Y75 服装、鞋、帽综合 标准查询与下载

FZ/T 80011.2-2009 服装CAD电子数据交换格式.第2部分:排料数据

FZ/T 80011的本部分描述的是一种从一个CAD排料软件系统转换到另一个或者是转换到一个CAM排料软件系统的格式。 本部分不适用于曲线插值法或项目管理的定义。所有的曲线以离散型矢量存在并且由CAD软件的分辨率决定。本部分也不适用于代表样片之间或版样之间的尺寸关系，或在二维或三维缝纫产品样片的几何体之间对应，这需要另外制定二维或三维转换标准。 本部分涉及到当处理相同版样在不同的CAD系统里的数据时所受限制的不同。 本部分没有为排料数据交换指定文件格式，推荐使用XML文件格式。

Apparel CAD electronic data interchange format.Part 2:Marker data

FZ/T 80011.1-2009 服装CAD电子数据交换格式.第1部分:版样数据

FZ/T 80011的本部分适用于不同服装CAD之间，以及CAD/CAPP系统之间进行二维版样数据的交换，今后制定的三维数据交换标准需与此标准相兼容。 本部分定义的版样数据类型遵照产品数据表达和交换标准STEP，建议将STEP映射到XML(可扩展的标记语言)，使用XML文件格式进行版样数据文件交换。

Apparel CAD electronic data interchange format.Part 1:Pattern data

EN 12653:1999+A2:2009 鞋类、皮革和仿皮革制造机器.钉机.安全要求

This standard is applicable to nailing machines used in the footwear manufacturing industry, namely: heel attaching machines (see figure 1); heel nailing machines (see figure 2); gang nailing machines (see figure 3). This standard does not apply to gang nailing machines which comply in all respects with the requirements for seat lasting machines: see EN 931. This standard specifies safety requirements for the design and construction of nailing machines. No specific requirements are included for transport, commissioning and decommissioning. It takes account of intended use, foreseeable misuse and component and system failure. This standard covers all hazards relevant to the footwear manufacturing industry. Use of the machines within the scope of this standard in different industries may give rise to hazards which were not taken into account at the time of its preparation. This document is not applicable to nailing machines which are manufactured before the date of its publication as EN.

Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements

EN 12044:2005+A1:2009 鞋类、皮革和仿皮革制品制造机.切割和打孔机.安全要求

This European Standard specifies safety requirements for the design and operation of the machines defined in 1.2. It takes account of intended use, foreseeable misuse and component and system failure. This European Standard applies for cutting and punching machines used in the manufacture of footwear, leather and imitation leather goods and other related components. This European Standard applies to the following cutting and punching machines: swing arm cutting presses with manual or powered swing arm; manual and automatic travelling head cutting presses with powered travelling head; manual and automatic beam cutting presses; punching and perforating presses; C-frame cutting presses. This European Standard is not applicable to: mechanical presses; presses intended for working cold metal; fastening, riveting, stitching, stapling, bending or folding machines; guillotines, shears and similar machines; shoe and leather presses as described in EN 12203. This European Standard deals with all significant hazards, hazardous situations and events relevant to the footwear, leather and imitation leather goods manufacturing machinery defined in 1.2, when it is used as intended and under the conditions foreseen by the manufacturer (see Clause 4) and is intended for operation in applications by trained persons. This European Standard deals with material feeding and handling devices, when attached to the machine. This European Standard is not applicable to machines which are manufactured before the date of publication of this European Standard by CEN.

Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements

EN 930:1997+A2:2009 鞋类、皮革和仿皮革制品制造机.粗选、冲刷、抛光和修剪机.安全要求

This standard applies to the following machines which are intended to work material for the manufacture of footwear: Automatic and manual roughing, scouring and polishing machines; Automatic and manual edge contour trimming machines. This standard does not apply to modular shoe repair machines. This standard specifies safety requirements for design, construction and operation. It takes account of intended use, foreseeable misuse, component and system failure. This standard covers all hazards relevant to the footwear, leather and imitation leather goods manufacturing industries. The use of machines within the scope of this standard in different industries may give rise to hazards which were not taken into account at the time of its preparation. This document is not applicable to roughing, scouring, polishing and trimming machines which are manufactured before the date of its publication as EN.

Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements

EN 12387:2005+A1:2009 鞋类、皮革和仿皮革制品制造机.模块化的鞋修理设备.安全要求

This document applies to the following machines including their additional equipment intended for the repair of footwear, leather and imitation leather goods as well as for the manufacture and repair of orthopaedic shoes hereafter called "Shoe Repair Machines": a) Polishing machines; b) Trimming machines; c) Scouring machines; d) Finishing machines; e) Orthopaedic finishing machines; f) Heel and sole press; g) Activating unit - Adhesive; h) Orthopaedic vacuum moulding press; i) Orthopaedic presses; j) Extraction equipment; k) Powered ranging device; l) Edge inking or staining machines; m) Mechanism for stationary nailing and stapling tools. These machines can be standing alone or combined in a modular system for shoe repairs or the production of orthopaedic shoes including the lasts. This document does not apply to: a) Sewing machines b) Autosoling machines c) Sole stitching machines d) Hand operated pneumatic nail drivers or staple tackers. This document specifies safety requirements for construction, transport, installation, setting, adjustment, programming or converting, operating, cleaning, maintenance for the machines listed in 1.1. This document deals with all significant hazards, hazard situations and events relevant to shoe repair machines when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). The document does not deal with hazards due to use of the machines different from the use defined in 1.1. This document assumes the machines are: operated by adequately trained persons used with adequate workplace lighting (see EN 12464-1). This document is not applicable to shoe repair machines which are manufactured before the date of its publication as EN.

Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements

EN 12203:2003+A1:2009 鞋类、皮革和仿皮革制品制造机.鞋和皮革按压机.安全要求

This European Standard is applicable to shoe and leather presses (see 3.1) used in the manufacture of footwear, leather and imitation leather goods and other related components. These machines are: Sole attaching presses (open and closed types); Sole and insole moulding machines; Back part moulding machines; Backer, lining and toe puff attaching presses; Ironing presses; Marking, stamping, labelling and embossing machines; Stitch marking machines; Upper preforming machines; Automatic shoe and leather presses; a) Premoulding machines for thermoplastic counters and counter forming machines; b) Integrated manufacturing systems; c) Presses with mobile stations and rotary configuration; Folding presses; Activating presses; Relasting and last slipping machines; Top piece attaching presses; Leather button covering machines. This European Standard is not applicable to: Cutting and punching machines NOTE see EN 12044; Eyelet, hook and decorative nail attaching machines; Presses used for shoe repair and orthopaedic works NOTE see EN 12387. This European Standard specifies safety requirements for construction, transport, installation, adjustment, setting, teaching or process change-over, operation, cleaning, maintenance, decommissioning, dismantling and, as far as safety is concerned, disposal for machines mentioned in 1.1. It takes account of intended use, foreseeable misuse, component and system failure. This European Standard covers significant hazards relevant to the footwear, leather and imitation leather goods manufacturing industries. (List of hazards see 4.) This European Standard does not deal with precise technical measures for reducing the risks of fumes and dusts detrimental to health. The use of machines within the scope of this European Standard in industries other than those specified in can give rise to hazard not considered during its preparation. This European Standard is also applicable to additional equipment for material handling and operation which are an integral part of the machine. This European Standard assumes the machines are operated by adequately trained persons; are used with adequate workplace lighting conforming the local regulations or to EN 12464-1. This document is not applicable to shoe and leather presses which are manufactured before the date of its publication as EN.

Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements

EN 931:1997+A2:2009 鞋类制造机器.厚重的机器设备.安全要求

This standard is applicable to lasting machines used in the footwear manufacturing industry, namely: Adhesive fore part lasting machines (see figure 1), Hand operated adhesive side lasting machines (see figure 3 A), Adhesive seat lasting machines (see figure 2), Adhesive seat and side lasting machines (see figure 2), Hand operated tack/staple side lasting machines (see figure 3B), Tack seat lasting machines (see figure 2), Tack seat and side thermocement lasting machines (see figure 2), Tack heel seat and thermocent side lasting machines (see figure 2), Tack heel seat and thermocent + tack side lasting machines (see figure 2). This standard does not apply to lasting machines which process granular thermocement. This standard specifies requirements for safe design, construction and use of the machines. No specific requirements are included for transport, commissioning and decommissioning. It takes account of intended use, foreseeable misuse, component and system failure. This standard covers all hazards relevant to the footwear manufacturing industry. The use of machines within the scope of this standard in different industries may give rise to hazards which were not taken into account at the time of its preparation. This document is not applicable to lasting machines which are manufactured before the date of its publication as EN.

Footwear manufacturing machines - Lasting machines - Safety requirements

SN/T 0452.3-2009 进出口针织服装检验规程 第3部分:针织内衣

SN/T 0452的本部分规定了进出口针织内衣的内在质量和外观质量及抽样、检验条件、检验方法、检验程序和检验结果的判定。 本部分适用于进出口棉及棉与其他纤维混纺、交织的各种针织内衣的检验。其他面料针织内衣可参照执行。 本标准不适用于文胸的检验，也不适用于功能性内衣，如保暖内衣、抗菌除臭内衣、塑身内衣、减肥内衣、降血压内衣等。

Rules for the inspection on import and export knitted garment.Part 3:Knitted underwear

SN/T 2306.1-2009 帽类检验规程 第1部分：安全帽

SN/T 2306 的本部分规定了安全帽的要求 ，抽样、检验 .试验方法和检验结果的判定。 本部分适用于安全由的进出口检验。 本部分不适用于供特殊用途使用而设计制造的头部防护用品，如专供武装部队或维持法律秩序人 员使用而设计的防护头盔，运动或比赛用的运动头盔等。

Headgear Inspection Regulations Part 1: Safety Helmets

NF G83-120*NF EN 12545+A1:2009 鞋类,皮革和人造革产品生产机械.噪声试验规程的一般要求

Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements.

DIN EN 14878 Berichtigung 1:2009 纺织品.儿童睡衣的燃烧性能.规范.技术勘误DIN EN 14878-2007

Textiles - Burning behaviour of children's nightwear - Specification; German version EN 14878:2007, Corrigendum to DIN EN 14878:2007-08; German version EN 14878:2007/AC:2009

EN 12545:2000+A1:2009 鞋类、皮革和仿皮革制品制造机.噪声测试代码.通用要求

This noise test code specifies common requirements necessary to carry out efficiently and under standardised conditions the determination, declaration and verification of the noise emission characteristics of the following leather and imitation leather goods and footwear manufacturing machinery: Cutting and punching machines (EN 12044); Roughing, scouring, polishing and trimming machines (EN 930); Footwear moulding machines (EN 1845); Lasting machines (EN 931); Nailing machines (EN 12653); Modular shoe repair equipment (EN 12387); Shoe and leather presses (EN 12203); Splitting, skiving, cutting, cementing and cement drying machines (EN 13457). Common requirements given in this standard are complemented by specific requirements on noise given in the above mentioned C-type standards. Noise emission characteristics include emission sound pressure levels at workstations and the sound power level. The determination of these quantities is necessary e. g. for: manufacturers to declare the noise emitted; comparing the noise emitted by machines in the family concerned; purposes of noise control at source at the design stage. The use of this noise test code and of the specific requirements on noise given in the relevant C-type standard ensures the reproducibility of the determination of the noise emission characteristics within specified limits determined by the grade of accuracy of the basic noise measurement standards used. Preferred noise measurement standards are those of engineering grade of accuracy (grade 2).

Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements

GOST R 50504-2009 衬衫.一般规范/注:代替GOST R 50504 (1993).

Shirts. General specifications

ASTM D5219-09 服装量度用与人体尺寸相关的标准术语

1.1 This standard is a compilation of terminology related to the body dimensions for necessary apparel sizing. 1.2 For definitions of other textile terms, refer to Terminology D 123. 1.3 The terms are listed in alphabetical order regardless of whether they are horizontal or vertical measurements. The three dimensional Avatars were created by Alvanon Inc. See Figs. 1-18. FIG. 1 Body Measurements FIG. 2 Upper Back Measurements FIG. 3 Body Measurements FIG. 4 Upper Body Meaurements FIG. 5 Upper Body Meaurements FIG. 6 Upper Body Meaurements FIG. 7 Center Front Waist Length FIG. 8 Center Back Waist Length FIG. 9 Upper Body Measurements FIG. 10 Back Measurements FIG. 11 Upper Body Measurements FIG. 12 Cervicale to Wrist Length FIG. 13 Upper Body Measurements FIG. 14 Arm Length (Bent Arm) FIG. 15 Crotch Length (Total) FIG. 16 Hand Width/ Hand Length FIG. 17 Hand Girth FIG. 18 Foot Length/Width

Standard Terminology Relating to Body Dimensions for Apparel Sizing

ASTM D6193-09 针角和缝合的标准实施规程

Seam engineering, the determination of the best stitch type, seam configuration, and thread type which should be used for a particular assembly, requires a thorough knowledge of many variables. The improper selection of any one component can result in failure of the sewn junction, and ultimately failure of the product manufactured. General Characteristics8212;The characteristics of a properly constructed sewn seam are strength, elasticity, durability, security, and appearance. These characteristics must be balanced with the properties of the material to be joined to form the optimum sewn seam. The end use of the item will govern the relative importance of these characteristics. The selection of the seam type and stitch type should be based upon these considerations. Strength8212;The seam efficiency of the sewn seam should be as high as possible. This will produce sewn seam strength with a balanced construction that will withstand the forces encountered in the use of the sewn item. The elements affecting the strength of a sewn seam are: Fabric type and strength, Seam type, Stitch type, Stitch density (spi), Thread tension, and Thread strength. Elasticity8212;The elasticity of a sewn seam should be slightly greater than that of the material which it joins. This will enable the material to support its share of the forces encountered for the intended end use of the sewn item. The elasticity of a sewn seam depends upon: Fabric type and strength, Seam type, Stitch type, Stitch density (spi), Thread tension, and Thread elasticity. Durability8212;The durability of a sewn seam depends largely upon its strength relative to the elasticity of the seam and the elasticity of the material. However, in less elastic, tightly woven or dense materials, there is a tendency for the plies to “work” or slide on each other. To form a durable sewn seam in these types of fabrics, the thread size must be carefully chosen. The stitch density also needs to be carefully determined for the material so as not to cause excess tension which will unbalance the elasticity and cause puckering. It is also important to minimize abrasion and wear by contact with outside agencies to promote durability. Security8212;The security of a sewn seam depends chiefly upon the stitch type, spi, and its susceptibility to become unraveled. The stitch must be well set to the material to prevent snagging that can cause rupture of the thread and unraveling of certain stitch types. Appearance8212;The appearance of a sewn seam generally is governed by the proper relationship between the size and type of thread, the stitch density, and the texture and weight of the fabric. In addition to these general characteristics, the technique and skill of the sewing machine operators also govern the appearance of the sewn seams. Some of the factors which will adversely affect the appearance are shown in Table 1. TABLE 1 Stitch and Seam Defects Stitch DefectsSeam Assemblynbsp;nbsp;nbsp;Defects Loose stitchesPuckers

Standard Practice for Stitches and Seams

SN/T 0452.2-2008 进出口针织服装检验规程 第2部分:针织外衣

SN/T 0452的本部分规定了进出口针织外衣的内在质量、外观质量及抽样、检验条件、检验方法、检验程序和检验结果的判定。 本部分适用于各种纺织材料制的进出口针织外衣的检验。

Rules for the inspection on import and export knitted garment.Part 2:Knitted garments

EN ISO/TR 20573:2008 鞋类.鞋类组件的性能要求.鞋跟和前片

Footwear - Performance requirements for components for footwear - Heels and top pieces

SN/T 1932.5-2008 进出口服装检验规程.第5部分:西服、大衣

SN/T 1932的本部分规定了进出口西服大衣的外观质量、内在质量以及抽样、检验条件、检验方法、检验程序和检验结果的判定。 本部分适用于各种纺织材料制的进出口西服大衣的检验。

Rules for inspection on import and export garment.Part 5:Suits and coats

SN/T 1932.2-2008 进出口服装检验规程.第2部分:抽样

SN/T 1932的本部分规定了进出口服装外观及内在质量检验抽样方案、抽样方法、判定和转移规则等技术特征。 本部分适用于进出口服装外观及内在质量的检验抽样。

Rules for inspection on import and export garments.Part 2: Sampling