Y99 其他轻工机械 标准查询与下载

DIN EN 12203:2010 鞋类, 皮革类, 人造皮革类生产设备. 鞋和皮革压花机. 安全性要求; 德文版本EN 12203: 2003+A1: 2009

This European Standard is applicable to shoe and leather presses(see 3.1) used in the manufacture of footwear, leather and imitation leather goods and other related components.

Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements; German version EN 12203:2003+A1:2009

QB/T 4021-2010 拉链机械 自动定寸去齿机

本标准规定了拉链机械自动定寸去齿机的分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于QB/T 2171～2173-2001中所有规格（码装拉链）的金属拉链、注塑拉链、尼龙拉链自动定寸去齿机。

Zipper machines.Auto gapping machine

QB/T 4023-2010 制鞋机械 锤平机

本标准规定了锤平机的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于对鞋用皮料进行自动上胶、分边的锤平机。

Footwear machines.Hammer machine

QB/T 4022-2010 制鞋机械 袋式、盖式胶粘压合机

本标准规定了袋式、盖式胶粘压合机的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于冷粘鞋工艺气动袋式、盖式胶粘压合机。

Footwear machines.Air-bag、cover-type sole attaching machine

QB/T 4020-2010 拉链机械 上(下)止注塑成型机

本标准规定了拉链机械上(下)止(前后码)注塑成型机的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于QB/T 2172～2173-2001注塑拉链、尼龙拉链中各种规格的开尾式和闭尾式上(下)止或开尾式上止和插座、插管的注塑成型机。

Zipper machines.Top (Boottom) stop injection molding machine

QB/T 1064-2010 制鞋机械 圆刀片革机

本标准规定了圆刀片革机的分类、要求、试验方法、检验规则、标志、使用说明、包装、运输和贮存。 本标准适用于制鞋行业将鞋帮及其他鞋帮零部件的边部片削成不同宽度、厚度和角度的坡茬的普通型圆刀片革机及程控型圆刀片革机的机械部分。

Footwear machine.Disk skiving machine

DIN EN 12044:2010 鞋类, 皮革类, 人造皮革类生产设备. 切割机穿孔机械. 安全性要求; 德文版本 EN 12044: 2005+A1: 2009

1.1 This standard specifies safety requirements for design, construction and operation of the machines defined in 1.2. It takes account of intended use, foreseeable misuse, component and systme failure. 1.2 This standard is applicable to cutting and punching machines used in the manufacture of footwear, leather and imitation leather goods and other related components.

Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements; German version EN 12044:2005+A1:2009

DIN EN 12387:2010 鞋, 皮革类, 人造皮革类生产设备. 标准尺寸鞋修理设备. 安全性要求; 德文版本 EN 12387: 2005+A1: 2009

The standard specifies safety requirements for construction, transport, installation, setting, adjustment, programming or converting, operating, cleaning, maintenance for the machines listed in 1.1. It takes account of intended use, foreseeable misuse as well as component and system failures.

Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements; German version EN 12387:2005+A1:2009

BS EN 1845:2007 鞋子制造机.鞋模机.安全要求

Footwear manufacturing machines - Footwear moulding machines - Safety requirements

QB/T 3008-2008 制鞋机械.钉鞋眼机

本标准规定了钉鞋眼机的分类与命名、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于制鞋行业中使用的钉鞋眼机；箱包、服装行业用来打孔、铆眼的专用设备，可参照使用。

Footwear machines.Eyeletting machine

QB/T 3009-2008 制鞋机械.冷冻定型机

本标准规定了冷冻定型机的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于胶粘皮鞋、线缝皮鞋、旅游鞋等产品在生产过程中使用冷冻定型机（不包括高架式）。

Footwear machines.Chill setting machine

DIN EN 1845:2008 制鞋机械.鞋模机械.安全要求

1.1 This European Standard applies to footwear moulding machines which are intended for use in the shoe industry for the production of footwear and footwear components. These machines are: -- direct-on sole moulding machines (see Figures 1, 2 and 3); -- unit sole and footwear component moulding machines (see Figures 4 to 10); -- full shoe and boot moulding machines (see Figure 11). This European Standard applies also to the mentioned machines when used for other products than footwear and footwear components, as far as these products require no other changes than a different mould. 1.2 This European Standard specifies safety requirements for construction, transport, installation, adjustment, setting, teaching or process change-over, operation, cleaning, maintenance, decommissioning, dismantling and, as far as safety is concerned, disposal for machines mentioned in 1.1. It deals with all significant hazards, hazardous situations and events relevant to footwear moulding machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). 1.3 The following machines are excluded from the scope of this European Standard unless used for direct- on sole moulding or reaction moulding: -- moulding machines with static injection units and static mould stations (clamping units); -- moulding machines with static metering and mixing units and mobile stations with linear configuration (mould carriers). 1.4 The European Standard does not deal with hazards created by the mixing and metering unit. NOTE For metering and mixing units, see EN 1612-1. The use of machines within the scope of this European Standard in industries other than those specified in 1.1 may give rise to hazards not considered during its preparation. NOTE For this application see also EN 201 and prEN 1612-2. 1.5 This European Standard also applies to the following additional equipment for material handling and operation which are an integral part of the machine: -- spraying devices, injection units, casting units, nozzle cleaners, sprue pullers, mould front edge cleaners, activating devices, robots and equipment for preparatory and subsequent treatment (see Figure M.1). 1.6 This European Standard assumes the machines: -- are operated by adequately trained persons; -- are used with adequate workplace lighting (see EN 12464-1). 1.7 This document is not applicable to footwear moulding machines which are manufactured before the date of publication of this European Standard by CEN.

Footwear manufacturing machines - Footwear moulding machines - Safety requirements; English version of DIN EN 1845:2008-06

QB/T 2982-2008 火焰复合机

本标准规定了火焰复合机的分类、要求、检验方法、检验规则和标志、包装、运输、贮存。 本标准适用于用火焰将一种具有粘结性能的材料快速加热与另一种或两种材料加压复合的火焰复合机。

Flame laminating machine

QB/T 2983-2008 胶粘复合机

本标准规定了胶粘复合机的术语和定义、分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于用胶粘法织造布、非织造布等材料相结合的胶粘复合机。

Glue laminating machine

QB/T 2937-2008 制鞋机械.框架式胶粘压合机

本标准规定了制鞋机械框架式胶粘压合机的分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于制鞋机械框架式胶粘压合机（以下简称“压合机”）。

Footwear mahcine.Frame cement attaching machine

NF G83-102*NF EN 1845:2008 制鞋机械.靴模机械.安全要求

Footwear manufacturing machines - Footwear moulding machines - Safety requirements.

QB/T 2936-2008 拉链机械.插座、插管全自动固定机

本标准规定了拉链机械插座、插管全自动固定机的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于在QB/T 2171-2001和QB/T 2173-2001中规定的所有规格金属拉链、尼龙拉链上安装金属制件的插座、插管全自动固定机（以下简称“固定机”）。

Zipper Machines.Auto Pin and Box Fixing Machine

QB/T 2935-2008 拉链机械.全自动超声波贴布机

本标准规定了拉链机械全自动超声波贴布机术语和定义、产品分类、技术要求、检验规则和标志、包装、运输、贮存。 本标准适用于QB/T 2171~2173-2001中所有规格的金属拉链、注塑拉链、尼龙拉链加强胶带全自动超声波贴布机（以下简称“贴布机”）。

Zipper machines.Auto ultrasonic film welding machine

SANS 1612:2007 纸张打孔器（台式）

Specifies requirements for 3 grades of paper punches in two-hole and four-hole configurations, suitable for use on desk tops.

Paper punches (desk top types)

QB/T 2866-2007 制鞋机械 聚氨酯浇注成型机

本标准规定了聚氨酯浇注成型机的术语和定义、分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于制鞋行业生产聚氨酯鞋底（或连帮成型）的聚氨酯浇注成型机（以下简称“浇注成型机”）。

Footwear machines. Polyurethane pouring moulding machine