Y81 家具制品 标准查询与下载

QB/T 2385-1998 家具 深色名贵硬木家具

本标准规定了深色名贵硬木家具的产品分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于深色名贵硬术家具。本标准不适用于仿深色名贵硬木家具。

Furniture Dark Precious Hardwood Furniture

QB/T 2383-1998 餐桌、餐椅

本标准规定了餐桌餐椅(以下简称“产品”)的产品分类、技术要求、试验方法、检验规则及标志、标滚、包装等要求。 本标准适用于主要材料由木材或木质人造材料或(和)金属材料构成的产品，其他材料构成的产品可参照执行。 本标准不适用于桌椅连为一体的餐桌和餐椅。 注:本标准所指长桌餐椅是供家庭或商业场所室内就长便用的各种形状(方形、圆形、椭圆形、矩形)的独立的、可移动的桌子椅子〔包括凳子)。

dining table, dining chair

AS/NZS 3813:1998 整体式塑料椅

Specifies strength, durability and stability as well as marking requirements for plastic monobloc chairs. This Standard was developed by the Plastics and Chemicals Industry Association in conjunction with the now Australasian Furnishing Research and Development Institute.

Plastic monobloc chairs

NF S54-004:1998 儿童保育用品.携带式小床和立架.安全要求和试验

Child care articles. Carry cots and stands. Safety requirements and test methods.

BS 5873-4:1998 教育用具.教育机构用储存柜强度及稳定性规范

This Part of BS 5873 specifies strength and stability requirements for storage furniture for educational institutions, including lockers, secure storage and trolleys. This standard applies specifically to school furniture and is not applicable to office furniture used by the administrative staff. Two test levels, general and heavy, are specified. This Part of BS 5873 does not cover requirements and test methods for the security of fixed secure storage furniture which are dealt with in BS 5873 : Part 5.

Educational furniture. Specification for strength and stability of storage furniture for educational institutions

ASTM F1838-98(2008) 户外用儿童塑料椅标准实施要求

Tests and criteria as outlined determine the overall usability and stability of chairs in an environment simulating the conditions of use. Tests simulate two types of surfaces: Smooth surfaces such as linoleum, wet pool decks, etc. The glass testing base (see Fig. 2) is used to simulate this surface. Rough surfaces such as wooden decks, outdoor natural surfaces, etc. The plywood testing base (see Fig. 3) is used to simulate this surface. Note 18212;(A) Poly(methyl methacrylate) sheet, 0.25 ± 0.03-in. (6 ± 0.1-mm) thickness; (B) AC exterior glue fir plywood sheet, 0.75 ± 0.08 in. (19 ± 0.2 mm) or greater in thickness; (C) polypropylene microfoam sheet; 0.7 ± 0.01-lb/ft3 (11 ± 0.2-kg/m3) density and 0.13 ± 0.01-in. (3 ± 0.03-mm) thickness; and (D) glass/tempered sheet, 0.38 ± 0.04-in. (10 ± 0.1-mm) thickness. Note 28212;(A), (B), (C), and (D) shall be roughly the same dimensions, 48 in. (1219 mm) or greater. FIG. 2 Glass Testing Base Note 18212;(A) Poly(methyl methacrylate) sheet, 0.25 ± 0.03-in. (6 ± 0.1-mm) thickness; and (B) AC exterior glue fir plywood sheet, 0.75 ± 0.08 in. (19 ± 0.2 mm) or greater in thickness. Note 28212;(A) and (B) shall be roughly the same dimensions, 48 in. (1219 mm) or greater. FIG. 3 Plywood Testing Base1.1 These standard performance requirements establish nationally recognized performance requirements for Class A (residential) and Class B (nonresidential) child''s plastic chairs intended for outdoor use. 1.2 These standard performance requirements are not applicable to chaises, multi-positional chairs, upholstered chairs, or other types of furniture. 1.3 These standard performance requirements cover the performance of product regarding aspects of outdoor weathering, impact, static load, and rear leg testing. 1.4 Products Manufactured from Recycled Plastics: 1.4.1 Products may be manufactured from recycled plastics as long as the performance requirements are met. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Requirements for Child''s Plastic Chairs for Outdoor Use

ASTM F1912-98(2009) 豆袋椅安全的标准规范

1.1 This specification is intended to reduce choking and suffocation hazard(s) associated with bean bag chairs. 1.2 This specification covers bean bag chairs with and without zippers. 1.3 This specification covers two types of bean bag chairs: 1.3.1 Those designed to be refilled, and 1.3.2 Those designed with permanent closures and not intended to be refilled. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Safety of Bean Bag Chairs

ASTM F1858-98 户外用带有可调节背或活动靠背结构的多位塑料椅的标准性能要求

1.1 These performance requirements cover nationally recognized performance requirements for multipositional plastic chairs, with adjustable backs or reclining mechanisms, intended for outdoor use.

Standard Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use

ASTM F1912-98(2004) 豆袋椅安全标准规范

1.1 This specification is intended to reduce choking and suffocation hazard(s) associated with bean bag chairs. 1.2 This specification covers bean bag chairs with and without zippers. 1.3 This specification covers two types of bean bag chairs: 1.3.1 Those designed to be refilled, and 1.3.2 Those designed with permanent closures and not intended to be refilled. 1.4 The values stated in inch-pound units are to be regarded as the standard. The SI values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Safety of Bean Bag Chairs

ASTM F1858-98(2004)e1 户外用带有可调节背或活动靠背结构的多位塑料椅的标准性能要求

1.1 These performance requirements cover nationally recognized performance requirements for multipositional plastic chairs, with adjustable backs or reclining mechanisms, intended for outdoor use.1.2 These performance requirements are not applicable to chaise lounges, upholstered chairs, or other types of furniture.1.3 These performance requirements cover the performance of the product regarding aspects of outdoor weathering, impact, static load for seat and back, and arm testing.1.4 Products Manufactured from Recycled Plastics8212;Products may be manufactured from recycled plastics as long as the performance requirements are met.1.5 The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use

ASTM F1858-98(2008) 户外用带有可调节背或活动靠背结构的多位塑料椅的标准性能要求

Tests and criteria as outlined determine the overall usability and stability of chairs in an environment simulating the conditions of use. Tests simulate two types of surfaces: Smooth surfaces, such as linoleum, wet pool decks, etc. The glass testing base (see Fig. 5) is used to simulate this surface. Rough surfaces, such as wooden decks, outdoor natural surfaces, etc. the plywood testing base (see Fig. 6) is used to simulate this surface. Note 18212;(A) Poly(methyl methacrylate) sheet, 0.25 ± 0.03-in. (6 ± 0.1-mm) thickness; (B) AC exterior glue fir plywood sheet, 0.75 ± 0.08 in. (19 ± 0.2 mm) or greater in thickness; (C) polypropylene microfoam sheet; 0.7 ± 0.01-lb/ft3 (11 ± 0.2-kg/m3) density and 0.13 ± 0.01-in. (3 ± 0.03-mm) thickness; and (D) glass/tempered sheet, 0.38 ± 0.04-in. (10 ± 0.1-mm) thickness. Note 28212;(A), (B), (C), and (D) shall be roughly the same dimensions, 48 in. (1219 mm) or greater. FIG. 5 Glass Testing Base Note 18212;(A) Poly(methoyl methoacrylate) sheet, 0.25 ± 0.03-in. (6 ± 0.1-mm) thickness; and (B) AC exterior glue fir plywood sheet, 0.75 ± 0.08 in. (19 ± 0.2 mm) or greater in thickness. Note 28212;(A) and (B) shall be roughly the same dimensions, 48 in. (1219 mm) or greater. FIG. 6 Plywood Testing Base1.1 These performance requirements cover nationally recognized performance requirements for multipositional plastic chairs, with adjustable backs or reclining mechanisms, intended for outdoor use. 1.2 These performance requirements are not applicable to chaise lounges, upholstered chairs, or other types of furniture. 1.3 These performance requirements cover the performance of the product regarding aspects of outdoor weathering, impact, static load for seat and back, and arm testing. 1.4 Products Manufactured from Recycled Plastics8212;Products may be manufactured from recycled plastics as long as the performance requirements are met. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use

ASTM F1912-98 豆袋椅安全标准规范

1.1 This specification is intended to reduce choking and suffocation hazard(s) associated with bean bag chairs. 1.2 This specification covers bean bag chairs with and without zippers. 1.3 This specification covers two types of bean bag chairs: 1.3.1 Those designed to be refilled, and 1.3.2 Those designed with permanent closures and not intended to be refilled. 1.4 The values stated in inch-pound units are to be regarded as the standard. The SI values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Safety of Bean Bag Chairs

ARMY MIL-D-10821 G NOTICE 1-1997 实地桌

This commercial item description covers brown kraft paper used for general wrapping applications.

DESKS, FIELD

ISO 7175-2:1997 居室用儿童床和折叠床 第2部分:试验方法

This part of ISO 7175 specifies test methods that assess the safety of children's cots and folding cots for domestic use. It is applicable to cots and folding cots with an internal length between 900 mm and 1 400 mm that are designed to prevent the child from climbing out. It does not cover rocking and swinging cots. The tests are designed to be applied to a cot that is fully assembled and ready for use. NOTE — The test results are only valid for the article tested. When the test results are intended to be applied to other similar articles, the test specimen should be representative of the production model. In the case of designs not catered for in the test procedures, the test should be carried out as far as possible as described, and a list made of the deviations from the test procedure.

Children's cots and folding cots for domestic use - Part 2: Test methods

ISO 7175-1:1997 居室用儿童床和折叠床 第1部分:安全要求

This part of ISO 7175 specifies requirements relating to the safety of children's cots and folding cots for domestic use. It is applicable to cots and folding cots with an internal length of between 900 mm and 1 400 mm. It does not cover rocking and swinging cots. Annex A summarizes the dimensions referred to in this part of ISO 7175.

Children's cots and folding cots for domestic use - Part 1: Safety requirements

NF D61-061-1:1997 室外家具.野营、家用和定约用座位和桌子.第1部分:一般安全要求

Outdoor furniture: Seating and tables for camping, domestic and contract use. Part 1 : general safety requirements.

AIR FORCE MIL-S-27174 B NOTICE 1-1997 可变座椅宽度的部队座位

This notice should be filed in fiont of MIL-S-27174B (USAF), dated 29 June 1985.

SEAT, TROOP, VARIABLE SEATING WIDTH

NF D61-003:1997 家具.坐椅.稳固性测定(欧洲标准EN 1022)

Domestic furniture. Seating. Determination of stability.

JIS A 5901:1997 草编塌塌咪和草编夹层塌塌咪(日本席垫芯材)

Straw TATAMIDOKO and straw sandwich TATAMIDOKO

JIS A 5914:1997 非草编塌塌咪

Non straw TATAMIDOKO