返回 默克密理博Milli-Q IQ... 返回 默克密理博Milli-Q IQ... 
我要纠错
ech2o®无汞UV灯用于有机污染物的光氧化
净化盒比以前的小33％
| Resistivity at 25 °C1 | 18.2 MΩ•cm |
| TOC2 | ≤ 5 ppb |
| Particulates (size > 0.22 µm)3 | < 1 particulate/mL |
| Bacteria3,4 | < 0.01 CFU/mL |
| Pyrogens (endotoxins)4 | < 0.001 EU/mL |
| RNases4 | < 1 pg/mL |
| DNases4 | < 5 pg/mL |
| Flow Rate | Up to 2 L/min |
| 1resistivity can also be displayed non-temperature-compensated as required by USP 2in the appropriate test conditions 3with Millipak® final filter 4with Biopak® polisher These values (validated with Elix® feed water) are typical and may vary depending on the nature and concentration of contaminants in the feed water. | |
A report on conformity of Milli-Q® Reference water quality to Type 1 water quality as described by ASTM®, ISO® 3696 and CLSI® norms, and to Purified Water as described in USP and EP is available upon request.
| Feed water quality | Elix®, RiOs™, distilled or DI water with conductivity < 100 µS/cm and TOC < 50 ppb |
| Feed water connection | ½” Gaz M |
| Feed water pressure * | 0 - 0.3 bar |
| Feed water temperature | 5 - 35 °C |
| * For pressure above 0.3 bar, a pressure regulator needs to be installed upstream of the system; for pressures between 0 and -0.2 bar, the system will operate, but product flow rate may be lower. | |
进水产水参数/国际一致性
