共找到 366 条与 电工合金零件 相关的标准,共 25 页
Measurement method of magnetic declination angle of permanent magnets
Test method for magnetic field distribution on permanent magnet surface
Specification for magnetic materials (iron and steel) for use in relays
Silver graphite electrical contacts technical conditions
本文件规定了硬磁材料(又称永磁材料)主要磁特性的最低值和尺寸公差。为提供一些参考信息,本文件也给出了材料的密度值和化学成分范围。 本文件适用于硬磁材料的检验。 注:附录B中表B.1 给出了磁性材料有关的附加机械物理性能值以供参考和比较。
Specification for magnetically hard materials
Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method
Technical requirements of permanent magnets for drive motor of electric vehicle
Methods for the determination of the relative magnetic permeability of feebly magnetic materials
Technical specification for silver-nickel,silver-iron electrical contacts
Copper-tungsten and silver-tungsten electrical contacts
本标准规定了电触头材料密度、硬度、体积电阻率、电导率、抗弯强度和拉伸试验方法。 本标准适用于各种电触头材料的密度、硬度、体积电阻率等基本性能的测量。
Test methods for essential property of electrical contact materials
本标准规定了1 000 kV变电站金具的一般技术要求、分类要求、连接与紧固、制造工艺和质量控制、试验与检验、标志与包装等。本标准适用于1 000 kV变电站内处于系统标称电压为1 000 kV的所有回路中构架跨线、设备间连接导体和绝缘子串的配套金具。
Technical specification for fittings of 1 000 kV substation
本标准规定了永磁(硬磁)材料磁性试验方法。本标准适用于铝镍钴永磁、铁氧体永磁、铁铬钴永磁、稀土永磁及其他永磁材料磁性能的测量。
Permanent magnet(magnetically hard)materials.Methods of measurement of magnetic properties
本标准规定了用永磁脉冲测量仪测量永磁(硬磁)材料磁性能的方法。本标准适用于稀土钴、稀土铁硼等内禀矫顽力较高的永磁材料的磁性能测量。本标准规定的方法是一种开磁路测量方法,永磁材料磁性能在闭合磁路下的测量方法在GB/T 3217中规定。本标准和GB/T 3217两种方法对同一测试对象的测量曲线比对参见附录A。
Guides for methods of measurement of the magnetic properties of permanent (magnetically hard)materials by pulsed field magnetometry
本标准规定了粉末冶金法和固相烧结法银镍石墨片状电触头的要求、试验方法、检验夫见贝‖、标志、包装、运输和贮存。 本标准适用于粉末冶金法和闹相烧结法生产的银镍石墨片状电触头〈以下简称电触头〉的检验和验收。 该产品主要应用于断路器中。
Specification for AgNiC contact
本标准规定了铜铬电触头的符号及标注方法、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于真空灭弧室用铜铬电触头产品的检验和验收。
Specification for CuCr electrical contact
本标准给出了主要电触头材料的正常组织、常见典型缺陷以及原材料粉末颗粒形貌金相图片。 本标准适用于在电触头材料金相检验时对照参考。
Metallographic atlas of electrical contact materials
本标准规定了电触头材料金相检测的方法。 本标准适用于在金相显微镜下观察和分析电触头材料组织及缺陷。
Metallographic examination of electrical contact materials
本标准适用于内禀矫顽力为500kA/m以下的磁性材料。应特别注意内禀矫顽力低于40A/m和高于160kA/m材料的测量。 本标准规定了在开磁路中测量磁性材料内禀矫顽力的方法。
Method of measurement of the coercivity of magnetic materials in an open magnetic circuit
本标准规定了烧结软磁材料的磁性能和机械性能,这些金属材料通过粉末冶金工艺制造,用于制作磁性元件。 本标准不适用于铸造或半成品的软磁产品。
Standard specifications for sintered soft magnetic materials
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号