Y56 体育用品 标准查询与下载

BS EN 12277:2007 登山运动器材.挽具.安全要求和试验方法

This European Standard specifies safety requirements and test methods for harnesses for use in mountaineering including climbing. It is applicable to full body harnesses, small body harnesses, sit harnesses and chest harnesses.

Mountaineering equipment - Harnesses - Safety requirements and test methods

NF S52-337:2007 登山设备.安全带.安全要求和试验方法

Mountaineering equipment - Harnesses - Safety requirements and test methods.

NF S52-345:2007 登山设备.用于klettersteig (via ferrata)攀登的能量吸收设备.安全性要求和试验方法

Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods.

ASTM F1045-07(2013) 冰上曲棍球头盔的标准性能规范

1.1 This performance specification2 covers performance requirements for ice hockey helmets. 1.2 The intent of this performance specification is to reduce the risk of injury to the head without compromising the form and appeal of the game. 1.3 This performance specification covers: (1) performance tests for shock absorption properties of the complete helmet and strength and elongation of the chin strap and its attachment; and (2) requirements for area of coverage and penetration. 1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.5 The following precautionary caveat pertains only to the test methods portion, Section 12, of this performance specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Ice Hockey Helmets

ASTM F1849-07 短道速滑用头盔的标准规范(不包括曲棍球)

1.1 This specification covers performance requirements for helmets used by short track speed ice skaters (excluding hockey). This specification recognizes the desirability of lightweight construction and ventilation; however, it is a performance standard and is not intended to restrict design.1.2 All testing and requirements of this specification shall be in accordance with Test Methods F 1446, except where noted herein.1.3 Partial utilization of this specification is prohibited. Any statement of compliance with this specification must be a certification that the headgear meets all of the requirements of the specification in their entirety. A headgear that fails to meet any one of the requirements of this specification is considered to have failed the specification, and shall not be sold with any indication that it meets parts of the specification.1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Helmets Used in Short Track Speed Ice Skating (Not to Include Hockey)

ASTM F1064-07 出租的全套和非全套高山滑雪板/滑雪靴固定装置/滑雪靴设备的抽样和检验用标准实施规程

The purpose of this practice is to aid in providing the end user with an appropriate functioning system and release/retention value by providing the rental facility with an ongoing program for monitoring the appropriateness of functional characteristics of the system. It is assumed that these procedures are integrated into the maintenance and operating procedures specified by the equipment manufacturers. This practice is not intended to create additional or redundant requirements for the rental facility. However, this practice should be the basis for the development of rental procedures if the equipment manufacturerrsquo;maintenance and operating procedures do not specifically state that they are in compliance with this practice. This practice will aid the rental facility in providing the end user with an appropriate release/retention value. This practice is applicable to rental facilities that use releasable Alpine ski bindings. It is not intended as a method for evaluating equipment design.1.1 This practice establishes a uniform method for the sampling and inspection of complete and incomplete Alpine ski/binding/boot systems used in rental operations. This practice is appropriate for use in rental applications in which all or part of the functional components of the system are supplied by the rental facility.1.2 This practice should be followed by any facility that rents complete or incomplete Alpine ski/binding/boot systems to an end user. Note 1Refer to Practice F 1063 for equivalent procedures and tolerances for retail systems.

Standard Practice for Sampling and Inspection of Complete and Incomplete Alpine Ski/Binding/Boot Systems in Rental Applications

ASTM F1849-07(2012) 短道速滑用头盔的标准规范 (不包括曲棍球)

1.1 This specification covers performance requirements for helmets used by short track speed ice skaters (excluding hockey). This specification recognizes the desirability of lightweight construction and ventilation; however, it is a performance standard and is not intended to restrict design. 1.2 All testing and requirements of this specification shall be in accordance with Test Methods F1446, except where noted herein. 1.3 Partial utilization of this specification is prohibited. Any statement of compliance with this specification must be a certification that the headgear meets all of the requirements of the specification in their entirety. A headgear that fails to meet any one of the requirements of this specification is considered to have failed the specification, and shall not be sold with any indication that it meets parts of the specification. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Helmets Used in Short Track Speed Ice Skating (Not to Include Hockey)

KS G 5708-2006 桌球

이 규격은 탁구공에 대하여 규정한다.

Table tennis ball

KS G 5728-2006 阿尔卑斯滑雪

이 규격은 눈 위를 활주하는 것을 목적으로 하는 알파인 스키(이하, 스키라 한다.)로 호칭

Alpine skis

KS G 5709-2006 棒球手套

이 규격은 야구용 장갑에 대하여 규정한다.

Baseball gloves

KS G 5749-2006 体操运动用着陆加固垫

이 규격은 체육 경기에 사용하는 착지 매트(이하 매트라 한다.)에 대하여 규정한다.

Gymnastic equipment-Landing mats

KS G 5735-2006 滑冰板

이 기준은 스케이트보드의 안전요건 및 시험방법, 표시사항 등에 대하여 규정한다. 스케이트보

Skate board

BS ISO 9462:2006+A1:2009 高山雪撬扣拴.试验方法和要求

Alpine ski bindings - Requirements and test methods

BS ISO 9462:2006 高山雪撬扣拴.安全要求和试验方法

This International Standard specifies the main characteristics of ski-bindings and describes, as an example, the test methods A and B. This International Standard applies to ski-bindings for alpine skiing for children, juniors and adults.

Alpine ski bindings - Requirements and test methods

ISO 11088:2006 高山雪橇/连接装置/靴系统装配、调整和检验

This International Standard specifies assembly, adjustment and inspection procedures for the binding mechanisms of skis, integrating in a practical way, the requirements of those International Standards which are related to skis, bindings and boots. It is intended for all individuals and institutions concerned with those procedures, and especially for sports retailers. It is applicable to a ski/binding/boot system (S-B-B) for alpine skiing, of which at least one component is owned by the user. NOTE In the case where the two components (SB and B) are rented, ISO 13993 gives a method of measurement by sampling as an alternative to systematic measurement, before delivery to the end-user.

Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B) system

NF S52-401:2006 滚轴运动设备的使用者的设施.安全要求和试验法

Facilities for users of roller sports equipment - Safety requirements and test methods.

DB65/T 2640-2006 旅游滑雪场质量等级划分

The division of quality and grade of tourist skiing ground

NF S52-739:2006 高山滑雪板装配.安全要求和试验方法

Alpine touring ski-bindings - Requirements and test methods.

DIN ISO 15344:2006 滑雪板装配.要求和试验方法

This International Standard specifies the essential requirements for a snowboard step-in binding - boot system, hereafter referred to as step-in snowboard bindings. The Standard is applicable to step-in snowboard bindings for adults and children. This type of binding system utilises a mechanical interlocking mechanism, and the interlock mechanism of the system will be specific to the particular manufacturer. Compatibility between different systems is not expected or anticipated, thus each potential combination of boot and binding requires testing. For snowboard plate bindings without a release mechanism, see ISO 14790. For snowboard strap bindings for soft boots see, ISO 14573.#,,#

Snowboard step-in bindings - Requirements and test methods (ISO 15344:2005) English version of DIN ISO 15344:2006-06

ANSI/ASTM F2568:2006 睡袋测量试验方法

This test method determines the internal girth, the internal length and width, and the external length and width of a sleeping bag under a standardized measurement method. The measurement uses a physical measurement method applicable to any location where a flat level surface is provided. The values stated in inch-pound units are to be regarded as standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Test Method for Measurement of Sleeping Bags