返回 默克密理博Synergy超... 返回 默克密理博Synergy超... 
我要纠错
| 电阻率（25°C 时为 MΩ·cm） |
18.2 Ultrapure Water 18.2 |
| TOC，ppb– Synergy 系统* | < 10 |
| TOC，ppb– Synergy UV 系统* | < 5 |
| 终端过滤器 | 0.22µm 除菌过滤器或 BioPak纯化柱 |
| 尺寸 | |
| 高，cm (in.) | 54 (21.3) |
| 宽，cm (in.) | 29 (11.4) |
| 厚，cm (in.) | 38 (15) |
| 操作重量，kg (lb)–Synergy 系统 | 9.7 (21.4) |
| 操作重量，kg (lb)–Synergy UV 系统 | 10.2 (22.5) |
| 流速，L/min | 高达 1.2 |
技术参数：
以RO、蒸馏、去离子、或Elix预处理的纯水作为进水
电阻率18.2 MΩ·cm@25℃
流速>1.5L/min
TOC （无185/254 nm 紫外灯） < 10 ppb
TOC （有185/254 nm 紫外灯） < 5 ppb
颗粒 （> 0.22μm）** < 1 个/mL
细菌（Synergy system） < 0.1 cfu/mL
细菌（Synergy UV system）** < 0.01 cfu/mL
内毒素*** < 0.001 Eu/mL
RNases*** < 0.01 ng/mL
DNases*** < 4 pg/μl
* 正常运行条件下
** 以Millipak® Express 20（0.22μm）膜过滤器或者BiopakTM超滤柱作为终端精制器的情况下
| Resistivity at 25 °C | 18.2 MΩ•cm |
| TOC1 (Synergy® system) | ≤ 10 ppb |
| TOC1 (Synergy® UV system) | ≤ 5 ppb |
| Particulates (size > 0.22 µm)2 | < 1 particulate/mL |
| Bacteria (Synergy® system)2 | < 0.1 CFU/mL |
| Bacteria (Synergy® UV system) 3 | < 0.01 CFU/mL |
| Pyrogens (endotoxins)3 | < 0.001 EU/mL |
| RNases3 | < 0.01 ng/mL |
| DNases3 | < 4 pg/µL |
| Flow Rate | > 1.5 L/min |
| 1in the appropriate test conditions 2with Millipak® final filter 3with Biopak® polisher These values (validated with Elix® feed water) are typical and may vary depending on the nature and concentration of contaminants in the feed water. | |
| Feed water quality | Elix®, RiOs™, distilled or DI water with conductivity < 100 µS/cm and TOC < 50 ppb |
| Feed water connection | ½” Gaz M |
| Feed water pressure * | 0 - 0.3 bar |
| Feed water temperature | 5 - 35 °C |
| * For pressure above 0.3 bar, a pressure regulator needs to be installed upstream of the system; for pressures between 0 and -0.2 bar, the system will operate, but product flow rate may be lower. | |
| Dimensions (H x W x D) | 540 x 290 x 380 mm (21.3 x 11.4 x 15 in) |
| Operating weight (Synergy® systems) | 9.7 kg (21.4 lb) |
| Operating weight (Synergy® UV system) | 10.2 kg (22.5 lb) |
| Operating weight (Remote dispenser) | 2.68 kg (5.91 lb) |
| Electrical power supply voltage | 100 - 250 V +/- 10 % |
| Electrical power supply frequency | 50 - 60 Hz +/- 10 % |
The Synergy® systems are tested by an independent and accredited company for compliance with the CE directives related to safety and electromagnetic compatibility. The report can be consulted on demand. The Synergy® systems are built using components and practices recommended by UL and has been cUL marked. The registration can be verified on the UL web site (http://www.ul.com).