TMC SEM-Base® VI 主...
参数指标我要纠错


Specifications-

Performance Specifications
Active degrees of freedom6
Active bandwidth0.6 Hz - 100 Hz
Passive natural frequency12 Hz nominal
Effective active resonant frequency0.5 Hz
Isolation at 1 Hz40% - 70%
Isolation at 2 Hz90%
Isolation at ≥3 Hz90-98%
Internal noise<0.1 nm RMS
Operating load rangeStandard capacity: 900 - 2,500 lbs (408 - 1134 kg)
High capacity: 2,500 - 3,200 lbs (1134 - 1452 kg)
Static lift capacity12,000 lbs (5454 kg)
Magnetic field emitted
at maximum 4 in.(102 mm)
from the platform		<0.02 μG broadband RMS
Design, Dimensions, and Environmental and Utility Requirements
Environmental and safetyCE and RoHS compliant
Active isolation elementshigh-force piezoelectric actuators that receive signal
from a high-voltage amplifier with an output of up to 800 VDC
Passive isolation elementsingle stiff elastomer (no compressed air supply required)
Vibration sensor elementsdownward facing geophone type inertial sensors
that measure floor vibration below the isolator
and deliver voltage proportional to the velocity of vibration motion
Active feedback control loopFloor vibration is measured, processed
and attenuated below the spring
supporting the isolated surface
Dimensions (WxD)35.25 x 44.25 in.
895 x 1124 mm
Height6.3 in. (160 mm) nominal,
doesn't change when SEM-Base is switched off
Operating temperature50° - 90° F
10° - 32° C
Storage temperature-40° - 130° F
-40° - 55° C
Humidity (operating)30 - 60%
System power requirements100, 120, 230, 240 VAC
50/60 Hz AC; <600 W
CE compliant
Floor displacement<800 μin. (20 μm) below 10 Hz
Built-in Controller Specifications
Processor150/75 MHz dual core
Sampling rate10 kHz
Analog outputs16 channels
Analog inputs16 channels
Status lightsingle LED
Front panel ports1x serial USB 2.0
1x serial Micro-USB
1x Ethernet RJ-45
2x BNC
User interfaceFront panel LCD display
Character menu on HyperTerminal
Extended GUI for Microsoft Windows
Embedded Ethernet GUI

Performance-


1800>

我要提交参数指标
相关光学平台