Y62 家用清洁、整容器具 标准查询与下载

ASTM F2756-11 真空吸尘器能量消耗标准试验方法

This test method provides an indication of the amount of energy usage of the vacuum cleaner while operating over a specified cleaning area at a specified stroke speed and total number of cleaning strokes. The test area is divided into a number of strips, the strip being defined as the width of the power head or nozzle. For the purpose of this procedure, the cleaning area is specified as 10 m2 (15 500 in.2), the stroke speed is defined as 0.5 ± 0.03 m/s (1.7 ± 0.1 ft/s), with a total of 10 strokes per strip. In order to provide a uniform basis for measuring the performance described in 1.1, standardized test carpets are employed in this procedure.1.1 This test method covers only a laboratory test for determining the energy usage-of household and commercial upright, canister, stick, and wet/dry vacuum cleaners operating on carpet when tested under specified conditions. 1.1.1 This procedure may be used in conjunction with other performance criteria, such as cleaning effectiveness. 1.1.2 Vacuum cleaners, other than upright vacuum cleaners, that provide a carpet-cleaning function are tested in accordance with the carpet-cleaning instructions provided in the manufacturer’s instruction manual. If the manufacturer’s instruction manual does not contain instructions for a carpet-cleaning function, the vacuum cleaner is not within the scope of this procedure. 1.2 This test method is applicable to household and commercial types of vacuum cleaners. 1.3 The values stated in SI units are to be regarded as standard. The inch-pound units given in parentheses are mathematical conversions that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining Energy Consumption of Vacuum Cleaners

ANSI/ASTM F2756:2011 测定真空吸尘器能量消耗的标准试验方法

Test Method for Test Method for Determining Energy Consumption of Vacuum Cleaners

ASTM F2609-11 真空吸尘器的垃圾清洁处理效果的标准试验方法

This test method will provide an indication of the effectiveness of the vacuum cleaner in removing litter from carpet. No data exist to determine if the cleaning effectiveness in the laboratory will be the same as in home cleaning; however, in most cases, a vacuum cleaner that cleans well in the laboratory will clean well in a home. To provide a uniform basis for measuring the performance described in 1.1, standardized test carpet and standardized test litter are used.1.1 This test method covers a laboratory test for determining the relative carpet litter-cleaning effectiveness of household vacuum cleaners when tested under standard conditions. 1.2 This test method is applicable to household types of upright, canister, combination, and stick vacuum cleaners intended for cleaning carpeted floors as a primary or secondary function. 1.3 This test method applies only to the cleaning of litter from carpet, not the removal of embedded dirt. Litter is defined as material that typically clings to the surface of the carpet, such as pet or human hair, thread, and so forth. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Litter-Cleaning Effectiveness of Vacuum Cleaners

ASTM F820-11 测量中央真空吸尘系统空气性能特征的标准试验方法

The test results allow the comparison of the maximum air power available when no dirt has been introduced into the vacuum cleaning system, that is, a completely clean filter or an empty, clean dirt container.1.1 This test method covers procedures for determining air performance characteristics of household central vacuum cleaning systems, which use a flexible cleaning hose assembly and incorporates a series universal motor(s). This test method does not apply to the carpet cleaning mode of operation where dirt or debris is involved.1.2 These tests and calculations include determination of suction, airflow, air power, maximum air power, and input power under standard operating conditions (see Note 0).Note 0For more information on air performance characteristics, see Refs ().1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. A specific precautionary statement is given in Note 0.

Standard Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems

ANSI/ASTM F1114:2011 商业用的热消毒筒,槽和架式水驱动旋转喷射器皿站规范

Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Station Rack Type Water-Driven Rotary Spray

ASTM F558-11 测量真空吸尘器空气动力性能的标准试验方法

The test results allow the comparison of the maximum potential air power available for cleaning tasks when tested under the conditions of this test method. The test results do not indicate the actual air power present during the cleaning process due to the effects of the various tools in use and surfaces being cleaned. During the nozzle on plenum chamber air performance testing, the brushroll is unloaded and this condition is not representative of the brushroll being in contact with carpet or other surfaces being cleaned. FIG. 1 Schematic Diagram of Meter Connections1.1 This test method covers procedures for determining air performance characteristics of commercial and household upright, canister, stick, hand-held, utility, and combination-type vacuum cleaners having provisions for attaching a hose and incorporating a series universal motor. This test method can be applied to the carpet cleaning mode of operation. 1.2 These tests and calculations include determination of suction, airflow, air power, maximum air power, and input power under standard operating conditions (see Note 1). The nozzle mounted on plenum testing is an ideal air performance measurement and is not intended to represent the actual air performance during carpet or floor cleaning. Note 18212;For more information on air performance characteristics, see Refs (1-6). 1.3 The foot-pound-inch system of units is used in this standard. The values in parentheses are given for information only. 1.4 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. A specific precautionary statement is given in Note 2.

Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners

ASTM F608-11 家用/商用真空吸尘器去除地毯内藏污物的效果评定标准试验方法

This test method provides an indication of the capability of the vacuum cleaner to remove embedded dirt from carpeting. This test method is based upon results of home cleaning tests so that, in most cases, a reasonable correlation exists between home and laboratory results. The amount of dirt picked up in the laboratory test may not be the same as in the home; however, it will show that, in most cases, a vacuum cleaner that performs well in the laboratory will perform well in a home. Laboratory results may differ due to variations in the homes, carpets, dirt, and other factors (see Section 6). In order to provide a uniform basis for measuring the performance described in 1.1, standardized test carpets and a standardized test dirt are employed in this procedure.1.1 This test method covers only a laboratory test for determining the relative carpet dirt removal effectiveness of household/commercial vacuum cleaners when tested under specified conditions. 1.2 This test method is applicable to household/commercial types of upright, canister, and combination cleaners. 1.3 The test method applies to embedded dirt removal from carpets, not the removal of surface litter and debris. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners

ASTM F1411-11 为用户提供选择真空吸尘器的信息标准操作规程

1.1 This practice identifies the method of presenting information on selected performance and physical characteristics of a residential vacuum cleaner. 1.2 This information is intended to assist the consumer in comparing selected characteristics of vacuum cleaner models. 1.3 It is also intended that this information be presented in a manner that is meaningful and understandable to the consumer. 1.4 The characteristics are selected from those for which ASTM test methods have been developed.

Standard Practice for Presenting Selected Information on Vacuum Cleaners for Consumer Use

ANSI/NFPA 32-2011 干洗装置标准

1.1 Scope. This standard shall apply to establishments hereinafter defined as drycleaning plants.

Standard for Drycleaning Plants

ASTM F655-11 真空吸尘器测试用试验地毯和衬垫的标准规范

1.1 This specification provides construction details and a replacement procedure for the standard carpet and pad to be used when testing vacuum cleaners.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Specification for Test Carpets and Pads for Vacuum Cleaner Testing

ASTM F2105-11 测量真空吸尘发动机/风扇系统空气性能特征的标准试验方法

The test results allow the comparison of the maximum air power at the vacuum cleaner motor/fan system inlet under the conditions of this test method.1.1 This test method covers procedures for determining air performance characteristics of series universal motor/fan systems used in commercial and household upright, canister, stick, hand-held utility, combination-type vacuum cleaners, and household central vacuum cleaning systems.1.2 These tests and calculations include determination of suction, airflow, air power, maximum air power, and input power under specified operating conditions.Note 1For more information on air performance characteristics, see References () through ().1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems

ANSI/UL 561a-2011 地板抛光机的安全标准(于2011年9月16日提出)

Recommended Failure Rate, Revised 16A.4.3

Standard for Safety for Floor-Finishing Machines (Proposal dated 9/16/11)

QB/T 4137-2010 家用和类似用途电动洗衣机用电子程序控制器技术要求

本标准规定了家用和类似用途电动洗衣机用电子程序控制器的术语和定义、产品分类、技术要求和试验方法。 本标准适用于单相额定电压不超过250V，在家用和类似用途电动洗衣机上使用的电子程序控制器。

Technical requirements for electronic program controller of household and similar electrical washing machines

QB/T 4136-2010 家用和类似用途电动洗衣机用电动机技术要求

本标准规定了家用和类似用途电动洗衣机用电动机的术语和定义、产品分类、要求和试验方法。 本标准适用于额定电压不超过380V，输出功率小于1000W，用于家用和类似用途电动洗衣机的洗涤和脱水电动机。

Technical requirements for motors of household and similar electric washing machine

QB/T 4107-2010 手动剃须刀

本标准规定了手动剃须刀的术语和定义、产品分类、要求、试验方法、检验规则和标志、标签、包装、运输、贮存。 本标准适用于剃刮胡须、剃刮人体毛发用的单刃面剃须刀。

Manual shaver

JIS S 2130:2010 家用燃气衣服烘干机

Gas burning clothes dryers for domestic use

UL SUBJECT 2158A-2010 SUBJECT 2158A 干衣机连接管调查大纲发布号:3

This new issue of the Outline of Investigation for Clothes Dryer Transition Duct is published to address clothes dryer transition ducts that may be assembled into two parts and may include sheet metal collars and clamps as part of the assembly.

SUBJECT 2158A OUTLINE OF INVESTIGATION FOR CLOTHES DRYER TRANSITION DUCT Issue Number: 3

DIN EN 60335-2-4:2010 家用和类似用途电器.安全性.第2-4部分:离心式脱水机的详细要求(IEC 60335-2-4-2008,修订本).德文版本EN 60335-2-4-2010

Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors (IEC 60335-2-4:2008, modified); German version EN 60335-2-4:2010

DIN EN 60335-2-7:2010 家用和类似用途电器.安全性.第2-7部分:洗衣机的详细要求(IEC 60335-2-7-2008,修订本).德文版本EN 60335-2-7-2010

Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines (IEC 60335-2-7:2008, modified); German version EN 60335-2-7:2010

DIN EN 60335-2-58:2010 家用和类似用途电器.安全性.第2-58部分:商用电洗碗机的详细要求(IEC 60335-2-58-2002,修改件+A1-2008).德文版本EN 60335-2-58-2005+勘误表2007+A1-2008+A11-2010

Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines, (IEC 60335-2-58:2002, modified + A1:2008); German version EN 60335-2-58:2005 + Corrigendum 2007 + A1:2008 + A11:2010