Z10 环境污染物监测方法 标准查询与下载

BS PD CEN/TS 16660:2015 废弃物特性描述. 浸出性能试验. 减少特征和减少能力的测定

Characterization of waste. Leaching behaviour test. Determination of the reducing character and the reducing capacit

DB11/T 1195-2015 固定污染源监测点位设置技术规范

Technical specifications for the setting of monitoring points for fixed pollution sources

DB11/ 1195-2015 固定污染源监测点位设置技术规范

Technical specifications for the setting of monitoring points for fixed pollution sources

DB43/T 969-2014 污染源排放废水锰、铅、镉在线监测系统技术规范

Technical specifications for manganese, lead and cadmium online monitoring system for wastewater discharged from pollution sources

YZ/T 0135-2014 快递业温室气体排放测量方法

Measurement methods for greenhouse gas emissions in the express delivery industry

PD CEN/TS 16645:2014 环境空气.苯并[a]蒽,苯并[b]荧蒽,苯并[ J ]荧蒽,苯并[K]荧蒽,二苯并[a，h]蒽，茚并[1,2,3-cd]芘和苯并[ghi]苝的测量方法

This Technical Specification specifies a measurement method for the determination of the particle bound polycyclic aromatic hydrocarbon (PAH) compounds benz[a]anthracene (BaA), benzo[b]fluoranthene (BbF), benzo[j]fluoranthene (BjF), benzo[k]fluoranthene (BkF), dibenz[a,h]anthracene (DBahA), indeno[1,2,3-cd]pyrene (INP) and benzo[ghi]perylene (BghiP) in ambient air, which can be used in the framework of Council Directive 2008/50/EC and Directive 2004/107/EC. This document specifies performance characteristics and performance criteria for this measurement method. The performance characteristics of the measurement method are based on a sampling period of 24 h. This Technical Specification describes a measurement method which comprises sampling of the selected PAH compounds as part of the PM10 particles, sample extraction and analysis by high performance liquid chromatography (HPLC) with fluorescence detector (FLD) or by gas chromatography with mass spectrometric detection (GC-MS). The method is applicable for the measurement of the PAH compounds in the concentration range from approx. 0,04 ng/m 3 to approximately 20 ng/m 3 for BaA, BbF, BjF, BkF, BaP, INP and BghiP and 0,02 ng/m 3 to approximately 2 ng/m 3 for DBahA. Table 1 shows examples for concentrations of the compounds (annual mean values) for sampling sites with different characteristics. The lower limit of the applicable range depends on the noise level of the detector and the variability of the laboratory filter blank.

Ambient air - Method for the measurement of benz[a]anthracene@ benzo[b]fluoranthene@ benzo[j]fluoranthene@ benzo[k]fluoranthene@ dibenz[a@h]anthracene@ indeno[1@2@3- cd]pyrene and benzo[ghi]perylene

DIN EN 1948-4:2014 固定源排放. PCDD/PCDF和二恶英类PCB质量浓度的测定. 第4部分: 二恶英类PCB的取样和分析; 德文版本EN 1948-4-2010+A1-2013

Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs; German version EN 1948-4:2010+A1:2013

HJ 25.2-2014 场地环境监测技术导则

本标准规定了场地环境监测的原则、程序、工作内容和技术要求。本标准适用于场地环境调查、风险评估,以及污染场地土壤修复工程环境监理、工程验收、回顾性评估等过程的环境监测。本标准不适用于场地的放射性及致病性生物污染监测。

Technical guidelines for environmental site monitoring

DB13/ 1800-2013 在用压燃式发动机汽车排气烟度排放限值及测量方法

本标准规定了装用压燃式发动机在用汽车排气烟度检验的术语和定义、检验方法、排放限值与判定方法。本标准适用于装用压燃式发动机、最大总质量大于400 kg、最大设计速度大于或等于50 km/h的在用汽车。本标准不适用于低速汽车。

Exhaust Smoke Emission Limits and Measurement Methods of In-use Compression Ignition Engine Vehicles

DB13/ 1801-2013 在用点燃式发动机汽车排气污染物排放限值及测量方法

本标准规定了装用点燃式发动机在用汽车排气污染物排放检验的术语和定义、检验方法、排放限值与判定方法。本标准适用于装用以汽油、液化石油气(LPG)和天然气（NG）为燃料的点燃式发动机，最大设计车速等于或大于50 km/h的M类和N类汽车。

Limits and measurement methods of exhaust pollutants from in-use ignition engine vehicles

SL 219-2013 水环境监测规范

本标准适用于水环境与水生态监测,不适用于海洋水体监测。

Regulation for water environmental monitoring

DIN EN ISO 13833:2013 固定源排放. 生物量 (生命必需的) 和化石比率测定. 放射性碳取样和测定 (ISO 13833-2013); 德文版本EN ISO 13833-2013

Stationary source emissions - Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide - Radiocarbon sampling and determination (ISO 13833:2013); German version EN ISO 13833:2013

NF X43-343*NF EN ISO 13833:2013 固定源排放. 生物质(生物成因的)和化石衍生二氧化碳比例的测定. 放射性碳的取样和测定

Stationary source emissions - Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide - Radiocarbon sampling and determination

NF X30-483:2013 废弃物的表征.筛选方法选择和应用导则

Characterization of waste - Guidance on selection and application of screening methods

BS EN 16123:2013 废弃物特性.筛选方法选择和应用导则

Characterization of waste. Guidance on selection and application of screening methods

PD CEN/TS 16023:2013 废弃物表征.总热值测定和净热值计算

This Technical Specification specifies a simplified method for the determination of the gross calorific value of waste at constant volume and at the reference temperature of 25 °C in a bomb calorimeter calibrated by combustion of certified benzoic acid. This Technical Specification does not include thermo-chemical corrections. This Technical Specification also specifies a simplified calculation of the net calorific value from the gross calorific value. This Technical Specification is applicable for the evaluation of suitability of waste to be treated by thermal processes and for the energy to be recovered. This Technical Specification is applicable to all kinds of waste.

Characterization of waste - Determination of gross calorific value and calculation of net calorific value

DB43/T 744-2012 锰水质在线自动分析仪

Manganese water quality online automatic analyzer

DB43/T 743-2012 钴水质在线自动分析仪

Cobalt water quality online automatic analyzer

KS I 3547-2012 建筑材料的VOCS与低醛性能评估法.液体施工材料

이 표준은 흡착 시험 챔버를 이용하여 건축물의 실내 공기 중 VOCs와 알데하이드를 흡착·

Performance test methods for evaluating the reduction of VOCs(volatile organic compounds) and aldehyde concentrations by building material－Liquid phase building material

KS I 3546-2012 低污染建筑材料的VOCS与低醛性能评估.固体施工材料

이 표준은 흡착 시험 챔버를 이용하여 건축물의 실내 공기 중 VOCs와 알데하이드를 흡착ㆍ

Reduction performance test of VOCs (volatile organic compound) and aldehyde by contamination reduction building material - the solid phase building material