55.060 卷轴、线轴 标准查询与下载

GB/T 12124-2003 纸管

Paper cores

GB/T 16958-1997 包装用双向拉伸聚脂薄膜

本标准规定了包装用双向拉伸聚酯薄膜（以下简称聚酯膜）的产品规格、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以聚对苯二甲酸乙二醇酯树脂为原料，经双向拉伸制成薄膜的生产、使用、流通和监督检验。

Biaxially oriented polyester film for package

DIN 46391-4:2018 电缆和绞线的供线用绕线盘.第4部分:钢制绕线盘供线技术术语

The technical terms of delivery apply to steel drums according DIN 46391-1 and DIN 46391-3. For wooden drums, DIN 46391-2 is applicable. For other materials, corresponding terms of delivery must be agreed.

Delivery drums for cables and ropes - Part 4: Technical terms of delivery for steel drums

DIN 46391-2:2018 电缆和绞线的供线用绕线盘.第2部分:木质绕线盘供线技术术语

The technical terms of delivery apply to wooden drums according DIN 46391-1. If other materials are used, corresponding terms of delivery shall be agreed.

Delivery drums for cables and ropes - Part 2: Technical terms of delivery for wooden drums

DIN 46391-3:2018 电缆和绞线的供线用绕线盘.第3部分:法兰直径大于2800毫米的绕线盘.尺寸

This standard applies to drums with diameter of flange from 3000 to 4500 mm for delivery of cables and ropes.

Delivery drums for cables and ropes - Part 3: Drums with diameter of flange of more than 2 800 mm - Dimensions

GSO IEC 60264-4-1:2015 绕组线包装 第4-1部分：测试方法 塑料导电线轴

This part of IEC 60264 defines methods of test for delivery spools for winding wires made from thermoplastic materials in order to determine conformity with the established performance requirements for their properties.

Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplastic materials

DIN 46391-1:2014 电缆和绞线的交货用绕线盘. 第1部分:尺寸为2800 mm的交货用绕线盘, 尺寸

Delivery drums for cables and stranded conductors - Part 1: Delivery drums with diameter up to 2 800 mm, dimensions

DIN 46395:2014 机用线圈

Machine spools

KS C IEC 60264-2-3-2013 绕组线包装 第2部分：圆筒形输送线轴 第3部分：热塑性材料制成的不可回收线轴规范

Packaging of winding wires－Part 2：Cylindrical barrelled delivery spools－Section 3：Specification for non－returnable spools made fromthermoplastic material

KS C IEC 60264-2-3:2013 绕组线的封装 第2部分：圆柱形供线盘 第3节 由热塑性材料制成的不能回收使用的片盘规范

Packaging of winding wires－Part 2：Cylindrical barrelled delivery spools－Section 3：Specification for non－returnable spools made fromthermoplastic material

DIN EN 60264-4-1:2011 绕组线包装.第4-1部分:热塑性材料制造的输出线轴的试验方法(IEC 60264-4-1-1997 + A1-2009);德文版本EN 60264-4-1-2010

Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplastic materials (IEC 60264-4-1:1997 + A1:2009); German version EN 60264-4-1:2010

BS EN 60264-4-1:2011 绕组线的包装 试验方法 热塑性材料交货线盘

Packaging of winding wires. Methods of test. Delivery spools made from thermoplastic materials

BS EN 60264-4-1:2010 绕组线的包装.试验方法.热塑性材料交货线盘

Packaging of winding wires. Methods of test. Delivery spools made from thermoplastic materials

DS/EN 60264-4-1:2011 绕组线的包装 第 4-1 部分：测试方法 由热塑性材料制成的输送线轴

This part of IEC 60264 defines methods of test for delivery spools for winding wires made from thermoplastic materials in order to determine conformity with the established performance requirements for their properties.

Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplastic materials

ASTM D3693-02(2010) 缝纫线每支持标签长度标准规格

Standard Specification for Labeled Length per Holder of Sewing Thread

DIN EN 60264-1:2010 绕组线的封装.第1部分:漆包圆绕组线(IEC 60264-1-1968+A1-2009).德文版本EN 60264-1-1994+A1-2009

This standard specifies the general requirements to the packaging of winding wires.

Packaging of winding wires - Part 1: Containers for round winding wires (IEC 60264-1:1968 + A1:2009); German version EN 60264-1:1994 + A1:2009

IEC 60264-5-1:1997+AMD1:2003 CSV 绕组线的包装.第5-1部分:带锥形法兰的圆柱形桶装交货线盘.基本尺寸

Packaging of winding wires - Part 5-1: Cylindrical barrelled delivery spools with conical flanges - Basic dimensions

IEC 60264-3-1:1999+AMD1:2003 CSV 绕组线的包装.第3-1部分:锥形筒装交货线盘.基本尺寸

Packaging of winding wires - Part 3-1: Taper barrelled delivery spools - Basic dimensions

DS/EN 60264-4-2+A1/Corr.:2008 绕组线的包装 第4部分：测试方法 第 2 节：用于锥形桶形输送线轴的热塑性材料制成的容器

This standard describes methods of test for containers made from thermoplastic material to be used for taper barrelled delivery spools for winding wires.

Packaging of winding wires - Part 4: Methods of test - Section 2: Containers made from thermoplastic material for taper barrelled delivery spools

DIN 46397-31:2006 电线制造用线轴. 第31部分: 试验方法

This standard deals with test methods for production of wires.

Spools for production of wires - Part 31: Test methods