供气压力:6 bar (0.6 MPa, 87 PSI)
供气流速:48/24位 200/160 升/min
水浴温度:室温-90℃,准确度±2℃
升温速度:20-55℃,40分钟
气流范围:48/24位 3.5/5.5升/分钟
The system can operate using inert gas. Compressed air can be used but is not recommended with some solvents due to the possible risk of explosion. The gas tube supplied with the system has a 6 mm outer diameter. An adapter for connecting a gas tube with an outer diameter of 1/4“ can be purchased separately.
Note: There is no regulator for the gas inlet supplied with the system. This can be purchased separately as an optional accessory (P/N 352281SP Air Control Unit and P/N 353480SP Supply Connection Set).
Required supply pressure for full flow capability全流速供气压力: 6 bar (0.6 MPa, 87 PSI).
Maximum pressurezei大压力: 9 bar (0.9 MPa, 130 PSI).
Required supply flow for full flow capability for each manifold: 供气流速:48/24位 200/160 升/min
48 positions: 200 litres/min
24 positions: 160 litres/min
Ambient to 90°C, ± 2°C accuracy 室温-90℃,准确度±2℃
Heating time from 20°C to 55°C is approx. 40 mins. 20-55℃,40分钟
The maximum gas flow depends on the gas supply pressure and flow, the number of available nozzles and how many that are open. The maximum gas flow for each nozzle:
48 positions: 3.5 litres/min
24 positions: 5.5 litres/min
Trifluoroacetic acid 5 % 三氟乙酸5%
Trichloroacetic acid 5 % 三氯乙酸5%
Formic acid 5 % 甲酸5%
Acetic acid 10 % 醋酸10%
Phosphoric acid 5 % 磷酸5%
Propionic acid 5 % 丙酸5%
Ammonium hydroxide 10 % NH4OH10%
Triethylamine 10 % 三乙胺10%
48 positions for 10-16 mm (OD) x<45 mm (length) mini vials
48 positions for 10-20 mm (OD) x 75-165 mm (length) tubes
24 positions for 12-30 mm (OD) x 75-165 mm (length) tubes
7 Inch Touch Screen 7英寸触摸屏
Connection for end-point detection
The system must be either connected to ventilation system using the exhaust outlet at the rear of the system or placed in a well-ventilated fume hood or an equivalent enclosure to reduce the risk of exposure to harmful solvent vapours. The ventilation system or fume hood must be capable of exhausting 1 m3/min (35.3 ft3/min).
Connection: The exhaust hose supplied with the system is 3.8 meters (12.5 feet) and has a 50.8 mm (2“) inner diameter.
18°C to 32°C
-25°C to 60°C
20% to 90% RH (non-condensing)
100-127 V and 220-240 V at 50/60 Hz
F10A at the power inlet (1 required)
1000 VA
17 kg (37.5 lbs) when the water bath is empty and maximum 29 kg (63.9 lbs) with deionized water, rack, and tubes.
400 x 400 x 390 mm (15.7“ x 15.7“ x 15.4“) including the hinges at the side and exhaust at the rear. The height with the lid open is 590 mm (23.2“).
75 dB(A)
CE marked and CB and NRTL certified.
气源要求 zei小入口压力:60psi;
zei大入口压力:100psi;
气体排空埠和管道 随机提供5.1cm 内径;3.8m 长排空管;
电源要求: 230V,50Hz;
尺寸: 54cm 宽×30cm 高×31cm 深。