25.160 焊接、钎焊和低温焊 标准查询与下载
共找到 158 条与 焊接、钎焊和低温焊 相关的标准，共 11 页
本标准规定了焊接（包括软、硬钎焊及热切割）专业的常用标准术语名称、定义及对应英文名称。 本标准适用于编写国家标准、行业标准、企业标准以及技术书籍、教材、论文报告。
Welding terminology
- ICS
- 25.160
- CCS
- J33
- 发布
- 1994-06-20
- 实施
- 1995-05-01
本标准规定了钢熔化焊接头的要求及缺陷的分级。 本标准适用于熔焊方法施焊的对接和角接（搭接及T型）接头。
Quality assurance of welding--Requirement for fusion welding joint of steel and classification for imperfection
- ICS
- 25.160
- CCS
- J33
- 发布
- 1990-09-08
- 实施
- 1991-10-01
本标准规定了金属材料焊接接头的夏比冲击试验方法，以测定试样的冲击吸收功。 本标准适用于熔焊和压焊对接接头。
Method of impact test for welded joint
- ICS
- 25.160
- CCS
- J33
- 发布
- 1989-05-08
- 实施
- 1990-01-01
Methods of the strength tests for brazed and soldered joint
- ICS
- 25.160
- CCS
- J33
- 发布
- 1989-05-08
- 实施
- 1990-01-01
Method of the strength test for brazed and soldered seam
- ICS
- 25.160
- CCS
- J33
- 发布
- 1988-02-01
- 实施
- 1988-08-01
Determination of ferrous iron content in reduced ilmenite powder for welding rod
- ICS
- 25.160
- CCS
- D31
- 发布
- 1987-12-25
- 实施
- 1989-01-01
Chemical analysis methods for tin-lead solders - Determination of phosphorus content
- ICS
- 25.160
- CCS
- H13
- 发布
- 实施
Method for chemical analysis of tin-lead solder Determination of phosphorus content
- ICS
- 25.160
- CCS
- H13
- 发布
- 实施
本文件适用于山西省内电子电气产品表面贴装焊接的质量保证。
Surface mount soldering requirements
- ICS
- 25.160
- CCS
- K 00
- 发布
- 2024-01-17
- 实施
- 2024-04-15
Methods for chemical analysis of elements in welding fumes
- ICS
- 25.160
- CCS
- 发布
- 2021-12-30
- 实施
IEC 60974-8:2021 is available as IEC 60974-8:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60974-8:2021 specifies safety and performance requirements for gas consoles intended to be used with combustible gases or oxygen. These gas consoles are designed to supply gases for use in arc welding, plasma cutting, gouging and allied processes in non-explosive atmospheres. The gas console can be external or internal to the power source enclosure. In the latter case, the power source shall meet the requirements of both IEC 60974-1 and this document. This third edition cancels and replaces the second edition, published in 2009. This edition constitutes a technical revision. The significant technical changes with respect to the previous edition are the following: - changes induced by the publication of IEC 60974-1:2017; - requirements for the rating plate as in IEC 60974-1:2017, Clause 15; - requirements for the instructions in 13.2. This part of IEC 60974 is to be used in conjunction with IEC 60974-1.
Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems
- ICS
- 25.160
- CCS
- 发布
- 2021-11-26
- 实施
- 2021-12-15 (7)
Arc welding equipment - Part 11: Electrode holders (IEC 60974-11:2021)
- ICS
- 25.160
- CCS
- 发布
- 2021-08-31
- 实施
- 2021-08-31
Arc welding equipment – Part 11: Electrode holders
- ICS
- 25.160
- CCS
- 发布
- 2021-06-22
- 实施
- 2021-06-22
Guide for the Fusion Welding of Titanium and Titanium Alloys (3rd Edition)
- ICS
- 25.160
- CCS
- H64
- 发布
- 2021-01-01
- 实施
RULES FOR MATERIALS AND WELDING JANUARY 2021 PART 2
- ICS
- 25.160
- CCS
- J33
- 发布
- 2021-01-01
- 实施
Arc welding equipment —Part 10: Electromagnetic compatibility(EMC) requirements
- ICS
- 25.160
- CCS
- 发布
- 2020-12-15
- 实施
Primer Spot Welding (5th Edition; English/Korean)
- ICS
- 25.160
- CCS
- G50/59
- 发布
- 2020-12-01
- 实施
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements
- ICS
- 25.160
- CCS
- 发布
- 2020-04-15
- 实施
- 0000-00-00
Arc welding equipment - Part 5: Wire feeders
- ICS
- 25.160
- CCS
- 发布
- 2019-01-30
- 实施
- 0000-00-00
