97.145 梯子 标准查询与下载

GSO EN 131-4:2023 梯子 第4部分：单个或多个铰接梯子

This document specifies the requirements, tests and marking of hinged combination ladders with one or several hinge joints. This document is not applicable to hinge-joints of combination and standing ladders as defined by EN 131-1. This part of the standard is intended to be used in conjunction with EN 131-1, EN 131-2 and EN 131-3.

Ladders - Part 4: Single or multiple hinge-joint ladders

ASTM F2175-23 住宅用便携式和永久性紧急逃生梯的标准规范

Standard Specification for Portable and Permanent Emergency Escape Ladders for Residential Use

BS 8634:2017+A1:2022 便携式屋顶梯子 规格

1   Scope This British Standard specifies requirements for portable roof ladders specifically designed solely to provide temporary access to pitched roofs with angles between 25° and 65° for tasks that are of short duration and low risk. In particular, it specifies: a) general design features, requirements and test methods; b) the supporting elements, the bearers and ridge hook , and their connections to the ladders, including how a ladder is supported and located by the ridge of a pitched roof; c) the pitch, dimensions and form of a roof ladder’s climbing surfaces, according to the intended angles of use; d) the wheels used to manoeuvre a roof ladder into position on a pitched roof; and e) markings and user instructions. Roof ladders conforming to this standard are only intended for use on pitched roofs with angles between 25° and 65° and for no other purpose. They are not intended for use as leaning or standing ladders. This British Standard covers single section roof ladders, extending roof ladders, roof ladders with hinge (articulated) joints, roof ladders with telesc...

Portable roof ladders. Specification

GSO EN 131-3:2022 梯子 第3部分：标记和用户说明

This European Standard advises on the safe use of ladders covered by the scope of EN 131 1 and fulfilling the requirements of EN 131 1, EN 131 2 and, for single or multiple hinged-joint ladders, EN 131 4, for telescopic ladders EN 131 6 and for mobile platform ladders EN 131 7.

Ladders - Part 3: Marking and user instructions

GSO EN 131-6:2022 梯子 第6部分：伸缩梯

This document specifies the general design features, requirements and test methods and defines terms for leaning and standing telescopic ladders. Ladders with extension elements are not covered by this part of EN 131. This part of the standard is intended to be used in conjunction with EN 131 1, EN 131 2, EN 131 3 and if applicable EN 131 4.

Ladders - Part 6: Telescopic ladders

GSO EN 14183:2022 踏脚凳

This European Standard specifies the requirements for step stools, stair type steps and dome type steps stools. This includes design characteristics, dimensions, materials, performance requirements, test methods and the declaration of suitability of use. The standard excludes ladders and stepladders as defined by EN131-1:1993. The requirements are based upon the maximum total load of 150 kg.

Step Stools

GSO EN 131-7:2022 梯子 第7部分：带平台的移动梯子

This European Standard defines terms and specifies the general design characteristics of mobile ladders with platform. It applies to mobile ladders with a working platform, with a maximum area of 1 m2, and a maximum platform height of 5 m, to be used only by one person at the time. The maximum load is 150 kg which includes a maximum combined load of the user and any tools, equipment and materials It does not apply to portable ladders according to EN131-1, to portable ladders according to EN131-4, to portable ladders for fire service use according to EN 1147, to loft ladders according to EN 14795, to step stools according to EN 14183, to Stairs, stepladders and guard-rails according to EN ISO 14122-3 and to insulating ladders according to EN 50528.

Ladders - Part 7: Mobile ladders with platform

T/ZZB 2427-2021 家用便携式铝合金折梯

本文件规定了家用便携式铝合金折梯的产品分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存及质量证明书和质量承诺。 本文件适用于家庭环境中使用的以铝合金为主材制造的便携式铝合金折梯（以下简称“梯子”）。 本文件不适用于两用折梯（两侧攀爬折梯和单梯两用的折梯）。

Household portable aluminium alloy folding ladder

BS EN 131-6:2019 梯子 伸缩梯

What is BS EN 131-6  -  Design features for telescopic ladders  about? BS EN 131-6  specifies the general design features, requirements, and test methods and defines terms for leaning and standing telescopic ladders. Note 1: Ladders with extension elements are not covered by this part of EN 131 . Note 2: BS EN 131-6  is intended to be used in conjunction with EN 131-1 , EN 131-2 , EN 131-3 and if applicable EN 131-4 . Who is BS EN 131-6  -  Design features for telescopic ladders  for? BS EN 131-6 on telescopic ladders applies to: Laboratories testing safety requirements of the telescoping ladder Telescopic ladder users Telescopic ladder Manufacturers Why should you use BS EN 131-6  -  Design features for telescopic ladders ? BS EN 131-6  specifies the general design features, requirements, and test methods for effective building of telescopic ladders. It provides manufacturers for manufacturing telescopic ladders as per the standard guidelines that guarantees the protection, smooth functioning, and reliability of the ladder. BS EN 131-6  specifies the durability test to ensure that the ladder can withstand the heavy-duty action and continue to perform effectively.  This ensures the safety of the end-user preventing accidents. What’s changed since the last update? BS EN 131-6:2019 supersedes BS EN 131‑6:2015 , which i...

Ladders. Telescopic ladders

BS EN 131-3:2008 梯子.使用说明书

This European Standard advises on the safe use of ladders covered by the scope of EN 131-1 and fulfilling the requirements of EN 131-1, EN 131-2 and, for single or multiple hinged-joint ladders, EN 131-4 used as standing or leaning ladders.

Ladders - Part 3:User instructions

EN 131-3:2018 梯子.第3部分:用户说明

Ladders - Part 3: Marking and user instructions

CSA Z11-2018 便携式梯子

1 Scope 1.1 This Standard applies to common types of portable ladders and includes design and performance- related requirements and tests. 1.2 Ladders covered by this Standard are intended for use by only one person at a time under normal conditions of usage, with the exception of trestle ladders, which are designed for use by two persons at the same time. 1.3 This Standard does not specify details on the construction of portable ladders. The requirements listed in this Standard are intended to specify certain minimum characteristics of strength and stability deemed necessary for the safe use of portable ladders. 1.4 This Standard covers single-section ladders, multiple-section ladders, trestle ladders, step ladders, step stools, tri-pod ladders, combination ladders, platform ladders, articulated ladders, and telescoping ladders, but does not cover ladder accessories (e.g., ladder levellers, ladder stabilizers or stand-off devices, ladder jacks, or ladder straps or hooks) that can be installed on, or used in conjunction, with ladders. Note: Although ladder accessories themselves are not covered by this Standard, a ladder containing accessories can be certified if it meets the requirements of this Standard (see ANSI/ASC A14.8 for specific requirements for ladder accessories). 1.5 In addition, this Standard stipulates requirements for selection, care, and use of portable ladders. 1.6 The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only. 1.7 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

Portable ladders

DIN EN 131-2:2017 梯子.第2部分:试验,标记和要求.德文版本EN 131-2-2010+A2-2017

Ladders - Part 2: Requirements, testing, marking; German version EN 131-2:2010+A2:2017

NF E85-050-2/IN2*NF EN 131-2/IN2:2017 梯子 第2部分：要求、测试、标记

Ladders - Part 2 : requirements, testing, marking

EN 131-2:2010+A2:2017 梯子.要求,试验和标志 包含修改件A2,2017

This European Standard specifies the general design features, requirements and test methods for portable ladders. It does not apply to step stools or ladders for specific professional use such as firebrigade ladders, roof ladders and mobile ladders. It does not apply to ladders used for work on or near live electrical systems or installations. For this purpose EN 61478 applies. NOTE For insulating ladders for use on or near low voltage electrical installations EN 50528 applies. This European Standard is intended to be used in conjunction with EN 131-1. For single or multiple hinge joint ladders EN 131-4 applies. For telescopic ladders EN 131-6 applies. For mobile ladders with a platform EN 131-7 applies.

Ladders - Part 2: Requirements, testing, marking

DIN EN 131-6:2017 梯子. 第6部分：伸缩梯；德文和英文版本prEN 131-6:2017

This European Standard specifies the general design features, requirements and test methods and defines terms for leaning and standing telescopic ladders.

Ladders - Part 6: Telescopic ladders; German and English version prEN 131-6:2017

GSO EN 131-3:2016 梯子 第3部分：用户说明

This European Standard advises on the safe use of ladders covered by the scope of EN 131 1 and fulfilling the requirements of EN 131 1, EN 131 2 and, for single or multiple hinged-joint ladders, EN 131 4 used as standing or leaning ladders.

Ladders - Part 3: User Instructions

GSO EN 131-2:2016 阶梯 第2部分：要求、测试、标记

This European Standard specifies the general design features, requirements and test methods for portable ladders. It does not apply to step stools or ladders for specific professional use such as firebrigade ladders, roof ladders and mobile ladders. It does not apply to ladders used for work on or near live electrical systems or installations. For this purpose EN 61478 applies. This European Standard is intended to be used in conjunction with EN 131 1. For single or multiple hinge joint ladders EN 131 4 applies.

Ladders - Part 2: Requirements, testing, marking

NF E85-050-6:2015 梯子 第6部分：伸缩梯

Ladders - Partie 6 : telescopic ladders

DIN EN 131-6:2015 梯子 第6部分：伸缩梯；德文版 EN 131-6:2015

Ladders - Part 6: Telescopic ladders; German version EN 131-6:2015