● 检测参数:厚度,直径(长度),硬度和质量
● 测量模式:恒力法和恒速法
● 硬度测量范围:2-300N(5-500N可选)
● 可选硬度单位:N, Kp,Sc
● 厚度测量范围:2-12mm
● 直径测量范围:2-30mm
● 片重:可连接Mettler或Sartorius分析天平,分辨率0.1mg
● 接口:RS 232、USB、LAN接口
● 全身不锈钢机身
● 标配IQ和OQ文档
Hardness Testing Range | 2.0 – 300.0N (optional 5.0 – 500.0N and 10 – 1000N) |
Hardness Accuracy | Better than 1N |
Thickness Testing Range | 2.00 – 12.00mm |
Thickness Accuracy | Better than ±0.05mm |
Diameter Testing Range | 2.00 – 30.00mm without magazine |
Possible Sample Size (When Using a Magazine) | length max. 25mm, width/diameter max. 20mm |
Diameter Accuracy | Better than ±0.05mm |
Weight Measurement | by using a connected, external Mettler-Toledo or Sartorius balance (balance not included in standard supply scope), the individual or average weight can be recognized and automatically transferred to the PTB420. |
Weight Testing Range | 0.0001g – 99.9999g |
Measuring Units | Thickness and diameter selectable between millimeter [mm] (factory setting) and inches [In] Hardness selectable between Newton [N] (factory setting), Kilopond [kp] and Strong Cobb [Sc] |
Force Mode | Selectable between linear force increase and constant speed |
Force Rate: lin. force | 5 – 200 N/sec. |
Force Rate: constant speed | 5 – 250 mm/Min. |
Display | Back-lit color LCD |
Keyboard | Alpha-numeric keypad and click wheel |
User Settings User / Passwords Methods Procedures Products | Memory for user defined settings: up to 50 up to 200 up to 100 up to 100 |
Feeder | Tablet magazine for 10 samples available (optional) |
Laser Type | Class 1 |
Interface |
|
Instrument Housing | Stainless steel (304) to meet GLP requirements |
Power | 110/230 Volt AC, 50/60 Hz |
Current Consumption | 0,25A at 230V; 0,5A at 115V; 60W |
Main Fuse | 2 x T2,0A |
Grade of Pollution | 2 |
Operational Altitude | 0 – 2000 m; 0 – 6500 ft |
Installation Requirements | » Ambient Temperature 10-40°C » Relative Humidity 20-90%rH » Desk with at least 50 kg working load. All around the instrument at least 10cm free distance to walls or other equipment. Free access to the mains power plug and switch. No special ventilation necessary. |
Use of Corrosive Materials | 0,1 NHCL approved, no other solvents permitted, see cleaning instructions. Possible residues must be removed immediately (see “Cleaning Instructions”) |
Instrument Dimensions | approx. 400 x 530 x 400 mm (Length x Width x Height) |
Packaging Dimensions | approx. 500 x 590 x 440 mm (Length x Width x Height) |
Net / Gross Weight | approx. 20 kg / 30 kg (without optional asseccories) |
Certification | All components certified to USP / EP requirements |
CE / EMC Certification | All CE / EMC Certification provided |
Validation | All IQ & OQ documents included |