体育用品标准-分析测试百科网

ASTM D7268-14 包括密集织物和游泳衣的集密编织服饰的标准性能规范

4.1 Upon mutual agreement between the purchaser and the supplier, seamless knit garments intended for this end use should meet all of the requirements listed in Table 1 of this specification.TABLE 1 Specification Requirements Characteristic Requirements 8199;Section Bursting Strength lt;5 oz 30 lb/in2 8199;8199; Colorfastness 8201;8201;LaunderingA Color Change 4.0 Min

Standard Performance Specification for Seamless Knit Garments Including Intimates and Swimwear

ICS: 61.020 (Clothes)
CCS: Y56
发布: 2014
实施

ASTM F2291-14 娱乐骑乘设备及装置设计的标准实施规程

4.1 The purpose of this practice is to provide designers, engineers, manufacturers, owners, and operators with criteria and references for use in designing amusement rides and devices or a major modification for amusement rides or devices. 1.1 This practice establishes criteria for the design of amusement rides, devices and major modifications to amusement rides and devices manufactured after the effective date of publication except as noted in 1.2. 1.2 This practice shall not apply to: 1.2.1 Patron directed amusement rides or devices (for example, go karts, bumper cars, bumper boats), 1.2.2 Artificial climbing walls, 1.2.3 Air-supported structures, 1.2.4 dry slides, 1.2.5 coin operated rides, 1.2.6 Amusement rides or devices that involve the purposeful immersion of the patron's body partially or totally in the water and involves more than incidental patron water contact (for example, pools, water slides, lazy rivers, interactive aquatic play devices), 1.2.7 Amusement rides and devices whose design criteria are specifically addressed in another ASTM standard, 1.2.8 Portions of an amusement ride or device unaffected by a major modification, 1.2.9 Upgrades to electrical wiring, electrical motors and electrical components of amusement rides and devices provided the original design and safety criteria are maintained or enhanced, and 1.2.10 Pre-existing designs manufactured after the effective date of publication of this practice if the design is service proven or previously compliant and the manufacturer provides: 1.2.10.1 A historical summary of the amusement ride, device or major modification, and 1.2.10.2 A statement that the design is service proven or previously compliant as specified by Section 3. 1.2.10.3 Amusement rides and devices, and major modifications to amusement rides and devices may qualify as “previously compliant” for five years following the date of publication of this practice. Thereafter, amusement rides and devices, and major modifications to amusement rides and devices must qualify as “service proven” or meet the requirements of this practice. 1.3 This practice includes an annex (mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, and so forth) to improve the user's understanding and application of the criteria presented in this practice. The annex information shall be interpreted as mandatory design criteria. 1.4 This practice includes an appendix (non-mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, and so forth.) to improve the user's understanding and application of the criteria presented in this practice. The appendix information shall not be interpre......

Standard Practice for Design of Amusement Rides and Devices

ICS: 97.200.50 (Toys)
CCS: Y56
发布: 2014
实施

ASTM F2950-14 英式足球球门的标准安全和性能规格

1.1 This standard specifies safety and performance requirements aimed at providing safer soccer goals and thereby reducing injuries and fatalities. 1.2 This standard applies to all soccer goals with a total weight greater than 40 lb when weighed in accordance with 7.1.1 and 7.1.2. 1.3 This standard supersedes Specification F2056-09. 1.4 This standard supersedes Specification F2673-08. 1.5 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Safety and Performance Specification for Soccer Goals

ICS: 97.220.10 (Sports facilities); 97.220.40 (Outdoor
CCS: Y56
发布: 2014
实施

QB/T 2228-2013 扑克牌

本标准规定了扑克牌的术语和定义、分类及组成、要求、试验方法、检验规则和标志、包装、运输、贮存。本标准适用于纸质扑克牌。

Playing cards

ICS: 97.200
CCS: Y56
发布: 2013-12-31
实施: 2014-07-01

BS 7928:2013 板球运动员头部防护用具规范

This British Standard specifies the requirements for the materials, construction, markings and information to be supplied for head protectors to be worn by cricketers in adult and junior cricket.

Specification for head protectors for cricketers

ICS: 13.340.20;97.220.40
CCS: Y56
发布: 2013-12-31
实施: 2013-12-31

NF S52-361*NF EN 12276:2013 登山设备.摩擦锚链.安全性要求和试验方法

Mountaineering equipment - Frictional anchors - Safety requirements and test methods

ICS: 97.220.40
CCS: Y56
发布: 2013-12-13
实施: 2013-12-13

NF S52-342*NF EN 12270:2013 登山设备 - 导缆索 - 安全要求和试验方法

Mountaineering equipment - Chocks - Safety requirements and test methods

ICS: 97.220.40
CCS: Y56
发布: 2013-12-13
实施: 2013-12-13

EN 13277-3:2013 武术防护设备.第3部分:身体保护器的附加要求和试验方法

This European Standard specifies additional requirements and test methods for trunk protectors used in unarmed martial arts such as taekwondo, karate, kick-boxing and similar disciplines. It also applies to breast protectors for men. For general requirements and test methods for protective equipment for martial arts, see EN 13277-1.

Protective equipment for martial arts - Part 3: Additional requirements and test methods for trunk protectors