Y81 家具制品 标准查询与下载

ASTM F1967-07a 幼儿浴室椅用消费者安全标准规范

1.1 This consumer safety specification establishes performance requirements, test methods, and labeling requirements to promote the safe use of infant bath seats. Products commonly referred to as bath rings also are included in the scope of this specification. Traditional infant bath tubs that are used to bathe an infant are not within the scope of this standard.1.2 This consumer safety specification is intended to reduce the risk of death and minimize injury to infants resulting from use and reasonably foreseeable abuse of infant bath seats.1.3 No infant bath seat produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein.1.4 The test values and dimensions stated in inch-pound units are to be regarded as standard. SI values in parentheses are given for information only.The following precautionary caveat pertains only to the test methods portion, Section 7, of this consumer safety specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Consumer Safety Specification for Infant Bath Seats

ASTM F2085-07 活动式床围栏的消费者安全标准规范

1.1 This consumer safety specification establishes requirements for the performance of portable bed rails. It also contains requirements for labeling and instructional literature.1.2 This consumer safety specification is intended to minimize hazards to children resulting from normal use and reasonably foreseeable misuse of portable bed rails.1.3 For the purpose of this consumer safety specification, a portable bed rail is a device intended to be installed on an adult bed to prevent children from falling out of bed. These bed rails are intended for children who can get in and out of an adult bed unassisted (typically from 2 to 5 years of age.)1.4 No bed rail as defined in 3.1.2 that is produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all the requirements contained herein.1.5 The values stated in inch-pound units are to be regarded as the standard. The SI values given in parentheses are for information only. The following precautionary caveat pertains only to the test methods portion in Section 7 of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Consumer Safety Specification for Portable Bed Rails

ASTM F404-07 高脚椅的消费者安全标准规范

1.1 This consumer safety specification covers the performance requirements and methods of test to ensure the satisfactory performance of the high chair. 1.2 This consumer safety specification is intended to minimize injuries to children resulting from normal usage and reasonably foreseeable misuse or abuse of high chairs.Note 18212;This consumer safety specification is not intended to address accidents and injuries resulting from the interaction of older children with children in the high chair or the accidents resulting from abuse and misuse by persons over three years of age.1.3 For purposes of this consumer safety specification, a high chair is a free standing chair that elevates a child to standard dining table height. The high chair is made for the purpose of holding a child, up to 3 years of age, who can remain in a sitting position due to the child's own coordination, and normally for the purposes of feeding or eating. A high chair may be height adjustable and include a reclined position for infants not able to remain in a sitting position due to the child's own coordination.1.4 No high chair produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein. 1.5 The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only.1.6 The following precautionary caveat pertains only to the test methods portion, Section 9, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Consumer Safety Specification for High Chairs

ASTM F1967-07 幼儿浴室椅用消费者安全标准规范

1.1 This consumer safety specification establishes performance requirements, test methods, and labeling requirements to promote the safe use of infant bath seats. Products commonly referred to as bath rings also are included in the scope of this specification. Traditional infant bath tubs that are used to bathe an infant are not within the scope of this standard.1.2 This consumer safety specification is intended to reduce the risk of death and minimize injury to infants resulting from use and reasonably foreseeable abuse of infant bath seats.1.3 No infant bath seat produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein.1.4 The test values and dimensions stated in inch-pound units are to be regarded as standard. SI values in parentheses are given for information only.The following precautionary caveat pertains only to the test methods portion, Section 7, of this consumer safety specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Consumer Safety Specification for Infant Bath Seats

KS G 4101-2006 办公椅尺寸

이 규격은 사무용 의자(이하 의자라 한다.)의 치수 및 각 부분의 치수에 대하여 규정한다.

Standard size chairs for office

KS G 4006-2006 木制办公家具着色(喷涂)标准

이 규격은 목제 사무용 가구의 분무 도장 표준에 대하여 규정한다.

Standard painting(spraying) for office wooden furniture

NF D60-603-1:2006 家具.教育机构用桌椅.第1部分:功能尺寸

Furniture - Chairs and tables for educational institutions - Part 1 : functional dimensions.

DIN EN 1729-1:2006 家具.教育机构用桌椅.第1部分:功能尺寸

This part of European Standard of EN 1729 specifies functional dimensions and markings for chairs and tables for general educational purposes in educational institutions. It includes fixed height and adjustable furniture as well as standing work height tables for use without chairs. It applies to furniture for use with laptop computers or portable devices, but not to special purpose workstations, e. g. laboratories, ranked seating and workshops. The standard does not apply to furniture used by teaching personnel.#,,#

Furniture - Chairs and tables for educational institutions - Part 1: Functional dimensions English version of DIN EN 1729-1:2006-09

SANS 1406:2006 商用冷藏食品陈列柜

Specifies requirements for three types and two climate classes of commercial refrigerated display cabinets for the storage of frozen and fresh foods, and liquids in containers that are for sale, and intended for operation on a three-phase 440 V power sup

Commercial refrigerated food display cabinets

BS 8474:2006 家具.带电力驱动支撑表面的椅子.要求

This British Standard specifies requirements and test methods for chairs with support surfaces the position of which can be adjusted electrically by the seated person and/or an attendant, including reclining chairs and riser chairs. It is applicable to chairs for use by people weighing up to 100 kg. The standard is applicable to single and multiple seating units. In the text of this standard the term “chairs” is used to refer to chairs with electrically operated support surfaces. The term “chairs” also refers to multiple seating units. The standard is applicable to chairs intended for domestic and non-domestic use. This standard specifies only the safety, strength and durability of the chair structure. It does not specify the fire resistance or durability properties of filling materials, upholstery fabrics or foam cushions. Also, it does not specify the electrical safety of the support surface adjustment mechanism. The requirements in this standard are applicable to chairs in the fully assembled condition, ready for use. The standard does not specify resistance to degradation of the structural materials by sunlight or chemical attack. This standard does not cover any ancillary devices attached to, or built into, the chair structure, such as a table, refrigerator or television remote control (see Note 2). NOTE 1 Chairs which are medical devices are required to conform to EC Directive 93/42 EEC (the Medical Devices Directive). One means of complying with the Medical Devices Directive is given in BS 8480. NOTE 2 If conformity to a standard is to be claimed for such ancillary devices, conformity assessment against the relevant standard(s) would need to be carried out separately.

Furniture - Chairs with electrically operated support surfaces - Requirements

BS EN 14988-2:2006+A1:2012 儿童用高脚椅子.试验方法

Children's highchairs - Test methods

BS EN 14988-2:2006 儿童用高脚椅子.试验方法

This European Standard specifies test methods for the assessment of the requirements of children’s high chairs.

Children's highchairs - Test methods

BS EN 14988-1:2006 儿童用高脚椅子.安全性要求

This European Standard specifies safety requirements for children’s high chairs intended for children from 6 months to 36 months of age. If the product can be converted into a product for which an EN safety standard exists, the product shall also fulfil the requirements of that standard.

Children's high chairs - Safety requirements

BS EN 14988-1:2006+A1:2012 儿童用高脚椅子.安全性要求

Children's high chairs. Safety requirements

NF S54-007-1:2006 儿童高脚椅子.第1部分:安全要求

Children's high chair - Part 1 : safety requirements.

NF D61-061-1:2006 户外家具.野营、家用和办公用的座椅和桌子.第1部分:一般安全要求

Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 1 : general safety requirements.

NF S54-007-2:2006 儿童高脚椅子.第2部分:实验方法

Children's high chair - Part 2 : test methods.

BS EN 581-1:2006 户外家具.野营、家用和指定用座椅和桌子.通用安全性要求

This European Standard specifies the general safety requirements for outdoor seating and tables for camping, domestic and contract use. It does not apply to removable upholstery, coverings and permanently fixed furniture. Annex A (informative) is a schematic presentation of requirements and conditions concerning shear and squeeze points. Annex B (informative) includes a terminology for outdoor furniture.

Outdoor furniture - Seating and tables for camping, domestic and contract use - General safety requirements

JIS S 1031 ERRATUM 1:2006 勘误

ERRATUM

ASTM F2388-06 家用婴儿可调桌子的消费者标准安全规范

1.1 This consumer safety specification covers performance requirements, test methods, and labeling requirements to promote the safe use of baby changing tables and other changing surfaces such as contoured changing pads and add-on changing units that are sold separately for use on furniture products other than changing tables.1.2 This specification covers products sold for domestic use for children up to a weight of 30 lb (13.6 kg).1.3 Changing tables and other changing products sold separately, such as contoured changing pads and add-on changing units shall meet all applicable performance and labeling requirements.1.4 No changing table, contoured changing pad, or add-on changing unit produced after the approval date of this specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all applicable requirements contained herein, before, and after all testing.The following precautionary caveat pertains only to the test method portion in Section of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Consumer Safety Specification for Baby Changing Tables for Domestic Use