Y81 家具制品 标准查询与下载

CKS 181-2009 药物/毒药橱柜

Covers the material, dimensional and constructional requirements for four types of drug/poison cabinets intended for use in hospitals and in other medical institutions.

Drug/poison cabinets

DIN EN 12521:2009 家具.强度,耐用性和安全性.家用桌子的要求.德文版本EN 12521-2009

This European standard specifies the minimum requirements for the safety, strength and durability of all types of domestic tables for use by adults, including those with glass in their construction. It does not apply to office tables or desks, tables for non-domestic use, tables for educational institutions and outdoor tables for which EN standards exist. It does not apply to tables where the tabletop is not fixed to the understructure, i.e. when applying test 3, Table 2, the top becomes detached from the understructure. With the exception of stability tests, the standard does not provide assessment of the suitability of any storage features included in domestic tables. It does not include requirements for the durability of castors and height adjustment mechanisms. It does not include requirements for electrical safety. It does not include requirements for the resistance to ageing and degradation. Annex A contains test methods for the deflection of tabletops.

Furniture - Strength, durability and safety - Requirements for domestic tables; German version EN 12521:2009

CAS 179-2009 抗菌防螨床垫

本标准规定了抗菌防螨床垫的定义和代号、产品分类、要求、试验方法、检验规则、检验结果评定和标志、包装、运输、贮存。 本标准适用于家庭、宾馆、医院等场合使用的采用抗菌或防螨面料的活性炭椰棕(棕丝)床垫。弹簧床垫、以及其他组合床垫可参照本标准。

Antibacterial anti-mite palm fiber mattress

CKS 617-2009 医用脚凳

Covers the requirements for single-step and double-step footstools suitable for use in hospital and health care institutions.

Footstools for hospital use

SANS 521:2009 医院用床和婴儿床

Covers dimensional and constructional requirements for six types of basic beds and cots intended for use in hospitals and in other medical institutions.

Hospital beds and cots

KS G 5757-1-2009 家庭用婴儿围栏.第1部分:安全要求事项

이 표준은 몸무게 15 kg 이하의 어린이를 위한 가정용 놀이 울타리 및 접이식 놀이 울타

Playpens for domestic use-Part 1:Safety requirements

KS G 5757-2-2009 家庭用婴儿围栏.第2部分:试验方法

이 표준에서는 오용의 가능성 뿐만 아니라 일반적인 사용을 가상하여 제품의 여러 부분에 하중

Playpens for domestic use-Part 2:Test methods

KS G 4007-2009 家具性能试验方法通则

이 표준은 한국산업표준에 규정하는 가구의 성능 시험의 일반사항에 대하여 규정한다.

Furniture－General rule for test method

SANS 10226:2009 微生物安全橱柜的安装、装配后测试和维护

Covers the installation, post-installation tests and maintenance of microbiological safety cabinets that comply with the relevant requirements for class I, II or III of the compulsory specification for microbiological safety cabinets (class I, II and III

The installation, post-installation tests and maintenance of microbiological safety cabinets

CKS 242-2009 活动茶几

Covers the material, dimensional, and constructional requirements for tea trolleys intended for use in hospitals.

Tea trolleys

DIN EN 1335-3:2009 办公家具.办公椅.第3部分:安全试验方法.英文版本DIN EN 1335-3-2009-08

This European Standard specifies mechanical test methods for determining the stability, strength and durability of office work chairs. This European Standard does not specify type approval tests for chair components. The tests are designed to be applied to an article of furniture that is fully assembled and ready for use. The tests consist of the application, to various parts of the item, of forces simulating normal functional use, as well as misuse that might reasonably be expected to occur. The tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes. The test results are only valid for the article tested. When the test results are intended to be applied to other similar articles, it is important that the test specimen be representative of the production model. Tests carried out according to this standard are intended to demonstrate the ability of the item to give satisfactory service in its intended environment. The safety requirements are specified in EN 1335-2 and additional loads, masses and cycles for functional tests can be found in Annex C (informative). The tests have been developed for units/components that have not been in use. However, when properly justified, they may be used for fault investigation. Assessment of ageing and degradation is not included. The tests are not intended to assess the durability of upholstery, i.e. filling materials and covers. Data are given for the design of seat-loading pads in Annex A (normative) and for the design of stability- loading pad in Annex B (normative).

Office furniture - Office work chair - Part 3: Test methods; English version of DIN EN 1335-3:2009-08

DIN EN 581-2:2009 户外家具.野营,家用和订做的座椅和桌子.第2部分:接卸安全要求座椅测试方法.英文版本DIN EN 581-2-2009-08

This part of EN 581 specifies the mechanical safety requirements and test methods of outdoor seating for camping, domestic and contract use for adults, without regard to materials, design/construction or manufacturing processes. This document does not apply to outdoor furniture for severe contract use, where higher requirements may be necessary nor to removable upholstery and coverings, permanently fixed furniture and street furniture. The test requirements contained within this European Standard are based on use by persons weighing up to 110 kg. Information regarding ageing and degradation caused by light, temperature and moisture has not been included. Annex A (normative) specifies additional test methods for seating with multi-position back rests. Annex B (normative) specifies test methods for loungers. Annex C (informative) specifies guidelines for purchase information.

Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 2: Mechanical safety requirements and test methods for seating; English version of DIN EN 581-2:2009-08

KS G 4205-2009 办公椅小角轮

이 표준은 사무 의자용 캐스터(이하 캐스터라 한다.)에 대하여 규정한다. 다만 스토퍼를 부

Casters for office chairs

DB54/T 0031-2009

本标准规定了藏式家具的术语和定义、要求、试验方法、检验程序、检验规则、标志、使用说明、包装、运输和贮存等。 本标准适用于藏民族地区藏民使用的藏式床、藏式组合柜、藏式茶几等家具。其他藏式家具可参照执行。

CKS 237-2009 带架的摇篮(婴儿车)

Covers the material, dimensional, and constructional requirements for bassinets mounted on mobile stands and intended for use in hospitals and other medical institutions.

Bassinets (cribs) with stands

DIN EN 12722:2009 家具.表面干热耐受性的评价.DIN EN 12722:2009-07的英文版本

This European Standard specifies a method for the assessment of the resistance to dry heat of all rigid furniture surfaces regardless of materials. It does not apply to leather and textile surfaces. The test is intended to be carried out on a part of the finished furniture, but can be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test. The test should be carried out on unused surfaces. Annex A (informative) describes a direct light source.

Furniture - Assessment of surface resistance to dry heat; English version of DIN EN 12722:2009-07

BS EN 581-2:2009 户外家具.野营,家用和商业用桌椅.第2部分:座椅的机械安全性要求和座椅试验方法

This part of EN 581 specifies the mechanical safety requirements and test methods of outdoor seating for camping, domestic and contract use for adults, without regard to materials, design/construction or manufacturing processes. This document does not apply to outdoor furniture for severe contract use, where higher requirements may be necessary nor to removable upholstery and coverings, permanently fixed furniture and street furniture. The test requirements contained within this European Standard are based on use by persons weighing up to 110 kg. Information regarding ageing and degradation caused by light, temperature and moisture has not been included. Annex A (normative) specifies additional test methods for seating with multi-position back rests. Annex B (normative) specifies test methods for loungers. Annex C (informative) specifies guidelines for purchase information.

Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 2:Mechanical safety requirements and test methods for seating

CKS 447-2009 上下铺

Covers the requirements for high-low beds intended for use in hospitals.

High-low beds

NF D61-040-2:2009 办公器具的办公椅.第2部分:安全要求

Office furniture - Office work chair - Part 2 : safety requirements.

BS EN 1335-2:2009 办公家具.办公室工作椅.第2部分:安全要求

This part of EN 1335 specifies the mechanical safety requirements for office work chairs. The requirements are based upon use for 8 h a day by persons weighing up to 110 kg. For more severe conditions of use, increased requirements will be necessary. Annex A (normative) includes loads, masses and cycles for safety tests. Additional loads, masses and cycles for functional tests can be found in EN 1335-3:2009, Annex C.

Office furniture — Office work chair Part 2: Safety requirements