Y81 家具制品 标准查询与下载

QB/T 1952.1-1999 软体家具 沙发

本标准规定了沙发的定义、产品分类、技术要求、试验方法、植验规则及标志、包装、运输和贮存。 本标准适用于供会客、休息等用途的普通沙发，本标准不适用于特殊用途的沙发。

Upholstered Furniture Sofa

BS 7423:1999 床身长度不小于900mm的儿童旅行帆布床安全要求规范

To be read in conjunction with BS EN 716-1:1996, BS EN 716-2:1996

Specification for safety requirements for children's travel cots of internal base length not less than 900 mm

NF D65-001:1999 家具.储物家具.安全要求和试验方法(欧洲标准EN 1727)

Domestic furniture. Storage furniture. Safety requirements and test methods.

JIS S 1033:1999 办公家具.储藏柜

Office furniture -- Storage cabinets

JIS S 1032:1999 办公家具.椅子

Office furniture -- Chairs

JIS S 1031:1999 办公家具.办公桌和写字台

Office furniture -- Desks and tables

ASTM F1988-99(2004)e1 户外用带可调节底座的、有或没有活动臂的塑料躺椅的标准性能要求

1.1 These performance requirements establish nationally recognized performance requirements for Class A (residential) and Class B (nonresidential) plastic chaise lounges, with or without moving arms, with adjustable backs, intended for outdoor use.1.2 The performance requirements are not applicable to upholstered chairs, or other types of furniture.1.3 These performance requirements cover the performance of the product regarding aspects of outdoor weathering, impact, static load for seat and back, and arm testing.1.4 Products may be manufactured from recycled plastics as long as the performance requirements are met.1.5 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Requirements for Plastic Chaise Lounges, With or Without Moving Arms, With Adjustable Backs, for Outdoor Use

ASTM F1169-99 足尺寸的婴儿带栏杆小床

1.1 This consumer safety specification establishes testing requirements for structural integrity of cribs. It also provides requirements for labelling and instructional material. 1.2 The issue of mattress support system is addressed to reduce or eliminate the likelihood of the support system becoming inadvertantly disengaged. 1.3 No crib produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein.

Standard Specification for Full Size Baby Crib

ASTM F1988-99 户外用带可调节底座的、有或没有活动臂的塑料躺椅的标准性能要求

1.1 These performance requirements establish nationally recognized performance requirements for Class A (residential) and Class B (nonresidential) plastic chaise lounges, with or without moving arms, with adjustable backs, intended for outdoor use. 1.2 The performance requirements are not applicable to upholstered chairs, or other types of furniture. 1.3 These performance requirements cover the performance of the product regarding aspects of outdoor weathering, impact, static load for seat and back, and arm testing. 1.4 Products may be manufactured from recycled plastics as long as the performance requirements are met. 1.5 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Requirements for Plastic Chaise Lounges, With or Without Moving Arms, With Adjustable Backs, for Outdoor Use

ASTM F1988-99(2008) 户外用带可调节底座的、有或没有活动臂的塑料躺椅的标准性能要求

Tests and criteria as outlined determine the overall usability and stability of chairs in an environment simulating the conditions of use. Tests simulate two types of surfaces: Smooth surfaces such as linoleum, wet pool decks, etc. The glass testing base (see Fig. 5) is used to simulate this surface. Rough surfaces such as wooden decks, outdoor natural surfaces, etc. The plywood testing base (see Fig. 6) is used to simulate this surface. Note 18212; A = poly(methyl methacrylate) 0.25 ± 0.03 in. (6 ± 0.1 mm) thickness, B = AC exterior glue fir plywood 0.75 ± 0.1 in. (19 ± 2 mm) or greater thickness, C = polypropylene microfoam 0.7± 0.01 lb/ft3 (11 ± 0.2 kg/m3) density and 0.13 ± 0.01 in. (3 ± 0.03 mm) thickness, and D = glass/tempered 0.38 ± 0.04 in. (10 ± 0.1 mm) thickness. Note 28212;A, B,C, and D are sheets roughly 48 in. (1219 mm) on a side or greater to accommodate the length of the chaise lounge. FIG. 5 Glass Testing Base Note 18212; A = poly(methyl methacrylate) 0.25 ± 0.03 in. (6 ± 0.1 mm) thickness, and B = AC exterior glue fir plywood 0.75 ± 0.1 in. (19 ± 2 mm) or greater thickness. Note 28212;A and B are sheets roughly 48 in. (1219 mm) on a side or greater to accommodate the length of the chaise lounge. FIG. 6 Plywood Testing Base1.1 These performance requirements establish nationally recognized performance requirements for Class A (residential) and Class B (nonresidential) plastic chaise lounges, with or without moving arms, with adjustable backs, intended for outdoor use. 1.2 The performance requirements are not applicable to upholstered chairs, or other types of furniture. 1.3 These performance requirements cover the performance of the product regarding aspects of outdoor weathering, impact, static load for seat and back, and arm testing. 1.4 Products may be manufactured from recycled plastics as long as the performance requirements are met. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Requirements for Plastic Chaise Lounges, With or Without Moving Arms, With Adjustable Backs, for Outdoor Use

ASTM F381-99 弹簧床(蹦床)的部件、安装、使用和标签的消费者标准安全规范

1.1 This safety specification covers the components, the assembly, and the use of consumer trampolines.1.2 This specification is delimited in its application to trampolines of (1) a minimum bed size of 3300 in.2 (21 300 cm2), (2) a minimum height of 20 in. (51 cm), (3) intended for the purpose of continuous, vertical jumping activities and (4) intended for consumer use.1.3 This specification is intended to reduce the demonstrated hazards associated with the use of trampolines by consumers. Trampolines primarily used by consumers are in home environments. This specification is not intended to apply to institutional trampolines. Trampolines that adhere to this specification are not recommended for use by children under six years of age.1.4 This standard does not purport to address all of the hazards associated with trampolines. The standard's existence alone will not necessarily prevent injuries. Like other physical activities, trampoline use involves the risk of injury, particularly if the equipment is used improperly.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.1.6 The primary units given in this specification are in the inch-pound system.1.7 This specification includes the following sections and selected subsections.TitleSection NumberScope1Referenced Documents2Terminology3Included Components4Materials and Manufacture5Environmental Conditioning5.2.1UV Exposure5.2.1.1Performance Requirements6Drop Test6.2Drop test weight and impactor shape.6.2.1Drop test procedure.6.2.2Padding Attachment System Strength6.3Padding Attachment System Strength Test Procedure6.3.1Information Packet:7Packet Marketing and Contents7.1Assembly and Installation Instructions7.2Care and Maintenance Instructions7.3Warning Information7.4Use Instructions7.5Product Marking:8Identification8.1On-Trampoline Warnings8.2Instruction Sign8.3Packaging and Package Marking9Access Devices:10Trampoline Ladders10.1Ladder Warning10.2Keywords11Appendix

Standards Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines

DIN EN 1929-1:1998 超市购物车.第1部分:带或者不带儿童座位的超市购物车的要求和试验

The document specifies requirements for the construction, performance, testing and safety specifications for general purpose self sevice basket trolley, fitted or not fitted with a child carrying facility, for use by customers of self service stores to carry goods.

Basket trolleys - Part 1: Requirements and tests for basket trolleys with or without child carrying facility; German version EN 1929-1:1998

JIS S 1062:1998 家用家具.学生座椅

Domestic furniture -- Student chairs

JIS S 1061:1998 家用家具.学生书桌

Domestic furniture -- Student desks

BS EN 1272:1998 儿童保育产品.装有椅子的桌子.安全性要求和试验方法

This European Standard specifies safety requirements and the corresponding test methods for table mounted chairs, intended for children who are able to sit by themselves (approximately 6 months old) and up to 15 kg. This European Standard deals only with safety and does not purport to establish particular designs or special construction methods for the table mounted chairs themselves.

Child care articles - Table mounted chairs - Safety requirements and test methods

JIS S 1202:1998 家具.桌子.稳定性测定

この規格は，建物の構造物に永久的に組み付けたテーブルを除き，自立するあらゆる種類のテーブルの，安定性を求める試験方法について規定する。

Furniture -- Tables -- Determination of stability

JIS S 1203:1998 家具.椅子和凳子.强度和耐用性测定

この規格は，あらゆる種類のいす及びスツールの強度及び耐久性を評価するための試験方法について規定する。

Furniture -- Chairs and stools -- Determination of strength and durability

JIS S 1204:1998 家具.椅子.稳定性测定.第1部分:直立式椅子和凳子

この規格は，あらゆる種類の直立形のいす，スツール及びプーフ(円形のクッションのようなスツール)について，その安定性を求める試験方法を規定する。

Furniture -- Chairs -- Determination of stability -- Part 1: Upright chairs and stools

JIS S 1205:1998 家具.桌子.强度和耐用性测定

この規格は，完全に組み立てられ使用可能な状態にあるテープルの，強度と耐久性を評価するための試験方法について規定する。

Furniture -- Tables -- Determination of strength and durability

QB/T 2384-1998 木制写字桌

标准规定了木制写字桌的产品分类、技术要求、试验方法、检验规则及标志、标签、包装等要求。 标准适用于主要部件由木材或木质人造材料制成的写字桌。

wooden writing desk