Y56 体育用品 标准查询与下载

ASTM F887-05 个人用攀登器具的标准规范

1.1 These specifications cover acceptance testing of climbers and climber straps, body belts and positioning straps with locking snaphooks, harnesses and shock absorbing lanyards used by workers in the climbing of poles, trees, towers, and other structures. Minimum performance criteria for arc resistance of harnesses are included for workers who may be exposed to thermal hazards of momentary electric arcs or flame.1.2 Three types of climbers, Types A, B, and C, and two types of climber straps, Types A and B, are covered.1.3 Two types of body belts, Types A and B, are covered.1.4 Three types of positioning straps, Types A, B, and C, are covered.1.5 Two types of harnesses, Types A and B, are covered.1.6 Two types of shock absorbing lanyards, Types A and B, are covered.1.7 The values stated in inch-pound units are to be regarded as the standard.1.8 The following safety hazards caveat pertains only to the test method portions, 9.2, 10.3, 11.2, 14.3, 15.3, 18.2, 21.2, 22, 23, and 24 and of these specifications: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specifications for Personal Climbing Equipment

ASTM F2031-05 箭杆静态韧性(劲度)测量的标准试验方法

This test method is intended to provide a stable industry standard by which benchmarks and comparisons can be made by manufacturers and consumers. This test method is intended to clarify and define arrow spine or stiffness as it pertains to the archery industry and sport.1.1 This test method covers the formulation and designation of arrow spine measurement standards and nomenclature for arrow shafts.1.2 The English system of measurement, specifically inches of deflection, shall be used for all spine values expressed for a given arrow shaft.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)

ASTM F1064-05 租用的整套和非整套高山滑雪板/绑带/靴系统的抽样和检验的标准实施规程

1.1 This practice establishes a uniform method for the sampling and inspection of complete and incomplete Alpine ski/binding/boot systems used in rental operations. This practice is appropriate for use in rental applications in which all or part of the functional components of the system are supplied by the rental facility.1.2 This practice should be followed by any facility that rents complete or incomplete Alpine ski/binding/boot systems to an end user.Note 18212;Refer to Practice F 1063 for equivalent procedures and tolerances for retail systems.

Standard Practice for Sampling and Inspection of Complete and Incomplete Alpine Ski/Binding/Boot Systems in Rental Applications

ASTM F1063-05 高山滑雪板/绑带/靴系统功能检验和调试的标准实施规程

1.1 This practice provides procedures for inspection and adjustment of alpine ski/binding/boot systems.1.2 This practice should be followed for systems, whether newly mounted or previously mounted, when work is performed on the system that may affect its release function, unless otherwise specified by the binding manufacturer in non-rental applications.1.3 Nonapplicability of this function and release inspection practice to rental shop operations is based upon the existence of applicable ASTM practices.Note 18212;Refer to Practice F 1064 for equivalent procedures and tolerances for complete and incomplete rental systems.

Standard Practice for Functional Inspections and Adjustments of Alpine Ski/Binding/Boot Systems

WJ/Z 11-2005 弹道枪维护保养守则

Ballistic Gun Maintenance Guidelines

ANSI/ASTM F2031:2005 箭柄静态韧性(劲度)测量方法

This test method covers the formulation and designation of arrow spine measurement standards and nomenclature for arrow shafts. The English system of measurement, specifically inches of deflection, shall be used for all spine values expressed for a given arrow shaft. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

TEST METHOD FOR MEASUREMENT OF ARROW SHAFT STATIC SPINE STIFFNESS

ANSI/ASTM F1889:2005 箭杆平直度测量指南

This guide covers the formulation and designation of straightness measurement standards and nomenclature for arrow shafts. This guide is designed to provide manufacturers and consumers a means for measuring the straightness of arrow shafts with tools and devices available in the archery industry and sport. The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only.

GUIDE FOR STRAIGHTNESS MEASUREMENT OF ARROW SHAFTS

ASTM F2121-05 树顶支架标签的标准实施规程

This practice is provided to develop and maintain uniformity in practices for use, selection, location, placement, and content of labels on treestands and climbing sticks, particularly with regard to quality assurance and safety. It is emphasized that the use of these practices will not alter the validity of data determined with specific tests, but provides guidance in the interpretation of test results (valid or invalid) and guidance in the selection of a reasonable general provision in those instances where no standard exists today.1.1 This practice provides guidance for providing user labels on treestands.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Treestand Labels

ASTM F1889-05 测量箭杆平直度的标准指南

The measurement system presented in this guide is intended to ensure uniform arrow shaft straightness measurement standards to avoid confusion of the consumer, which results from the use of different straightness measurement systems.1.1 This guide covers the formulation and designation of straightness measurement standards and nomenclature for arrow shafts. 1.2 This guide is designed to provide manufacturers and consumers a means for measuring the straightness of arrow shafts with tools and devices available in the archery industry and sport. 1.3 The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only.

Standard Guide for Straightness Measurement of Arrow Shafts

ASTM F1890-05 测量垒球球棒性能因数的标准试验方法

This test method offers a laboratory means to compare the performance of a softball bat. Use of this test method can provide sports governing bodies a means to compare calculated BBS and other physical properties of bats.1.1 This test method covers a method for determining bat performance by measuring the bat-ball coefficient of restitution (BBCOR), deriving the bat performance factor (BPF) and calculating a batted ball speed (BBS). It is applicable to softball bats of any construction or material. The method provides a quantitative measure of bat dynamic performance that may be used for comparison purposes.1.2 The BBCOR, BPF, and BBS are each calculated from measurements taken in the laboratory on test equipment meeting the requirements defined in this specification.1.3 The values stated in inch-pound units are to be regarded as the standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Test Method for Measuring Softball Bat Performance Factor

ASTM F2123-05 树顶支架说明书的标准实施规程

This practice is provided to develop and maintain uniformity in practices for selection, content and placement of user instructions for treestands, particularly with regard to quality assurance and safety. It is emphasized that the use of these practices will not alter the validity of data determined with specific tests, but provides guidance in the interpretation of test results (valid or invalid) and guidance in the selection of a reasonable general provision in those instances where no standard exists today.1.1 This practice provides guidance for providing user instructions for treestands.1.2 The values stated are in inch-pound units and are to be regarded as standard.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Treestand Instructions

ASTM F1750-05 彩弹枪加螺纹推进装置接口的标准规范

1.1 This specification covers the male and female threaded connectors used to interface a propellant source of 10 342 kPa (1800 psig) or less to a paintball gun. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Specification for Paintball Marker Threaded-Propellant Source Interface

BS EN 892:2004 登山设备.动力登山绳.试验方法和安全性要求

This document specifies safety requirements and test methods for dynamic ropes (single, half and twin ropes) in kernmantel construction for use in mountaineering including climbing.

Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods

NF S52-747-2:2004 滑雪板.捆绑安装区.第2部分:刀片式滑雪板的要求和试验方法

Snowboards - Binding mounting area - Part 2 : requirements and test methods for snowboards with inserts.

KS G ISO 10958-1:2004 滑雪板.捆绑安装区.第1部分:非插入式滑雪板的要求和试验方法

이 규격은 기능성 부분인 스노보드 바인딩 부츠의 적합성을 최적화하기 위하여 성인 또는 청소

Snowboards-Binding mounting area-Part 1:Requirements and test methods for snowboards without inserts

KS G 5817-2004 登山装备.冰墙工具.安全要求事项和测试方法

이 규격은 등반을 포함한 등산에 이용하는 빙벽 용구에 관한 안전 요구 사항 및 시험 방법에

Mountaineering equipment-Ice-tools-Safety requirements and test methods

NF S52-401/A1:2004 社区运动设备.滑板、四轮滑冰鞋、单排轮滑板和双排轮滑板的结构

Neighbourhood sports equipment - Structures for skate boards, roller skates, in-line skates and bicross.

QB/T 1476-2004 钓鱼竿

本标准规定了钓鱼竿的分类与标记、要求、试验方法、检验规则、标志、标签、包装、运输及贮存。 本标准适用于复合材料钓鱼竿。

Fishing rod

ISO 10958-2:2004 滑雪板.捆绑安装区.第2部分:刀片式滑雪板的要求和试验方法

This part of ISO 10958 specifies requirements and test methods for snowboards on which bindings are attached by means of inserts that are not removable and screws. This part of ISO 10958 does not apply to snowboards for children with a mass less then 25 kg. It contains data for the manufacturer of snowboards, bindings and retention devices concerning dimensions, tests and other specifications for the binding mounting area. For dimensions with no tolerance indicated, a tolerance of ±1 mm is valid.

Snowboards - Binding mounting area - Part 2: Requirements and test methods for snowboards with inserts

ANSI/NGCMA Z130.1-2004 高尔夫球车.安全和性能要求

Developed to establish safety specifications for the design and operation of golf cars driven by electric motors and internal combustion engines with respect to speed, acceleration, stability, braking systems, operational controls, electrical systems, fuel systems, and general configurations. A specified safety warning label lists the major safety and precautionary operating measures to be observed. Safety codes and standards are intended to enhance public health and safety.

Golf Cars – Safety and Performance Requirements