Y56 体育用品 标准查询与下载

BS ISO 9462:2014 高山雪撬扣拴.试验方法和要求

Alpine ski-bindings. Requirements and test methods

ISO 13992:2014 高山滑雪板装配.要求和试验方法

This International Standard specifies the main characteristics of touring ski-bindings and describes, as an example, the test methods A and B. This International Standard applies, in principle, to touring ski-bindings for alpine skiing for children, juniors, and adults. NOTE As specific touring boots and bindings for children do not exist in the market at present, the scope of this International Standard is limited for the moment to bindings for juniors and adults.

Alpine touring ski-bindings - Requirements and test methods

EN 13138-1:2014 救生设备.1部分:安全要求和试验方法

This European Standard specifies safety requirements for construction, performance, sizing, marking and information supplied by the manufacturer for swimming aids intended to assist beginners with movement through the water while learning to swim or while learning part of a swimming stroke. It also gives methods of test for verification of these requirements. This part 1 of EN 13138 applies only to devices that are designed to be worn, to be securely attached to the body and which have either inherent buoyancy or can be inflated. It only applies to Class B devices intended to introduce the user to the range of swimming strokes. It does not apply to Class A or Class C devices, to pull buoys, swim rings, lifebuoys, buoyancy aids, lifejackets or aquatic toys.

Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn

EN 13451-4:2014 游泳池设备.第4部分:出发台的附加特殊安全要求及测试方法

This European Standard specifies safety requirements for starting platforms in addition to the general safety requirements of EN 13451-1:2011 and should be read in conjunction with it. The requirements of this specific standard take priority over those in EN 13451-1:2011. This European Standard is applicable to manufactured starting platforms for use in competition and training in classified swimming pools as specified in EN 15288-1 and EN 15288-2.

Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms

ISO 9462:2014 高山雪橇固定装置.要求和试验方法

This International Standard specifies the main characteristics of ski-bindings and describes, as an example, the test methods A and B. This International Standard applies to ski-bindings for alpine skiing for children, juniors, and adults.

Alpine ski-bindings - Requirements and test methods

EN 13451-5:2014 游泳池设备.第5部分:泳道线的附加特殊安全要求及测试方法

This European Standard specifies safety requirements for lane lines and dividing line in addition to the general safety requirements of EN 13451-1:2011 and should be read in conjunction within it. The requirements of this specific standard take priority over those in EN 13451-1:2011. This part of EN 13451 is applicable to manufactured lane lines for use in competition and training and dividing line for use in classified swimming pools as specified in EN 15288-1 and EN 15288-2.

Swimming pool equipment - Part 5: Additional specific safety requirements and test methods for lane lines and dividing line

QB/T 4727-2014 钓具 钓鱼竿支架

本标准规定了钓鱼竿支架的术语和定义、分类、要求、试验方法、检验规则和标志、包装、运输、贮存。本标准适用于钓具钓鱼竿支架(以下简称“支架”)。

Fishing tackle.Rod pod

QB/T 4728-2014 封闭式鱼线轮

本标准规定了封闭式鱼线轮的术语和定义、要求、试验方法、检验规则和标志、使用说明书、包装、运输、贮存。本标准适用于用钓竿钓鱼时,收、放线使用的封闭式鱼线轮(以下简称“鱼轮”)。本标准不适用于其他类型的鱼线轮。

Spincast reel

QB/T 1475-2014 旋压式鱼线轮

本标准规定了旋压式鱼线轮的术语和定义、产品分类、要求、试验方法、检验规则和标志、使用说明书、包装、运输、贮存。本标准适用于用钓竿钓鱼时,收、放线使用的旋压式鱼线轮(以下简称“鱼轮”)。本标准不适用于其他类型的鱼轮。

Spinning reel

QB/T 4726-2014 钓鱼竿配件 导眼 轮座 卡箍

本标准规定了钓鱼竿导眼、钓鱼竿轮座、钓鱼竿卡箍的术语和定义、分类、要求、试验方法、检验规则和标志、包装、运输、贮存。本标准适用于钓鱼竿配件--导眼、轮座、卡箍。

Fishing rods accessories.Guides.Reel seat.Clamp

QB/T 4756-2014 围棋

本标准规定了围棋的术语和定义、分类、要求、试验方法、检验规则和标志、包装、运输、贮存。本标准适用于以玻璃(含琉璃)、塑料、陶(精)瓷、玉石和贝壳为原料制作的围棋。

Wei qi

BS EN 13277-3:2013 武术用防护设备.躯干护具的附加要求和试验方法

Protective equipment for martial arts. Additional requirements and test methods for trunk protectors

NF X50-847-1*NF EN ISO 24801-1:2014 娱乐潜水设备.水下自持呼吸器的潜水员培训要求.第1部分:1级.被监督的潜水员

La présente partie de l'ISO 24801 spécifie d'une part les compétences nécessaires pour qu'un plongeur en scaphandre autonome puisse être qualifié par un organisme de formation qui atteste qu'il maîtrise a minima les compétences s'appliquant aux plongeurs en scaphandre autonome de niveau 1 ("Plongeur encadré") et, d'autre part, les critères d'évaluation de ces compétences.

Recreational diving services - Requirements for the training of recreational scuba divers - Part 1 : level 1 - supervised diver

EN 1809:2014 潜水装备.浮力补偿器.功能和安全要求,试验方法

This European Standard specifies functional, safety requirements and test methods applicable to inflatable type buoyancy compensating devices intended to provide divers with means for controlling buoyancy and if applicable, means for carrying the breathing equipment and/or carrying the weights. This European Standard is not applicable to other kinds of personal equipment such as life preservers, personal flotation or rescue devices including combined buoyancy and rescue devices.

Diving equipment - Buoyancy compensators - Functional and safety requirements@ test methods (Incorporates Amendment A1: 2016)

BS ISO 21103:2014 探险旅游. 参与者须知

Adventure tourism. Information for participants

DIN EN 13277-3:2014 武术用防护设备. 第3部分: 躯干护具的补充要求和试验方法; 德文版本EN 13277-3-2013

Protective equipment for martial arts - Part 3: Additional requirements and test methods for trunk protectors; German version EN 13277-3:2013

DIN EN 12270:2014 登山设备. 导缆索. 安全要求和试验方法; 德文版本EN 12270-2013

Mountaineering equipment - Chocks - Safety requirements and test methods; German version EN 12270:2013

DIN EN 12276:2014 登山装备. 摩擦型锚固. 安全要求和试验方法; 德文版本EN 12276-2013

Mountaineering equipment - Frictional anchors - Safety requirements and test methods; German version EN 12276:2013

EN 13451-11:2014 游泳池设备.第11部分:可移动游泳池地板和护岸的附加特殊安全要求及测试方法

This part of EN 13451 specifies safety requirements for moveable pool floors and moveable bulkheads in addition to the general safety requirements of EN 13451-1 and should be read in conjunction with it. The requirements of this part of EN 13451 take priority over those in EN 13451-1. This part of EN 13451 is applicable to manufactured moveable pool floors and moveable bulkheads for use in classified swimming pools as specified in EN 15288-1 and EN 15288-2.

Swimming pool equipment - Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads

ASTM F2291-14 娱乐骑乘设备及装置设计的标准实施规程

4.1 The purpose of this practice is to provide designers, engineers, manufacturers, owners, and operators with criteria and references for use in designing amusement rides and devices or a major modification for amusement rides or devices. 1.1 This practice establishes criteria for the design of amusement rides, devices and major modifications to amusement rides and devices manufactured after the effective date of publication except as noted in 1.2. 1.2 This practice shall not apply to: 1.2.1 Patron directed amusement rides or devices (for example, go karts, bumper cars, bumper boats), 1.2.2 Artificial climbing walls, 1.2.3 Air-supported structures, 1.2.4 dry slides, 1.2.5 coin operated rides, 1.2.6 Amusement rides or devices that involve the purposeful immersion of the patron's body partially or totally in the water and involves more than incidental patron water contact (for example, pools, water slides, lazy rivers, interactive aquatic play devices), 1.2.7 Amusement rides and devices whose design criteria are specifically addressed in another ASTM standard, 1.2.8 Portions of an amusement ride or device unaffected by a major modification, 1.2.9 Upgrades to electrical wiring, electrical motors and electrical components of amusement rides and devices provided the original design and safety criteria are maintained or enhanced, and 1.2.10 Pre-existing designs manufactured after the effective date of publication of this practice if the design is service proven or previously compliant and the manufacturer provides: 1.2.10.1 A historical summary of the amusement ride, device or major modification, and 1.2.10.2 A statement that the design is service proven or previously compliant as specified by Section 3. 1.2.10.3 Amusement rides and devices, and major modifications to amusement rides and devices may qualify as “previously compliant” for five years following the date of publication of this practice. Thereafter, amusement rides and devices, and major modifications to amusement rides and devices must qualify as “service proven” or meet the requirements of this practice. 1.3 This practice includes an annex (mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, and so forth) to improve the user's understanding and application of the criteria presented in this practice. The annex information shall be interpreted as mandatory design criteria. 1.4 This practice includes an appendix (non-mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, and so forth.) to improve the user's understanding and application of the criteria presented in this practice. The appendix information shall not be interpre......

Standard Practice for Design of Amusement Rides and Devices