【技术特点】-- SLQY-96A多功能塑料球压痕硬度仪

塑料球压痕硬度仪

多功能塑料球压痕硬度仪（带洛氏）

SLQY-96B

多功能塑料球压痕硬度仪满足标准：

GB-T3398.1-2008-塑料硬度测定仪第1部分：球压痕法

GBT 3398.2-2008 塑料 硬度测定 第2部分：洛氏硬度

GBT 23257-2009 埋地钢质管道聚乙烯防腐层

多功能塑料球压痕硬度仪概述：

塑料球压痕硬度仪是在指用直径为5MM的钢球，在规定试验负荷作用下，垂直压入试样表面，保持30S后计算球压痕面积上所承受的平均压力测试仪。

多功能塑料球压痕硬度仪特点：

1、 本仪器核心控制部分通过7寸触摸屏设置参数并控制。

2、 本仪器变形采集利用国内领先的微型位移传感器技术，最小位移采集精度为：0.001MM，淘汰了利用数字千分表采集位移精度低、易坏及需要更换电池等缺陷

3、 设置好参数后，点开始实验后自动加载，实验结束后自动计算结果，同时压头自动复位到初始位置进行下次实验

4、 本仪器带有微型打印机，可以对试验结果进行打印。

5、 本仪器具有3种实验类型：球压痕实验、洛氏硬度、耐压实验

多功能塑料球压痕硬度仪主要配置及附件：

　 主机一套

　 主机压头 ￠5mm

微型打印机一台

使用说明书一份:

备注：本仪器标准随机配件为球压痕实验，如需要其它实验，请另行选配

亲英文版介绍

Multifunctional plastic ball indentation hardness tester (with Rockwell)

SLQY-96B

Multifunctional plastic ball indentation hardness tester to meet the standard:

GB-T3398.1-2008- plastic hardness tester first parts: ball indentation method

GBT 3398.2-2008 plastic hardness determination of second parts: the Rockwell hardness

GBT 23257-2009 of polyethylene coating for buried steel pipeline

Multifunctional plastic ball indentation hardness tester overview:

Plastic ball indentation hardness tester is refers to with a diameter of 5MM ball, in the specified test load, the vertical pressure into the surface of the sample, the average pressure tester is calculated to keep 30S received after the ball indentation area..

Multifunctional plastic ball indentation hardness tester features:

1, the instrument is the core control part through a 7 Inch Touch screen set up parameters andcontrol.

2, the deformation of instrument collection by using technology of micro displacement sensor isthe leading domestic, minimum displacement acquisition accuracy: 0.001MM, eliminated usingdigital micrometer acquisition displacement accuracy is low, easily damaged and need to replace the battery and other defects

3, a good set of parameters, start automatic loading experiment, automatic calculation of the results after the end of the experiment, at the same time indenter automatic reset to the initial position for the next experiment

4, the instrument with a micro printer, you can print the test results.

5, this instrument has 3 types of experiments: ball indentation experiment, Rockwell hardness,compressive experiment

The main configuration and accessories of multi-functional plastic ball indentation hardness tester:

Host a

The host pressure head of 5mm

Miniature printer

The use of a specification sheet:

Note: the standard random accessories for the ball indentation experiments, such as the need for other experiments, please use separate selection

塑料球压痕硬度仪

【技术特点对用户带来的好处】-- SLQY-96A多功能塑料球压痕硬度仪

【典型应用举例】-- SLQY-96A多功能塑料球压痕硬度仪