Y88 工艺美术品 标准查询与下载

SANS 11210:1995 铂合金首饰中含铂量的测定．氯铂酸铵沉淀后重量法

Specifies a gravimetric method for the determination of platinum in platinum jewellery alloys, preferably within the range of fineness stated in ISO 9202. These alloys may contain palladium, iridium, rhodium, copper, cobalt, gold, ruthenium, gallium, chr

Determination of platinum in platinum jewellery alloys - Gravimetric method after precipitation of diammonium hexachloroplatinate

SANS 11427:1993 银合金首饰中含银量的测定．溴化钾容量法（电位滴定）

Specifies a volumetric method for the determination of silver in silver jewellery alloys, preferably within the range for fineness stated in ISO 9202. These alloys may contain copper, zinc, cadmium and palladium. Apart from palladium, which must be preci

Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using potassium bromide

JIS S 4700:1998 珠宝首饰.戒指规格.定义、测量和标识

この規格は，ジュエリー用指輪のサイズについて規定する。

Jewellery -- Ring-sizes -- Definition, measurement and designation

EN 1811:1998 合并修改件A1的与皮肤直接和长时间接触的产品中镍的释放量用参考试验方法

This European Standard specifies a method for simulating the release of nickel from articles intended to come into direct and prolonged contact with the skin in order to determine whether such items release nickel at a rate greater than 0,5 μg/cm2/week.

Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin Incorporates Amendment A1: April 2008

ISO 13756:1997 银合金中含银量的测定 氯化钠或氯化钾容量法(电位滴定)

This International Standard specifies a volumetric method for the determination of silver in silver jewellery alloys, preferably within the range of fineness stated in ISO 9202. These alloys may contain copper, zinc, cadmium and palladium. Apart from palladium, which must be precipitated before commencing titration, these elements do not interfere with this method of determination. NOTE — This method is an alternative method to ISO 11427 which has been identified as the reference method. note: 1) ISO 11427:1993, Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using potassium bromide.

Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using sodium chloride or potassium chloride

BS ISO 10713:1997 珠宝.金合金涂层

Specifies the coating thickness requirements and the gold fineness of the coating. Also defines current terms (in English, French, German) concerning gold alloy coatings. Does not apply to watch bracelets if they are permanently attached to the case.

Jewellery - Gold alloy coatings

DD 234-1996 抛光金刚石的分级.术语和分类

Specifies the terminology and classification to be used for the grading and description of natural, unmounted, polished diamonds.

Grading polished diamonds. Terminology and classification

QB/T 2120-1995 景泰蓝工艺品

本标准规定了手工景泰蓝工艺品的品种类别、尺寸规格、原材料、造型、色彩、分等规定、试验方法检验规则及标志、包装、运输、贮存。 本标准适用于手工景泰蓝工艺品。

Cloisonne Crafts

ISO/TR 11211:1995 抛光钻石的分级 术语和分级

Gives the terminology and classification to be used for grading and description of polished diamonds. Shall only be used for natural, unmounted, polished diamonds.

Grading polished diamonds - Terminology and classification

DIN EN ISO 11210:1995 铂装饰合金中铂含量的测定.六氯铂酸二铵沉淀后用重力测定法 (ISO 11210:1995); 德文版本 EN ISO 11210:1995

The document specifies a gravimetric method for the determination of platinum in platinum jewellery alloys, preferably within the range of fineness as stated in ISO 9202. Alloys may contain iridium, palladium, rhodium, copper, cobalt, less than 5 % tungsten, gold, ruthenium, gallium, chromium and indium. Some modifications are indicated where palladium, iridium, gold, ruthenium or rhodium are present.#,,#

Determination of platinum in platinum jewellery alloys - Gravimetric method after precipitation of diammonium hexachloroplatinate (ISO 11210:1995); German version EN ISO 11210:1995

DIN EN ISO 11489:1995 铂装饰合金中铂含量的测定.用汞氯化物还原的重力测定方法 (ISO 11489:1995); 德文版本 EN ISO 11489:1995

The document specifies a gravimetric method for determining platinum in platinium jewellery alloys, proferably within the range of fineness as stated in ISO 9202. This procedure applies specifically to platinum alloys incorporating iridium, palladium, gold, rhodium, copper, cobalt, ruthenium, gallium, chromium, indium and less than 5 % tungsten. Some modifications are indicated whrere palladium, gold, ruthenium, iridium or rhodium are present.#,,#

Determination of platinum in platinum jewellery alloys - Gravimetric method after reduction with mercury(I) chloride (ISO 11489:1995); German version EN ISO 11489:1995

DIN EN ISO 11490:1995 钯装饰合金中钯含量的测定.用二甲基乙二肟的重力测定方法 (ISO 11490:1995); 德文版本 EN ISO 11490:1995

The document specifies a gravimetric method for the determination of palladium in palladium jewellery alloys, preferably within the range of fineness as stated in ISO 9202 and which may contain silver, indium, gallium, copper, cobalt, nickel, tin and ruthenium. Conprecipitated elements have to be determined by a suitable method and correction applied.#,,#

Determination of palladium in palladium jewellery alloys - Gravimetric method with dimethyl glyoxime (ISO 11490:1995); German version EN ISO 11490:1995

SN/T 0366-1995 出口唐三彩装饰画检验规程

Rule for the inspection of tricolouredfrescoes for export

QB/T 2062-1994 贵金属首饰

本标准规定了贵金属首饰的产品分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于金、银、铂等贵金属及其合金制成的首饰，也适用干贵金属及其合金制成的工艺品及摆件。

precious metal jewelry

NF S54-200:1994 人造圣诞树 金属端保护

Arbres de Noël artificiels - Protection des extrémités métalliques

NF A70-010*NF EN 28653:1993 珠宝.戒指尺寸.定义、测量和标识

Jewellery. Ring-sizes. Definition, mesurage et designations.

QB/T 1689-1993 贵金属饰品术语

本标准规定了贵金属饰品、材料、工艺的术语及定义。 本标准适用于贵金属饰品行业。

Precious Metal Jewelry Terminology

QB/T 1690-1993 金银饰品重量测量允差的规定

本标准规定了金、银饰品及材料重量测量允差的技术要求、试验方法和标志。 本标准适用于以重量结算金、银饰品及材料的贸易.铂饰品及材料亦可参照使用。

Regulations on Tolerances for Weight Measurement of Gold and Silver Jewelry

BS EN 28653:1993 珠宝.戒指尺寸.定义.测量和命名

Specifies the method for measuring the size of rings for the purposes of designating ring sizes to be used in jewellery.

Jewellery - Ring-sizes - Definition, measurement and designation

DIN EN 28653:1993 珠宝.戒指规格.定义、测量方法和名称符号

This document specifies the method for measuring the size of rings for the purposes of designating ring-sizes to be used in jewellery.

Jewellery; ring-sizes; definition, measurement and designation (ISO 8653:1986); german version EN 28653:1992