Y56 体育用品 标准查询与下载

ASTM F1045-04 冰球运动用头盔的标准性能规范

1.1 This performance specification covers performance requirements for ice hockey helmets.1.2 The intent of this performance specification is to reduce the risk of injury to the head without compromising the form and appeal of the game.1.3 This performance specification covers: (1) performance tests for shock absorption properties of the complete helmet and strength and elongation of the chin strap and its attachment; and (2) requirements for area of coverage and penetration.1.4 The values as stated in inch-pound units are to be regarded as the standard. The values in parentheses are given for information only.1.5 The following precautionary caveat pertains only to the test methods portion, Section 12, of this performance specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Ice Hockey Helmets

ASTM F1890-04 测量垒球球棒性能因数的标准试验方法

1.1 This test method covers a method for determining bat performance by measuring the bat-ball coefficient of restitution (BBCOR), deriving the bat performance factor (BPF) and calculating a batted ball speed (BBS). It is applicable to softball bats of any construction or material. The method provides a quantitative measure of bat dynamic performance that may be used for comparison purposes.1.2 The BBCOR, BPF, and BBS are each calculated from measurements taken in the laboratory on test equipment meeting the requirements defined in this specification.1.3 The values stated in inch-pound units are to be regarded as the standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Test Method for Measuring Softball Bat Performance Factor

ASTM F504-04 高山滑雪板装配的准静态松开力矩测量的标准试验方法

1.1 This test method covers a procedure for the measurement of release moments of ski bindings under conditions where inertia loadings of the ski binding system are not significant.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measuring the Quasi-Static Release Moments of Alpine Ski Bindings

ASTM F939-04 高山滑雪板装配的松开扭矩值选择的标准实施规范

1.1 This practice provides procedures for the selection of release torque values for Alpine ski/boot/bindings systems. These procedures may be used by ski binding manufacturers in their instructions for installation and use and by ski shops for the adjustment of already mounted ski bindings.1.2 This practice is applicable to releasable Alpine ski/boot/binding systems.1.3 Release torque values selected using this practice may not be appropriate for circumstances in which:1.3.1 The skier carries an object that significantly increases the skier's effective body weight,1.3.2 The skier grasps or in some manner controls an object such as a sled, or1.3.3 The skier encounters exceptional snow or terrain conditions not commonly found on developed ski slopes.1.4 This practice may be inappropriate for nonmechanical bindings or bindings used with boots that reach more than half way up the lower leg.1.5 Release torque values outside the recommendations of this practice may increase the risk of injury to the skier. However, skiers who are informed of this potential risk may request such settings and have them provided, subject to any guidelines and limitations specified by the binding manufacturer.1.6 These values refer to recommended release torque for initial adjustment of a ski binding and subsequent readjustment of the binding during routine maintenance or following a suspected malfunction. However, these values are not intended to apply to the condition of the equipment at any time after it is put into use.1.6.1 For information concerning applicable tolerances to be used for the adjustment and inspection of releasable Alpine ski bindings in retail operations consult Practice F 1063; for rental applications consult Practice F 1064 .1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Selection of Release Torque Values for Alpine Ski Bindings

ASTM F1881-04 测量棒球球棒性能因数的标准试验方法

1.1 This specification defines a method for determining bat performance by measuring the bat-ball coefficient of restitution (BBCOR), deriving the bat performance factor (BPF), and calculating batted-ball speed (BBS). It is applicable to baseball bats of any construction or material. The method provides a quantitative measure of bat dynamic performance that may be used for comparison purposes.1.2 The BBCOR, BPF, and BBS are each calculated from measurements taken in the laboratory on test equipment meeting the requirements defined in this test method.1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.1.4 This standard does not purport to address all the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measuring Baseball Bat Performance Factor

ASTM F1937-04(2010) 马术运动和骑马用身体防护设备的标准规范

1.1 This specification covers minimum performance criteria and describes test methods for body protectors for use in horse sports and horseback riding. 1.2 It is not the intention of this specification to bar from consideration materials of improved quality or performance not known at the time of development of this specification. 1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Body Protectors Used in Horse Sports and Horseback Riding

ASTM F910-04(2010) 少年棒球运动员用面部保护罩的标准规范

1.1 This specification covers protective face guards for sports such as youth baseball (batters and baserunners). 1.2 This type of face guard is designed to be attached to a pre-existing helmet. 1.3 The equipment covered by this specification is intended to reduce hazards of injury to the face, including eyes and mouth, due to impacts from baseballs or softballs. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 The following precautionary caveat pertains only to the test method portion, Section 5, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Face Guards for Youth Baseball

ASTM F1063-04 高山滑雪板/绑带/靴系统功能检验和调试的标准操作规程

1.1 This practice provides procedures for inspection and adjustment of alpine ski/binding/boot systems.1.2 This practice should be followed for systems, whether newly mounted or previously mounted, when work is performed on the system that may affect its release function, unless otherwise specified by the binding manufacturer in non-rental applications.1.3 Nonapplicability of this function and release inspection practice to rental shop operations is based upon the existence of applicable ASTM practices.Note 18212;Refer to Practice F 1064 for equivalent procedures and tolerances for complete and incomplete rental systems.

Standard Practice for Functional Inspections and Adjustments of Alpine Ski/Binding/Boot Systems

ASTM F1163-04 马术运动和骑马用防护帽的标准规范

1.1 This specification covers minimum performance criteria and describes test methods for protective headgear for use in horse sports and horseback riding. 1.2 It is not the intention of this specification to bar from consideration materials of improved quality or performance not known at the time of development of this specification. 1.3 All testing and requirements of this specification shall be in accordance with Test Methods F 1446, except where noted herein. 1.4 The values stated in SI units are to be regarded as standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Protective Headgear Used in Horse Sports and Horseback Riding

ASTM F1163-04a 马术运动和骑马用防护帽的标准规范

1.1 This specification covers minimum performance criteria and describes test methods for protective headgear for use in horse sports and horseback riding. 1.2 It is not the intention of this specification to bar from consideration materials of improved quality or performance not known at the time of development of this specification. 1.3 All testing and requirements of this specification shall be in accordance with Test Methods F 1446, except where noted herein. 1.4 The values stated in SI units are to be regarded as the standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Protective Headgear Used in Horse Sports and Horseback Riding

ASTM F1882-04 家用篮球设备的标准规范

1.1 This specification covers the manufacture, assembly, recommended maintenance and use of complete residential basketball systems.1.2 This specification is intended to reduce the potential hazards associated with the installation and use of residential basketball systems.1.3 This specification is not intended to apply to the following:1.3.1 Equipment intended to be used in places of public assembly, such as, but not limited to, schools, parks, public and private recreational facilities.1.3.2 Individual components, such as rim, backboard, pole, portable base system, net, or other component when that component is not sold as a complete residential basketball system as defined in this specification.1.3.3 Any residential basketball system that is mounted to any structure or surface other than that which is purchased as part of a complete residential basketball system. Examples include, but are not limited to, roof mounting, wall mounting, or any locally or self-manufactured components.1.3.4 Any basketball equipment that does not use a full size rim, 18-in. (45.72-cm) diameter, or is designed for operational heights of less then 6 ft 6 in. (1.98 m) from the playing surface to the bottom of the backboard.1.3.5 Accessories and add-ons.1.4 This specification shall apply only to products manufactured after six months from the date this specification is published.1.5 This specification does not cover product performance or quality, except as related to safety.1.6 The tests are intended to uncover hazards, rather than to demonstrate the reliability of the system. The fact that a mechanism or material of a system fails during testing only is relevant if the failure creates a potential hazard.1.7 The rationale for provisions in this specification are given in Appendix X1 and Appendix X2.1.8 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Residential Basketball Systems

ASTM F1163-04a(2011) 骑马运动和骑马行驶用防护帽的标准规范

1.1 This specification covers minimum performance criteria and describes test methods for protective headgear for use in horse sports and horseback riding. 1.2 It is not the intention of this specification to bar from consideration materials of improved quality or performance not known at the time of development of this specification. 1.3 All testing and requirements of this specification shall be in accordance with Test Methods F1446, except where noted herein. 1.4 The values stated in SI units are to be regarded as the standard. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Protective Headgear Used in Horse Sports and Horseback Riding

ASTM F1544-04 测定弓箭额定速率的标准规范

1.1 This specification covers the testing technique to determine the rating velocity of an archery bow. 1.2 This specification will provide only a certification of performance; that is, the velocity at which a given bow will launch an arrow of a specified weight under standard conditions. 1.3 This specification is not intended to provide any engineering or structural evaluation of the bow that would determine its fitness for the use intended, safe function, or any other attribute except as stated. 1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 The following safety hazards caveat pertains only to the test methods portion, Section 4, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Determining the Rating Velocities of an Archery Bow

ASTM F1107-04 有关滑雪板的名词术语

1.1 This terminology covers terms used to describe the geometry and common hardware used on snowboard skis, snowboard bindings, and snowboard boots.

Standard Terminology Relating to Snowboarding

ASTM F910-04 少年棒球运动员用面部保护罩的标准规范

1.1 This specification covers protective face guards for sports such as youth baseball (batters and baserunners).1.2 This type of face guard is designed to be attached to a pre-existing helmet.1.3 The equipment covered by this specification is intended to reduce hazards of injury to the face, including eyes and mouth, due to impacts from baseballs or softballs.1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.5 The following precautionary caveat pertains only to the test method portion, Section 5, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Face Guards for Youth Baseball

ASTM F2219-04 高速棒球球棒性能因数测量的标准试验方法

1.1 This specification defines a method for determining bat performance by measuring the bat-ball coefficient of restitution (BBCOR), deriving the bat performance factor (BPF), deriving the ball exit speed ratio (BESR), and calculating a batted-ball speed (BBS). It is applicable to baseball and softball bats of any construction or material. The method provides a quantitative measure of bat dynamic performance that may be used for comparison purposes.1.2 The BBCOR, BPF, BESR, and BBS are each calculated from measurements taken in the laboratory on test equipment meeting the requirements defined in this specification.1.3 The values stated in English units are to be regarded as the standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Measuring High Speed Baseball Bat Performance Factor

KS G 5701-2003 橡皮球

이 규격은 형가황법으로 제조한 운동용 고무공(이하 고무공이라 한다.)에 대하여 규정한다

Sporting rubber balls

KS G ISO 10958-2:2003 滑雪板.捆绑安装区.第2部分:刀片式滑雪板的要求和试验方法

일부를 구성하는 이 규격은 제거되지 않는 인서트와 나사못에 의해 바인딩이 부착되는 스노보드

Snowboards-Binding mounting area-Part 2:Requirements and test methods for snowboards with inserts

KS G ISO 7139:2003 越野雪橇.弹性的测定

이 규격은 크로스컨트리 스키의 탄성 특성을 결정하는 실험 방법을 규정한다. 이 규격의

Cross-country skis－Determination of elastic properties

KS G 5804-2003 登山运动装备.绳索夹具.安全要求和测试方法

이 규격은 산악ㆍ등산용 로프 클램프에 관한 안전 요구 사항과 시험 방법을 규정한 것이다

Mountaineering equipment-Rope clamp-Safety requirements and test methods