Y56 体育用品 标准查询与下载

KS G 5747-2010 体操比赛用弹性地板

이 표준은 체조 경기에 사용하는 마루 운동용 탄성 마루(이하 마루라 한다.)에 대하여 규정

Gymnastic equipment-Surfaces for floor exercises-Boards

KS G 5748-2010 一般运动用垫子

이 표준은 체육관 등에서 사용되는 일반 운동용 매트(이하 매트라 한다.)에 대하여 규정한다

Mats for physical training

SN/T 2569-2010 进出口水上充气运动用品检验规程

本标准规定了进出口水上充气运动用品的抽样方法、技术要求、检验程序和结果判定。 本标准适用于进出口的各种塑料、橡胶及橡胶涂复织物制成的水上充气运动用品。 本标准不适用于水上救生用具及14岁以下儿童使用的玩具产品。

Rules of inspection for import and export aquatic gasifies sport things

BS EN 15638:2009 溜冰鞋.安全性要求和试验方法

This standard applies to ice skates intended for users with a body mass up to 100 kg for ice skating excluding the field of sports competitions. It specifies the minimum safety requirements for ice skates as well as requirements for test methods, marking and information supplied by the manufacturer to reduce the risk of injuries to both third parties and the user during their normal use.

Ice skates - Safety requirements and test methods

DIN EN 13061:2010 防护服装.足球运动员用相关胫骨护套.要求与试验方法.德文版本 EN 13061-2009

This European Standard specifies the general requirements for the ergonomics, innocuousness, sizing, coverage, performance, and cleaning of association football players' shin guards. Test methods are described and performance levels are defined. Requirements for the marking of shin guards and the information to be supplied with them are given.

Protective clothing - Shin guards for association football players - Requirements and test methods; German version EN 13061:2009

ANSI/ASTM F717:2010 足球防护帽规范

Specification For Football Helmets

ASTM F2272-10 彩弹标记物的标准规范

1.1 This specification covers paintball markers, which propel a paintball by means of energy released by compressed air, compressed gas, or other means. 1.2 Limitations8212;This specification does not cover non-recreational paintball markers, for example, those used by law enforcement, scientific, military or theatrical entities. 1.3 The values stated in SI units are to be regarded as the standard; the inch-pound units in parentheses are provided for information only. 1.4 The following precautionary caveat pertains only to the test method portion, Section 8, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Specification for Paintball Markers

ASTM F1776-10 彩弹射击游戏用护眼装置标准规范

1.1 This specification applies to eye, face, and head protective devices, designed for use by players of the sport of paintball, which minimize or significantly reduce injury to the eye, adnexa of eye, face, and head due to paintball impact or penetration, or both. 1.2 EHPDs by nature provide three types of protection. The first type of protection is for the eyes and adnexa of eye and not necessarily for any other parts of the face or head. The second type of protection adds coverage for the ears and face. The third type of coverage adds cranial coverage in addition to that provided to types II and III. These coverage types are defined in Section 8. 1.3 This specification does not limit the wearing of eyeglasses or contact lenses when used in conjunction with the EHPD. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Eye Protective Devices for Paintball Sports

ASTM F429-10 足球运动用保护头盔的减震特性的标准试验方法

Maximum acceleration and time duration data obtained by the specified procedures are intended to determine the shock attenuation characteristics of a headgear. Note 18212;These data can be used at a later date to assess the protection afforded to the head when blows are delivered to the helmet.1.1 This test method covers the determination of the shock-attenuation characteristics of protective headgear for football. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Shock-Attenuation Characteristics of Protective Headgear for Football

ASTM F717-10 橄榄球头盔标准规范

1.1 This specification covers new and reconditioned football helmets intended for use in competitive play and practice with particular reference to shock attenuation requirements. 1.2 This specification establishes shock absorption requirements of complete helmets when tested in accordance with Test Method F429 and establishes requirements for construction, materials, visibility, and labeling. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

Standard Specification for Football Helmets

ANSI/ASTM F1952:2010 下山自行车比赛用头盔规范

Specification for Helmets Used for Downhill Mountain Bicycle Racing

ASTM F1979-10 彩弹射击游戏中用彩弹标准规范

1.1 This specification establishes testing procedures and critical characteristics of common calibers of paintball which help define whether a paintball is suitable for use in the sport of paintball. Furthermore, the specification establishes minimum warning and package labeling to help ensure that the paintballs are used in a safe manner and that the risk of injury is reduced. 1.2 This specification does not cover non-recreational paintballs, for example, those used by law enforcement, scientific, military, or theatrical entities. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This specification does not purport to address all of the safety issues associated with the sport of paintball. It is the responsibility of the user of this specification to establish appropriate safety and health practices and to comply with all applicable laws and regulations.

Standard Specification for Paintballs Used in the Sport of Paintball

ASTM F2844-10 垒球和棒球球棒桶的位移压力的标准试验方法

This test method offers a means to compare the barrel compression of softball and baseball bats. This test is not intended for wood or solid bats. This standard is not intended to define performance of softball or baseball bats but to determine the intrinsic barrel compression of a specific bat.1.1 This test method describes a comparative measurement method for determining the compression of softball and baseball bat barrels as defined by a static compression displacement test. 1.2 This standard can be used to compare the relative barrel compression of bats using a relatively slow, non-impact, loading rate. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Displacement Compression of Softball and Baseball Bat Barrels

ANSI/ASTM F659:2010 滑雪护目器和面罩的标准规范

Specification for Skier Goggles and Faceshields

ASTM F659-10 雪橇滑雪和单板滑雪用护目镜标准规范

1.1 This specification covers the minimal requirements of ski and snowboard goggles (intended for nonmotorized use) to provide a reasonable degree of protection against snow and moisture striking or lodging in the eye or surrounding soft tissue. 1.2 The scope of this specification shall include requirements for materials, optical properties, lens strength and retention, labeling, identification, and testing procedures. 1.2.1 Contact lenses, sunglasses, and corrective dress eye wear are not included within the scope of this specification. (Warning8212;Impact resistant prescription spectacles that conform to the standard specifications of ANSI Z87.1 should be used if spectacles are to be worn under goggle-type eyewear as covered by this specification.) 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. Metric units of measurement in this specification are in accordance with the International System of Units (SI). If a value for measurement as given in this specification is followed by an equivalent value in other units, the first stated is to be regarded as the requirement. A given equivalent value may be approximate. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Ski and Snowboard Goggles

ANSI/ASTM F429:2010 足球运动头盔减震性能的试验方法

Test Method For Shock-Attenuation Characteristics Of Protective Headgear For Football

ASTM F2219-10 测量高速球棒的性能的标准试验方法

These test methods offer a laboratory measure of the performance of baseball and softball bats. Use of these test methods can provide quantitative metrics of bat performance.1.1 A method for determining bat performance by measuring the bat-ball coefficient of restitution (BBCOR), deriving the ball exit speed ratio (BESR), and calculating a batted-ball speed (BBS). It is applicable to baseball and softball bats of any construction or material. The test methods provide quantitative measures of bat dynamic performance that may be used for comparison purposes. 1.2 The BBCOR, BESR, and BBS are each calculated from measurements taken in the laboratory on test equipment meeting the requirements defined in this standard. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Measuring High-Speed Bat Performance

ASTM F2398-10 测定棒球或垒球球棒的惯性动量和撞击中心的标准试验方法

This test method offers a laboratory means to measure the inertial properties of bats, specifically weight, balance point, center of percussion, and MOI, in support of other test methods including the ASTM standards referenced in this document. Use of this test method can provide sports governing bodies the means to establish rules regarding the physical properties of bats, specifically MOI. 1.1 Method for determining the moment of inertia (MOI), the center of percussion (COP), and the balance point (BP) of baseball and softball bats. These physical properties are used in Test Method F1881, Test Method F1890, and Test Methods F2219. 1.2 The MOI, COP, and BP are measured in the laboratory on test equipment meeting the requirements defined in this test method. 1.3 The values stated in inch-pound units are to be regarded as the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat

ANSI/ASTM F1979:2010 彩弹球运动用彩弹球规范

Specification For Paintballs Used In The Sport Of Paintball

BS 7928-2:2009 板球运动员头部和面部防护.板球运动守门员用面部防护用具

This part of BS 7928 specifies requirements for face protectors to be worn by cricket wicket‑keepers. It includes requirements relating to: a) materials and construction; b) impact attenuation properties; c) marking; and d) information to be supplied with the face protector. NOTE For requirements relating to helmets and faceguards, i.e. head protectors, see BS 7928.

Head and face protection for cricketers - Face protectors for cricket wicket-keepers