Application:   用途
-          These hardening furnaces are suitable for all industrial and glass technologies where a very precise temperature distribution and a dynamic progression of the temperature curve are required. Especially for hardening, annealing, artificial ageing, curing, heat treatment, preheating glass forms, and metal use before armoring under an oxidizing atmosphere
-          这些箱式电阻炉可以针对那些需要非常精确的温度分布和温度曲线动态演变的材料生产技术。特别是对于硬化，退火，人工老化，固化，热处理，预热玻璃等形式，可以在部分保护气体下用作装料的热处理。
 
Description of the construction of the furnace:   主要结构描述
-          frame construction covered with metal plate,
-          框架结构，固定独立的箱体
-          furnace insulated with light-weight bricks
-          炉子用轻质砖保温
-          heating spirals on ceramic tubes on the side walls and in grooves at furnace bottom
-          炉子采用4面加热系统，电热丝被缠绕在陶瓷板上，并被安装在各个部位
-          door equipped with safety terminal switch
-          门上设有安全开关终端
-          electrical installation on back side of furnace
-          电力装置被安装在炉子的背面
-          switchboard on side of furnace
-          控制板在炉子的侧面
-          termocouple type K
-          K型热电偶
-          semiconductor contact switch relay
-          半导体触点开关继电器
 
Standard equipment of the furnace covers:    标准设备包括
-          manually opening door
-          手动开门
-          HT40P controller
-          HT40P控制器
-          the door opens downwards
-          门向下打开
-          Stand(except models PKE18 and PKE25)
-          架子(PKE18-PKE25没有架子)      
-          optimum temperature uniformity according to DIN 17052-1
-          zei佳温度均匀性符合DIN 17052-1
 
Like an accessories as an extra we are bidding:     可选附件
-          graphic temperature recorder
-          图像温度记录仪
-          metal plate on furnace bottom
-          陶瓷保护板
-          interface R 232/485,
-          R 232/485连接端口
-          door opening using pneumatic cylinder
-          门采用气压动力打开
-          SiC side cover plates
-          硅材料侧保护板
-          set for protection atmosphere supply
-          整套的气体输入端口
 
Benefits:   优点
-          attractive design,
-          设计独特
-          top insulating materials (low power consumption, possibility of the fast start on the asked temperature),
-          顶级的绝缘材料（耗电量底，可在要求的温度下迅速启动）
-          independent limit unit protected furnace against destroyed,
-          独立限制单位，避免电炉的不良使用
-          programmable temperature adjustment with the high accuracy,
-          高精度可编程温度调节系统
-          solid state relay (more fluent and silent running, the minimum disturbance of the surrounding mechanism),
-          固态继电器（较流畅和安静运行，因此对周围设施产生的震动极小）
-          perfect workshop processing, the hardware and safety in service.
-          完美的生产工艺，硬件和安全服务

Typ LAC	Tmax	Volume	External dimension	Internal dimension	Input	Weight	Voltage
	ºC	l	(wxhxd) mm	(wxhxd) mm	kW	kg	V
PKE 12/12	1280	12,2	700x1400x850	250x200x250	3	95	230
PKE 18/12	1280	17,5	700x1400x950	250x200x350	3,5	115	230
PKE 18/12R	1280	17,5	700x1400x950	250x200x350	5,5	115	400
PKE 25/12	1280	25	700x1400x1100	250x200x500	7	140	400
PKE 45/12	1280	44	800x1350x110	350x200x500	13	165	400
PKE 65/12	1280	65	800x1350x1350	350x250x750	16	195	400
PKE 90/12	1280	87	800x1350x1600	350x250x1000	18	225	400