Y56 体育用品 标准查询与下载

ASTM F1882-06 家用篮球设备的标准规范

1.1 This specification covers the manufacture, assembly, recommended maintenance and use of complete residential basketball systems.1.2 This specification is intended to reduce the potential hazards associated with the installation and use of residential basketball systems.1.3 This specification is not intended to apply to the following:1.3.1 Equipment intended to be used in places of public assembly, such as, but not limited to, schools, parks, public and private recreational facilities.1.3.2 Individual components, such as rim, backboard, pole, portable base system, net, or other component when that component is not sold as a complete residential basketball system as defined in this specification.1.3.3 Any residential basketball system that is mounted to any structure or surface other than that which is purchased as part of a complete residential basketball system. Examples include, but are not limited to, roof mounting, wall mounting, or any locally or self-manufactured components.1.3.4 Any basketball equipment that does not use a full size rim, 18-in. (45.72-cm) diameter, or is designed for operational heights of less then 6 ft 6 in. (1.98 m) from the playing surface to the bottom of the backboard.1.3.5 Accessories and add-ons.1.4 This specification shall apply only to products manufactured after six months from the date this specification is published.1.5 This specification does not cover product performance or quality, except as related to safety.1.6 The tests are intended to uncover hazards, rather than to demonstrate the reliability of the system. The fact that a mechanism or material of a system fails during testing only is relevant if the failure creates a potential hazard.1.7 The rationale for provisions in this specification are given in and .1.8 The values stated in inch-pound are to be regarded as standard. The values given in parentheses are mathematical converstions to SI units that are provided for information only and are not considered standard.1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Residential Basketball Systems

ASTM F1045-06 冰球运动用头盔的标准性能规范

1.1 This performance specification covers performance requirements for ice hockey helmets.1.2 The intent of this performance specification is to reduce the risk of injury to the head without compromising the form and appeal of the game.1.3 This performance specification covers: (1) performance tests for shock absorption properties of the complete helmet and strength and elongation of the chin strap and its attachment; and (2) requirements for area of coverage and penetration.1.4 The values as stated in inch-pound units are to be regarded as the standard. The values in parentheses are given for information only.1.5 The following precautionary caveat pertains only to the test methods portion, Section 12, of this performance specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Ice Hockey Helmets

ASTM F2553-06 彩弹球运动用可再灌装二氧化碳筒警告标记物的标准规范

1.1 This specification covers warnings used on refillable CO2 cylinders with a threaded interface used in the sport of paintball.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Warnings on Refillable CO₂ Cylinders Used In the Sport of Paintball

DB65/T 2227-2005 新疆喀纳斯风景区及沿线主要景点解说词

The Introduction of the main scenic spotalong the Kanasi of XinJiang Tour Line

DB65/T 2226-2005 新疆喀纳斯风景区及沿线主要景点解说要求

The Introduction Requirements of the main scenic spotalong the Kanasi of XinJiang Tour Line

NF S52-329-1:2005 固定的训练器材.第1部分:一般安全要求和试验方法

Stationary training equipment - Part 1 : general safety requirements and test methods.

NF S52-329-10:2005 固定训练器材.第10部分:带固定轮或无活动轮的训练用自行车的附加特定安全要求和试验方法

Stationary training equipment - Part 10 : exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods.

NF S52-800:2005 野营帐篷

Camping tents.

DIN ISO 10966:2005 体育和娱乐设备.遮篷和野营帐篷用织物.规范

The International Standard specifies the most important material characteristics for woven fabrics for awnings and camping tents. It can also be applied to other types of fabric.To meet the needs arising from different climatic conditions, different national habits in tent usage or different durability-expectations of the customer, the material requirements are split into two levels: A and B. Level A requirements apply to awning and camping tent fabrics intended for use where severe strain is caused by wind, weather or long-term use; Level B requirements are lower than level A and apply to fabrics intended for less severe use. This International Standard follows the awning and camping tent classification given in ISO 8937 and ISO 5912, as follows: awnings: -- type SN: snow awning; -- type R: residential awning; -- type T: touring awning; camping tents: -- type S: sleeping tent: -- class st: standard-weight tents; -- class I: light-weight tents; -- type T: touring tent; -- type R: residential tent.

Sports and recreational equipment - Fabrics for awnings and camping tents - Specification (ISO 10966:2005);English version of DIN ISO 10966:2005

NF S74-558-1:2005 潜水服.第1部分:水中服.要求和试验方法

Diving suits - Part 1 : wet suits - Requirements and test methods.

NF S74-558-3:2005 潜水服.第3部分:自动加热或冷却服装(装置).要求和试验方法

Diving suits - Part 3 : actively heated or cooled suit (systems) - Requirements and test methods.

NF S52-910-2:2005 乒乓球.第2部分:球网组件的孔隙.要求和试验方法

Table tennis - Part 2 : posts for net assemblies - Requirements and test methods.

DIN EN 14225-4:2005 潜水服.第4部分:一个气压潜水服(ADS).人因要求和试验方法

Diving suits - Part 4: One atmosphere suits (ADS) - Human factors requirements and test methods; German version EN 14225-4:2005

TY/T 1001.1-2005 体育场馆设备使用要求及检验方法.第1部分:LED显示屏

TY/T 1001的本部分规定了体育场馆用LED显示屏的定义、分类、使用要求、检验方法及合格判定规则。 本部分适用于田径场、综合体育馆、游泳馆、跳水馆的LED显示屏。其他体育场馆可参照执行。 本部分不包括计时记分系统内的显示屏和场馆内引导方向的显示屏。

Requirements and test methods for sport field equipment Part 1: LED Screen

KS G 5741-2005 撑杆跳及跳高用海绵垫

이 규격은 육상 경기의 장대 높이뛰기 및 높이뛰기용 스펀지 매트(이하 매트라 한다.)에 대

Sponge metes for pole vault and high jump

KS G 5724-2005 鞍马(练习跳跃用)

이 규격은 체조 경기에 사용하는 도마(이하 도마라 한다.)에 대하여 규정한다.

Vaulting horses

KS G 5726-2005 吊环

이 규격은 체조 경기에 사용하는 링(이하 링이라 한다.)에 대하여 규정한다.

Rings

KS G 5736-2005 溜冰

이 규격은 앞부분 및 뒷부분에 각각 2개의 바퀴를 병렬로 장착시킨 것으로서, 구두가 장착된

Roller skate

KS G 5734-2005 射箭

이 규격은 경기에 사용되는 양궁(이하 양궁이라 한다.)에 대하여 규정한다.

Archery

KS G 5720-2005 桌球台

이 규격은 나무질 등의 천판을 갖는 탁구대에 대하여 규정한다.

Table tennis’ tables