANSI/ASTM F1853:2011 睡袋容积测量的试验方法

Test Method for Measuring Sleeping Bag Packing Volume

ANSI/ASTM F2040:2011 雪上娱乐运动用头盔的规范

Specification for Helmets Used for Recreational Snow Sports

ASTM F2553-11 颜色球运动中使用的可再填充 CO₂气瓶警告规范

This specification specifies the minimum warnings and instructions that are to be provided on the CO2 cylinder itself.1.1 This specification covers warnings used on refillable CO2 cylinders with a threaded interface used in the sport of paintball. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Warnings on Refillable CO₂ Cylinders Used In the Sport of Paintball

ASTM F1853-11 睡袋容积测量的标准试验方法

This test method can be used to quantify and compare packing volumes of sleeping bags. It defines the volume occupied by a sleeping bag under a standardized load (see 4.2).1.1 This test method covers the quantitative volume of a sleeping bag in a cylinder under a standardized load. 1.2 This test method uses a physical volumetric measurement applicable in the laboratory or in the field. 1.3 The values stated in SI units are to be regarded as standard. The inch-pound units given in parentheses are provided for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measuring Sleeping Bag Packing Volume