Y81 家具制品 标准查询与下载

SANS 1005:2009 弹簧床垫

Covers the dimensional and constructional requirements for innerspring mattresses of two classes, class 1 being intended for institutional use and class 2 for domestic use.

Innerspring mattresses

SANS 1528-3:2009 家具.第3部分:储存装置

Specifies the characteristics of storage units for use in domestic and office situations. Covers such items as sheet steel furniture, kitchen units, shelving, credenzas and chests of drawers. Does not cover such items as industrial racking and shelving.

Furniture Part 3: Storage units

SANS 1389:2009 桌子

Covers the requirements for materials, construction, finish and performance of dining-room tables, kitchen/messroom tables and occasional tables for use indoors.

Tables

ASTM F2388-09 家用婴儿更换桌安全规范

1.1 This consumer safety specification covers performance requirements, test methods, and labeling requirements to promote the safe use of baby changing tables and other changing surfaces such as contoured changing pads and add-on changing units that are sold separately for use on furniture products other than changing tables. 1.2 This specification covers products sold for domestic use for children up to a weight of 30 lb (13.6 kg). 1.3 Changing tables and other changing products sold separately, such as contoured changing pads and add-on changing units shall meet all applicable performance and labeling requirements. 1.4 No changing table, contoured changing pad, or add-on changing unit produced after the approval date of this specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all applicable requirements contained herein, before, and after all testing. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 The following precautionary caveat pertains only to the test method portion in Section 7 of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Consumer Safety Specification for Baby Changing Tables for Domestic Use

ASTM F1821-09 婴儿床的标准消费者安全规范

1.1 This consumer safety specification covers requirements for the design and performance of toddler beds. It also contains requirements for labeling and instructional material. 1.2 This consumer safety specification is intended to minimize incidents to children resulting from normal use and reasonably foreseeable misuse of toddler beds. It does not address incidents resulting from alteration or unreasonable misuse. 1.3 For the purposes of this consumer safety specification, a toddler bed is a bed that is sized to accept a full-size crib mattress and is intended for use by a child not less than 15 months of age and who weighs no more than 50 lb (27.7 kg). 1.4 No toddler bed produced after the approval date of this consumer safety specification shall indicate compliance with this specification, either by label or by other means, unless it conforms to all the requirements contained herein. 1.5 This consumer safety specification includes the following sections: ScopeSection 1 Referenced DocumentsSection 2 TerminologySection 3 Calibration and StandardizationSection 4 General RequirementsSection 5 Performance RequirementSection 6 Test MethodsSection 7 Marking and Labeling Section 8 Instructional LiteratureSection 9 KeywordsSection 10 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 The following safety hazards caveat pertains only to the test methods portion, Section 7, of this consumer safety specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Consumer Safety Specification for Toddler Beds

ASTM F2613-09 儿童折叠椅安规

1.1 This consumer safety specification establishes testing requirements for structural integrity and performance requirements for children’s folding chairs. It also provides requirements for labeling. The term unit or product will refer to a child’s folding chair. 1.2 This specification covers a folding chair intended to be used by a child with a seat height 15 in. or less. 1.3 No product produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all applicable requirements contained herein, before and after all testing. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Consumer Safety Specification for Children's Folding Chairs

ASTM F2598-09 服装储存柜的消费者安全规范标准

1.1 This consumer safety specification covers the performance requirements and test methods to ensure the safety of chests. 1.2 This consumer safety specification is intended to minimize the incidents and injuries to children resulting from normal use and reasonably foreseeable misuse or abuse of these chests. 1.3 This consumer safety specification applies to products known as clothes chests or other single-compartment closed rigid boxes (sometimes referred to as “cedar chests”) that are designed and marketed as storage containers for clothes, blankets, or linens. The products subject to the requirements are those with a single volume of 1.1 ft3 (0.031 m3) or more. 1.4 No chest produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 The following precautionary caveat pertains only to the test methods portion, Section 5, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Consumer Safety Specification for Clothing Storage Chests

ASTM F2050-09 手提式婴儿床的消费者安全性能标准规范

1.1 This consumer safety specification establishes performance requirements, test methods, and marking requirements to promote safe use of a hand-held infant carrier by an occupant and caregiver. 1.2 This consumer safety specification is intended to minimize the risk of incidents to an occupant resulting from normal use and reasonably foreseeable misuse or abuse of a hand-held infant carrier. 1.3 No hand-held infant carrier produced after the approval date of this consumer safety specification, either by label or other means, shall indicate compliance with this specification, unless it conforms to all requirements contained herein. 1.4 This consumer safety specification is not intended to address accidents and injuries resulting from the interaction of other persons with the child occupant in a hand-held infant carrier or the accidents resulting from abuse and misuse by children able to walk. 1.5 This consumer safety specification is not intended to address incidents or injuries resulting from use of the product in a motor vehicle, nor is it intended to address any issues that may arise from the manufacturer meeting the certification requirements of FMVSS-213 or other applicable add-on child restraint standards. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 The following precautionary caveat pertains only to the test method portion, Section 7, of this consumer safety specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Consumer Safety Performance Specification for Hand-Held Infant Carriers

BS EN 747-1:2007 家具.家用双层床和高床.安全、强度和耐久性要求

This European Standard specifies requirements for the safety, strength and durability of bunk beds and high beds for domestic use. The loads and forces in the strength and durability tests apply to beds with a maximum bed base width of 120 cm. It is particularly intended to minimise the risk of accidents happening to children. If the bunk bed/high bed includes other products, for example a table or storage furniture, the safety requirements for these products are not covered by this standard.

Furniture - Bunk beds and high beds for domestic use - Part 1: Safety, strength and durability requirements

BS EN 747-2:2007 家具.家用双层床和高床.试验方法

This part of EN 747 specifies test methods for assessing the safety, strength and durability of bunk beds and high beds for domestic use. The loads and forces in the strength and durability tests apply for beds with a maximum bed base width of 120 cm. It is particularly intended to minimise the risk of accidents happening to children. Only the sleeping function is considered. The tests are designed to be applied to a free-standing bed that is fully assembled and ready for use. The test results are only valid for the article tested. When the test results are to be applied to other similar articles, the test sample shall be representative of the production model.

Furniture - Bunk beds and high beds for domestic use - Part 2: Test methods

SANS 1528-6:2008 家具.第6部分:家用儿童椅

Specifies the characters of children's high chairs for domestic use. Covers high chairs that are also intended to convert to low chairs with separate or attached tables. Does not cover high chairs that convert to push chairs, walking frames, car chairs o

Furniture Part 6: High chairs for domestic use

SANS 1528-2:2008 家具.第2部分:桌子、办公桌和电脑桌

Specifies the characteristics of desks, tables and computer stands. Includes workstation furniture and covers items that are freestanding and items that are integrated into office partitions.

Furniture Part 2: Desks, tables and computer stands

SANS 1528-1:2008 家具.第1部分:放置

Specifies the characteristics of seating. Covers the stability, strength and durability of seating other than school and outdoor seating. Covers ergonomic features of seating intended for use at a workstation, desk or table. Includes requirements for the

Furniture Part 1: Seating

SANS 1528-4:2008 家具.第4部分:家用双层床

Specifies the characteristics of bunk beds for domestic use. Covers bunk beds that can be converted to single beds and bunk beds that consist of a single elevated bed above, for example, a storage area. Does not cover mattresses.

Furniture Part 4: Bunk beds for domestic use

SANS 1528-7:2008 家具.第7部分:家用儿童床

Specifies the characteristics of children's cots for domestic use. Covers cots that are intended to prevent children from climbing out. Does not cover rocking, swinging or folding cots, nor does it cover cot mattresses.

Furniture Part 7: Children's cots for domestic use

BS EN 716-1:2008+A1:2013 家具. 家用儿童床和折叠床. 安全要求

Furniture - Children's cots and folding cots for domestic use - Safety requirements

NF D62-072:2008 家具.强度、耐久性和安全.非家用桌子的要求

Furniture - Strenght, durability and safety - Requirements for non-domestic tables.

KS G 4203-2008 办公用铁桌

이 규격은 사무용 책상 및 테이블(이하, 책상 및 테이블이라 한다.)에 대하여 규정한다.

Office furniture-Desks and tables

DIN EN 15372:2008 家具.强度、耐久性和安全性.非家用桌子的要求

This European Standard specifies requirements for the safety, strength and durability of all types of non- domestic tables including those with glass in their construction. It does not apply to office tables or desks, tables for educational institutions and outdoor tables for which EN standards or drafts exist. With exception of the stability tests, this standard does not provide assessment of the suitability of any storage features included in non-domestic tables. It does not include requirements for the durability of castors and height adjustment mechanisms. It does not include requirements for electrical safety. It does not include requirements for the resistance to ageing, degradation.

Furniture - Strength, durability and safety - Requirements for non-domestic tables; German version EN 15372:2008

JIS S 1103:2008 木制婴儿床

この規格は，主として一般家庭において，出生後24か月以内の季L幼児の睡眠又は保育に使用すろ木製べビーペッド(以下，べッドという。)について規定する。

Wooden baby beds