Y81 家具制品 标准查询与下载

CAS 155-2008 活性炭椰棕(棕丝)床垫

本标准规定了活性炭椰棕(棕丝)床垫的定义和代号、产品分类、要求、试验方法、检验规则、检验结果评定和标志、包装、运输及贮存。 本标准适用于宾馆、家庭等场合使用的活性炭椰棕(棕丝)床垫。

Palm Fiber Mattress with Active Carbon

NF S54-002-2:2008 家具.家用儿童帆布床和折叠床.第2部分:试验方法

Furniture - Children's cots and folding cots for domestic use - Part 2 : test methods.

QB/T 2385-2008 深色名贵硬木家具

本标准规定了深色名贵硬木家具的术语和定义、命名和分类、要求、试验方法、检验规则和标志、使用说明、包装、贮存、运输。 本标准适用于深色名贵硬木家具（含红木家具）产品。

Valuable hardwood furniture in deep color

EN 716-2:2008 家具.家用儿童床和折叠床.第2部分:试验方法

This part of EN 716 specifies test methods for assessing the safety of children's cots and folding cots for domestic use. It applies to children’s cots and folding cots with an internal length greater than 900 mm but not more than 1 400 mm.

Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods

EN 716-1:2008 家具.家用儿童床和折叠床.第1部分:安全性要求

This part of EN 716 specifies safety requirements for children's cots for domestic use with an internal length greater than 900 mm but not more than 1 400 mm. The requirements apply to a cot that is fully assembled and ready for use. Cots that can be converted into other items e.g. changing units, playpens should, when converted, comply with the relevant European standard for that item. This standard does not apply to carry cots, cribs and cradles for which a separate European standard exists.

Furniture - Children's cots and folding cots for domestic use - Part 1: Safety requirements

BS 7177:2008 垫子、沙发床和床垫的抗燃性规范

This British Standard specifies requirements for the resistance to ignition of mattresses, mattress pads, divans and bed bases when tested in accordance with BS EN 597-1, BS EN 597-2 and BS 6807 including those used in areas vulnerable to arson. It does not apply to mattress protectors. The levels of ignition resistance have been set after careful consideration of the fire risk of the particular end-use environment involved. These levels do not necessarily reflect the behaviour of the mattress, mattress pad, divan or bed base in a fully developed fire. NOTE Guidance on the applicability of hazard categories to particular premises is given in the notes to Table 1.

Specification for resistance to ignition of mattresses, mattress pads, divans and bed bases

ANSI/BIFMA/SOHO S6.5-2008 小型办公室/家庭办公家具

This standard is intended to provide a common basis of mechanical tests for evaluating the safety, durability, and structural adequacy of storage and desk-type furniture intended for use in the small office and/or home office. The styling, marketing and chain of distribution for these products are intended to address usage in a residential, home office or small office environment. These products may be completely assembled, partly assembled or totally unassembled (often known as RTA or 'ready to assemble'), when they leave the control of the manufacturer. These partly assembled and RTA products are designed to be assembled by the end user.

Small Office/Home Office Furniture

ASTM F2710-08 商业婴儿床的标准消费者安全性能规范

1.1 nbsp;nbsp;nbsp;This consumer safety performance specification establishes performance requirements, test methods, and marking requirements to promote the safe use of cribs in commercial environments such as hotels, rentals, motels, day care centers and the like. 1.2 nbsp;nbsp;nbsp;This consumer safety performance specification subsumes the federal and ASTM standards which are in existence for these types of product when those products are used in non-commercial applications. 1.3 nbsp;nbsp;nbsp;This consumer safety performance specification includes products intended to provide a safe sleeping environment such as full size cribs, non full size cribs, and playards and includes both rigid and mesh sided units. The term “crib” as used in this standard includes all of these items. 1.4 nbsp;nbsp;nbsp;Products such as bassinets and cradles are specifically excluded from this consumer safety performance specification. 1.5 nbsp;nbsp;nbsp;No commercial crib produced after the approval date of this consumer safety performance specification shall, either by label or other means indicate compliance with this specification unless it conforms to all applicable requirements contained herein, before and after all testing. 1.6 nbsp;nbsp;nbsp;The following precautionary caveat pertains only to the test method portions of this consumer and other referenced safety specifications. The standard(s) may involve the use of hazardous materials, operations and equipment. The standard(s) does not purport to address all of the safety concerns, if any associated with its use. It is the responsibility of the user of this standard to establish all appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use. 1.7 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Consumer Safety Performance Specification for Commercial Cribs

QB/T 2913.2-2007 板式家具成品名词术语第2部分:桌（台）类家具成品名词术语

本部分规定了桌（台）类家具成品的产品命名、术语和定义。 本部分适用于非嵌入式板式桌（台）家具成品。

Terminology of Finished Products of Panel Furniture.Part 2:Terms of Tables

QB/T 2913.3-2007 板式家具成品名词术语第3部分:床类家具成品名词术语

本部分规定了床类家具成品的产品命名、术语和定义。 本部分适用于非嵌入式板式床类家具成品。

Terminology of Finished Products of Panel Furniture.Part 3:Terms of Beds

QB/T 2913.1-2007 板式家具成品名词术语第1部分:柜架类家具成品名词术语

本部分规定了柜架类家具成品的产品命名、术语和定义。 本部分适用于非嵌入式板式柜架类家具成品。

Terminology of Finished Products of Panel Furniture.Part 1:Terms of Cabinets and Racks

QB/T 2280-2007 办公椅

本标准规定了办公椅的术语和定义、分类、要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于办公室、会议室等场合使用的工作用椅。其他场合的类似用途椅子也可参照执行。

Office Chair

DIN EN 747-1:2007 家具.家用双层床和高床.第1部分:安全、强度和耐久性要求

This European Standard specifies requirements for the safety, strength and durability of bunk beds and high beds for domestic use. The loads and forces in the strength and durability tests apply to beds with a maximum bed base width of 120 cm. It is particularly intended to minimise the risk of accidents happening to children. If the bunk bed/high bed includes other products, for example a table or storage furniture, the safety requirements for these products are not covered by this standard.

Furniture - Bunk beds and high beds for domestic use - Part 1: Safety, strength and durability requirements; English version of DIN EN 747-1:2007-07

DIN EN 581-3:2007 室外家具.野营区、居住区和商业区用坐椅和桌.第3部分:桌子的机械安全要求和试验方法

This European Standard specifies the mechanical safety requirements and test methods for outdoor tables used by adults for camping, domestic and contract use without regard to materials, design/construction or manufacturing processes, This document does not apply to outdoor furniture for severe contract use where higher requirements may be necessary, nor does it apply to street furniture and furniture permanently fixed to the ground/wall. Annex A (informative) specifies guidelines for purchase information. Information regarding ageing and degradation caused by light, temperature and moisture has not been included.

Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 3: Mechanical safety requirements and test methods for tables; English version of DIN EN 581-3:2007-07

ISO 21016:2007 办公家具.桌子和写字台.稳定性、强度和耐久性测定的试验方法

This International Standard specifies test methods for the determination of the stability, the strength and the durability of all types of office tables designed for use in the seated and/or standing position, e.g. work tables, height-adjustable tables, meeting tables and desks. It applies to tables that are fully assembled and ready for use. This International Standard does not contain test methods for storage elements, which can be found in ISO 7170. The tests consist of the application, to various parts of the unit, of loads, forces and velocities simulating normal functional use, as well as misuse, that can reasonably be expected to occur. With the exception of the deflection of table tops, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes. The test results are valid only for the unit/component tested. These results can be used to represent the performance of production models provided that the tested model is representative of the production model. Tests carried out according to this International Standard are intended to demonstrate the ability of the item to give satisfactory service in its intended environment. It is necessary to understand that such tests do not ensure that structural failure will not eventually occur as a result of habitual misuse or after an excessively long period of service. The tests have been developed for units/components that have not been in use. However, when properly justified, they can be used for fault investigation. This International Standard specifies test methods only. It does not specify requirements. These should be specified in a requirements document. If this is not available, suggested forces and cycles can be found in Annex A. Assessment of ageing and degradation is not included.

Office furniture - Tables and desks - Test methods for the determination of stability, strength and durability

DIN EN 747-2:2007 家具.家用双层床和高床.第2部分:试验方法

This part of EN 747 specifies test methods for assessing the safety, strength and durability of bunk beds and high beds for domestic use. The loads and forces in the strength and durability tests apply for beds with a maximum bed base width of 120 cm. It is particularly intended to minimise the risk of accidents happening to children. Only the sleeping function is considered. The tests are designed to be applied to a free-standing bed that is fully assembled and ready for use. The test results are only valid for the article tested. When the test results are to be applied to other similar articles, the test sample shall be representative of the production model.

Furniture - Bunk beds and high beds for domestic use - Part 2: Test methods; English version of DIN EN 747-2:2007-07

DB31/ 181-2007 红木家具产品标识规定

Mahogany furniture product labeling regulations

ISO 21015:2007 办公家具.办公椅子.测定稳定性、强度和耐久性的试验方法

This International Standard specifies test methods for determining the stability, strength and durability of office work chairs. Guidance is given on the choice of forces, cycles, etc., for these tests. The tests are designed to be applied to an article of furniture that is fully assembled and ready for use. The dimensions in the tests are applicable to office work chairs intended for adult persons. The tests consist of the application, to various parts of the item, of forces simulating normal functional use, as well as misuse that can reasonably be expected to occur. The tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes. The test results are valid only for the article tested. When the test results are intended to be applied to other similar articles, it is important that the test specimen be representative of the production model. Tests carried out according to this International Standard are intended to demonstrate the ability of the item to give satisfactory service in its intended environment. The tests have been developed for units/components that have not been in use. However, when properly justified, they can be used for fault investigation. Data are given for the design of seat-loading pads (Annex B) and for the design of stability-loading pad (Annex C). This International Standard does not give any product requirements. These can be specified in a requirements document. If this is not available, possible forces and cycles are suggested in Annex A (informative). These forces and cycles can be used for adults regardless of their weight and number of working hours. This International Standard does not specify type approval tests for chair components. Assessment of ageing and degradation is not included. The tests are not intended to assess the durability of upholstery, i.e. filling materials and covers.

Office furniture - Office work chairs - Test methods for the determination of stability, strength and durability

DIN EN 1116 Berichtigung 1:2007 厨房家具.厨房家具和厨房用具的协调尺寸.DIN EN 1116-2004 技术勘误

Kitchen furniture - Co-ordinating sizes for kitchen furniture and kitchen appliances; German version EN 1116:2004, Corrigenda to DIN EN 1116:2004-09

DIN ISO 7170:2007 家具.储物柜.强度和耐久性的测定

This International Standard specifies test methods for determining the strength and durability of storage units that are fully assembled and ready for use, including their movable and non-movable parts. The tests consist of the application, to various parts of the unit, of loads, forces and velocities simulating normal functional use, as well as misuse, that might reasonably be expected to occur. With the exception of the sustained load tests in Clause 6, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes. The test results are only valid for the unit/component tested. These results may be used to represent the performance of production models provided that the tested model is representative of the production model. Tests carried out according to this International Standard are intended to demonstrate the ability of the item to give satisfactory service in its intended environment. The tests have been developed for units/components that have not been in use. However, when properly justified, they may be used for fault investigation. The strength and durability tests do not assess the structure of the building, e.g. the strength of wall hanging cabinets includes only the cabinet and the parts used for the attachment. The wall and the attachment into the wall are not included. Assessment of ageing and degradation is not included. This International Standard specifies test methods only. It does not specify requirements. These should be specified in a requirements document. If this is not available, suggested loads and cycles can be found in Annex A. Annex B describes two apparatuses used for slam-shut and slam-open tests of extension elements.

Furniture - Storage units - Determination of strength and durability (ISO 7170:2005) English version of DIN ISO 7170:2007-02