ApplicationS:  用途
-          Furnaces with maximum applicable temperature 1300°C a 1400°C,  used for development, fast firing and tests of materials, ceramic firing, glass and china ornaments.
-          该箱式炉可应用的温度范围极广能达到1300°C到 1400°C，可用于新设备、快烧、陶制品烘烤、玻璃及陶瓷装饰品等材料的测试。
 
Description of the construction of the furnace:   主要结构描述
-          frame welded from L profiles of construction steel, to which are interpolated the U metal plates
-          箱体由L型钢组成，坚固耐用
-          hinge of the door placed on the left side, clamps on the right
-          high-quality material insulation of the chamber and the door for the temperature 1300°C
-          炉箱与门由高端材料制成，其绝缘温度达到1300°C
-          panel thickness 30-40mm for the temperature 1400°C
-          30-40mm的镶嵌板温度可达1400°C
-          whole furnace secluded by sedge of mineral grain and lining of the bricks
-          炉壁用矿砂层隔离，并以方砖衬里
-          heating secured via heating coils
-          通过加热线圈保障供热
-          heating elements placed on the bearing piping inserted into the holders
-          电热装置设在插入固定器的轴承管上,保证连续供热
-          heating placed on the sides, inside of the bottom, at the back side and at the door
-          热能装置设在两侧、箱内底部、箱内后部及门旁
-          door procurated by safety precaution limit switch
-          炉门由安全警报极限开关控制
-          controller CERAMIC allows saving of 20 control programs in the internal controller memory, each program can consist of up to 15 steps, operator may start the select program on a preset date and time thanks to the installed real time clock
-          陶器控制器的内部控制器可以保存20条控制程序，每条程序由至少15步组成，操作员可以按照安装的实时钟表选择预设的时间和日期。
-          thermocouple type S, Solid State Relay (SSR)
-          S型热电偶，固态继电器
 
Standard equipment of the furnace includes:    标准设备包括
-          manual door opening to the left side
-          手动开门--门向下打开
-          CERAMIC temperature controller
-          CERAMIC控制器
-          stand
-          架子
-          heating on sides and in the bottom
-          对加热部分的保护板
-          optimum temperature uniformity according to DIN 17052-1
-          zei佳温度均匀性符合DIN 17052-1
 
Optional accessories to the furnace (for additional charge)     可选附件（需要另行计费）
-          graphic temperature recorder
-          图像温度记录仪
-          enhancement of the controller with the RS 232 or RS 485 communication line
-          电脑连接端口
-          manually operated inlet of protective atmosphere for one gas
-          整套的气体输入端口
-          metal plate on furnace bottom
-          底部的金属保护板
-          door opening using pneumatic cylinder
-          门采用气压动力打开
-          additional SiC side cover plates
-          硅材料侧保护板
 
Benefits:   优点
-          rust-free design
-          无锈独特设计
-          attractive
-          吸引人的设计
-          optimal temperature distribution
-          完美的温度分布
-          top-quality insulating materials for low power consumption, and enabling rapid achievement of required temperature
-          顶级绝缘材料（耗电量低，可在要求的温度下迅速启动）
-          thigh accuracy programmable temperature adjustment
-          高精确度的空气调整系统
-          solid state relay for  fluent and silent operation with minimum disturbance of the surrounding area
-          固态继电器（运转流畅且无声，因此对周围设施产生的震动 极小）
-          high-quality worksmanship, hardware and follow-up service
-          完善的服务系统，包括加工车间、硬件及安全保险设备
 

类型	zei高温度	内积	外部尺寸        （宽高深）	内部尺寸      （宽高深）	输入	重量	电压
LAC	°C	L	mm	mm	kW	kg	V
KC 20/13	1300	20	760x1250x850	270x270x270	8	160	400
KC 40/13	1300	40	945x1470x1020	350x350x350	9	170	400
KC 80/13	1300	80	985x1540x1070	430x430x430	12	280	400
KC 120/13	1300	120	1080x1480x1120	500x500x500	15	350	400
KC 20/14	1400	20	760x1250x850	270x270x270	9	160	400
KC 40/14	1400	40	945x1470x1020	350x350x350	11	170	400
KC 80/14	1400	80	985x1540x1070	430x430x430	13	280	400
KC 120/14	1400	120	1080x1480x1120	500x500x500	18	350	400