516-2009 发布历史

Foreword?Live-line maintenance of transmission lines began in the early 1920s and developed into a major working practice as the transmission systems were expanded and the voltages increased. In the 1950s@ when the transmission line voltage exceeded 300 kilovolts phase-to-phase@ the use of fiberglass to replace wooden tools made a significant change in the industry. Economic conditions prohibited the construction and operation of redundant lines@ and the need for live-line maintenance of transmission line increased rapidly. During the 1950s and 1960s@ several papers were written regarding the safety aspects of live-line maintenance. In the early 1970s@ the IEEE Transmission and Distribution Committee recognized the need to consolidate information on live-line maintenance@ and thus@ a task group was formed to write a guide. The task group later became the Engineering in Safety@ Maintenance@ and Operation of Lines Subcommittee (ESMOL). This guide was started in the late 1970s and was published in 1986 on a trial-use basis. In 1987@ the guide was released as a full-use ANSI/IEEE Standard. In 1990@ and again in 1995@ the ESMOL Subcommittee started revisions to the guide to bring it up to the current state of the art and into conformance with other international standards issued in recent years. The ESMOL Subcommittee has added sections from other ESMOL-sponsored standards in this edition to expand the scope of the standard to cover more of the industryapos;s needs. During the original development of the guide@ it was not intended that it would be used as a document to establish government regulations. However@ since its publication in 1986@ several government regulatory agencies have used the guide in their rule making. This edition of the guide includes revisions that make it more compatible for use in governmental regulations. ScopeThis guide provides general recommendations for performing maintenance work on energized power lines. It is not intended to include all of the proven practical methods and procedures; however@ these selected comprehensive recommendations are based on sound engineering principles@ engineering safety considerations@ and field experience by many utilities. Included are technical explanations as required to cover certain laboratory testing of tools and equipment@ in-service inspection@ maintenance and care of tools and equipment@ and work methods for the maintenance of energized lines and for persons working in the vicinity of energized lines.

516-2009由IEEE - The Institute of Electrical and Electronics Engineers@ Inc. 发布于 2009-05-13，并于 2009-07-13 实施。

516-2009 发布之时，引用了标准

155 *， 2013-11-01 更新

* 在 516-2009 发布之后有更新，请注意新发布标准的变化。

516-2009的历代版本如下：

1986年02月01日 516-1986
1987年01月01日 516-1987
1995年01月01日 516-1995
2003年07月29日 516-2003
2009年05月13日 516-2009

非常抱歉，我们暂时无法提供预览，您可以试试：免费下载 516-2009 前三页，或者稍后再访问。

注意：点击下载后，生成下载文件时间比较长，请耐心等待......

标准号: 516-2009
发布日期: 2009年05月13日
实施日期: 2009年07月13日
废止日期: 无
中国标准分类号: /
国际标准分类号: /
发布单位: IEEE - The Institute of Electrical and Electronics Engineers@ Inc.
引用标准: 155

适用范围: Foreword?Live-line maintenance of transmission lines began in the early 1920s and developed into a major working practice as the transmission systems were expanded and the voltages increased. In the 1950s@ when the transmission line voltage exceeded 300 kilovolts phase-to-phase@ the use of fiberglass to replace wooden tools made a significant change in the industry. Economic conditions prohibited the construction and operation of redundant lines@ and the need for live-line maintenance of transmission line increased rapidly. During the 1950s and 1960s@ several papers were written regarding the safety aspects of live-line maintenance. In the early 1970s@ the IEEE Transmission and Distribution Committee recognized the need to consolidate information on live-line maintenance@ and thus@ a task group was formed to write a guide. The task group later became the Engineering in Safety@ Maintenance@ and Operation of Lines Subcommittee (ESMOL). This guide was started in the late 1970s and was published in 1986 on a trial-use basis. In 1987@ the guide was released as a full-use ANSI/IEEE Standard. In 1990@ and again in 1995@ the ESMOL Subcommittee started revisions to the guide to bring it up to the current state of the art and into conformance with other international standards issued in recent years. The ESMOL Subcommittee has added sections from other ESMOL-sponsored standards in this edition to expand the scope of the standard to cover more of the industryapos;s needs. During the original development of the guide@ it was not intended that it would be used as a document to establish government regulations. However@ since its publication in 1986@ several government regulatory agencies have used the guide in their rule making. This edition of the guide includes revisions that make it more compatible for use in governmental regulations. ScopeThis guide provides general recommendations for performing maintenance work on energized power lines. It is not intended to include all of the proven practical methods and procedures; however@ these selected comprehensive recommendations are based on sound engineering principles@ engineering safety considerations@ and field experience by many utilities. Included are technical explanations as required to cover certain laboratory testing of tools and equipment@ in-service inspection@ maintenance and care of tools and equipment@ and work methods for the maintenance of energized lines and for persons working in the vicinity of energized lines.

516-2009

Guide for Maintenance Methods on Energized Power Lines