北广精仪HMYX-2000计算机控制海绵泡沫压陷硬度测试仪（适用于国家要求对海绵泡沫软质材料A法、B法、C法下对标准的海绵泡沫试样进行测试）

•压陷硬度测试仪制作标准：  
           GB10802软质聚氨醋泡沫塑料           
           GB10807-2006 软质泡沫聚合材料压陷性能测试标准

•海绵压陷测定仪技术参数：
（1）、速度：100mm/min；   
（2）、压陷硬度测定范围:0-2000.0 N
（3）、测力小分辨率:0.25 N  
（4）、测定误差:<1%


其他海绵检测仪器
落球回弹试验仪HMLQ-500
拉伸强度试验机HMLS-1000
疲劳压陷试验机HMPL-2000 
压缩变形测试仪HMYS

本仪器英文版简介

All of precision instrument and HMYX-2000 computer control sponge foam indentation hardness tester(applicable to national requirements to test sponge foamsamples on standard foam soft materials, A method, B method, C method)

• indentation hardness testers standard:

GB10802 soft polyurethane foam

GB10807-2006 soft foam polymeric material indentationtesting standards

• sponge indentation tester technical parameters:

(1), speed: 100mm/min;

(2), indentation hardness measurement range: 0-2000.0 N

(3), the force resolution: 0.25 N

(4), error: <1%

• indentation hardness features:

☆ automatic reset: the computer is connected to the start of the experiment instruction, automatic reset system.

☆ automatic return: fracture of the specimen, automatically return to the initial position.

☆ automatic shift: according to the size of the load, can switch different gear, ensuring measurement accuracy.

☆ change speed: This machine according to different samples, arbitrarily change the test speed.

☆ indication calibration: calibration system can realize thevalue of the.

☆ control method: according to the testing requirementscan test methods test force, velocity, displacement, straintest.

A multi-purpose machine: sensors with different specifications, can realize the use of a machine.

☆ curve traversal: after completion of the test, the mouse can be used to find out the test curve of arbitrary point of the stress and deformation data and analysis.

☆ display: dynamic data and test curve display.

☆ results: test results can access, analyze the data curve.

☆ limit: with programmed and mechanical limit.

☆ overload: stop automatically when the load exceeds the rated value.

• foam indentation hardness characteristics:

☆ sag is set in advance, through the timing circuit for accurately controlling the subsidence quantity;

☆ convenient use: high precision of the pressure sensor and the large scale integrated circuit;

Accurate determination of ☆: provide three methods fordetermination of indentation hardness;

☆ pressure head runs smoothly, the speed of 100mm/min;

☆ indentation hardness measurement range: 0-2000 N

☆ force minimum resolution: 0.2 N

☆ measurement error: <1

Other sponge detection instrument

Ball rebound tester HMLQ-500

Tensile strength testing machine HMLS-1000

Fatigue indentation test machine HMPL-2000

Compression deformation tester HMYS