Y62 家用清洁、整容器具 标准查询与下载

IEC 60456:2010/COR1:2011 家用洗衣机性能测量方法

Clothes washing machines for household use - Methods for measuring the performance

BS 8525-2:2011 洗涤水系统.家用洗涤水处理设备.要求和试验方法

This part of BS 8525 specifies requirements and gives methods of test for packaged and/or site-assembled domestic greywater treatment equipment. This standard applies to treatment equipment where all prefabricated components are factory- or site-assembled by one manufacturer and tested as a single unit. This part of BS 8525 does not require specific water treatment processes to be used. However, it applies to equipment that treats bathroom greywater so that it is of a quality suitable for prescribed domestic uses in residential, commercial, industrial or public premises. It is not applicable to treatment equipment which processes waste from WCs and kitchens. The test methods described in Annex B and Annex D have been devised for the type testing of domestic greywater treatment equipment with a nominal treatment capacity of up to 10 m3 per day. They are intended to be carried out on greywater treatment equipment under controlled conditions using public mains water and synthetic greywater. These test methods are not intended for commissioning or validation of the on-site performance of the domestic greywater treatment equipment. NOTE 1 Recommendations for the installation, commissioning and validation of on-site performance of packaged and/or site-assembled domestic greywater treatment equipment as part of a greywater system are given in BS 8525-1. NOTE 2 Annex A specifies requirements for the greywater treatment equipment test set-up and preparation; Annex B to Annex D specify greywater treatment equipment test methods; Annex E and Annex F are informative annexes, the former giving recommendations regarding analytical methods and the latter providing an example of a product information sheet.

Greywater systems. Domestic greywater treatment equipment. Requirements and test methods

DIN EN 60335-2-54 Berichtigung 1:2011 家用和类似用途电器.安全性.第2-54部分:使用液体或蒸汽的家用表面清洁器的特殊要求(IEC 60335-2-54-2008);德文版本EN 60335-2-54-2008,DIN EN 60335-2-的技术勘误

Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam (IEC 60335-2-54:2008); German version EN 60335-2-54:2008, Corrigendum to DIN EN 60335-2-

IEC 60312-1:2010/AMD1:2011 家用真空吸尘器.第1部分:干用真空吸尘器.测量性能用方法

This International Standard is applicable for measurements of the performance of dry vacuum cleaners for household use in or under conditions similar to those in households. The purpose of this standard is to specify essential performance characteristics of dry vacuum cleaners being of interest to the users and to describe methods for measuring these characteristics. NOTE 1 Due to influence of environmental conditions@ variations in time@ origin of test materials and proficiency of the operator@ most of the described test methods will give more reliable results when applied for comparative testing of a number of appliances at the same time@ in the same laboratory and by the same operator. NOTE 2 This standard is not intended for battery-operated vacuum cleaners. For safety requirements@ reference is made to IEC 60335-1 and IEC 60335-2-2.

Vacuum cleaners for household use - Part 1: Dry vacuum cleaner - Methods for measuring performance

DB37/T 1864-2011 山东省环境友好型产品技术要求 坐便洁身器

Technical Requirements for Environmentally Friendly Products in Shandong Province

DIN EN 60335-2-11:2011 家用和类似用途电器.安全性.第2-11部分:滚筒式烘干机的详细要求(IEC 60335-2-11-2008,修改).德文版本EN 60335-2-11-2010

Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers (IEC 60335-2-11:2008, modified); German version EN 60335-2-11:2010

UL 141-2011 衣服熨烫设备

UL Standard for Safety Garment Finishing Appliances (Ninth Edition; Reprint with revisions through and including September 27, 2011)

KS B ISO 8230-1:2011 干洗机的安全要求.第1部分:通用安全要求

이 표준은 드라이클리닝 기계에 대한 일반 안전 요건을 규정한다.이는 섬유, 가죽,

Safety requirements for dry-cleaning machines-Part 1:Common safety requirements

KS B ISO 8230-2:2011 干洗机的安全要求.第2部分:使用四氯乙烯的机械

이 표준은 클리닝 매개체로서 퍼클로로에틸렌(이하 “퍼크”라 함.)만을 사용하는 드라이클리닝

Safety requirements for dry-cleaning machines-Part 2:Machines using perchloroethylene

KS B ISO 8230-3:2011 干洗机的安全要求.第3部分:使用易燃溶剂的机械

이 표준은 클리닝제로 KS B ISO 8230-1에 정의된 가연성 용매를 사용하는 드라이클

Safety requirements for dry-cleaning machines-Part 3:Machines using combustible solvents

ANSI C10-2011 商业厨房排气系统清洁标准

This standard is to determine the need for commercial kitchen exhaust cleaning through inspection principles; to define acceptable methods for cleaning exhaust systems and components; and to define acceptable post-cleaning cleanliness levels.

Standard for Cleaning of Commercial Kitchen Exhaust Systems

ANSI/ASTM F888:2011 真空吸尘器主灰尘收集器最大功能容积测量方法

Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner

ANSI/ASTM F2609:2011 真空吸尘器的垃圾清洁处理效果的试验方法

Test Method For Litter-Cleaning Effectiveness Of Vacuum Cleaners

ANSI/UL 561-2011 地板整理机用安全性标准

Adds component requirements to the body of the standard and incorporates specific component requirements that are being applied within the end product requirements.

Standard for Safety for Floor-Finishing Machines (Proposal dated 5/13/11)

ANSI/ASTM F2105:2011 测定真空除尘器马达/风扇系统空气特性的试验方法

Test Method For Measuring Air Performance Characteristics Of Vacuum Cleaner Motor/Fan Systems

ANSI/ASTM F820:2011 中央真空吸尘系统空气性能特征试验方法

Test Method For Measuring Air Performance Characteristics Of Central Vacuum Cleaning Systems

ANSI/ASTM F884:2011 内置集中式真空吸尘器的电动机寿命评定的试验方法

Test Method For Motor Life Evaluation Of A Built-In Central Vacuum Cleaner

ANSI/ASTM F1601:2011 中央真空吸尘系统电动管嘴马达寿命评估试验方法

Test Method For Motor Life Evaluation Of An Electric Motorized Nozzle For Central Vacuum Cleaning Systems

ANSI/ASTM F2756:2011 测定真空吸尘器能量消耗的标准试验方法

Test Method for Test Method for Determining Energy Consumption of Vacuum Cleaners

ASTM F2105-11 测量真空吸尘发动机/风扇系统空气性能特征的标准试验方法

The test results allow the comparison of the maximum air power at the vacuum cleaner motor/fan system inlet under the conditions of this test method.1.1 This test method covers procedures for determining air performance characteristics of series universal motor/fan systems used in commercial and household upright, canister, stick, hand-held utility, combination-type vacuum cleaners, and household central vacuum cleaning systems.1.2 These tests and calculations include determination of suction, airflow, air power, maximum air power, and input power under specified operating conditions.Note 1For more information on air performance characteristics, see References () through ().1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems