61109-2008
Isolateurs pour lignes aériennes – Isolateurs composites de suspension et d’ancrage destinés aux systèmes à courant alternatif de tension nominale supérieure à 1 000 V – Définitions@ méthodes d'essai et critères d'acceptation (Edition 2.0)

Insulators for overhead lines – Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V – Definitions@ test methods and acceptance criteria (Edition 2.0)

61109-2008 发布历史

This International Standard is applicable to composite insulators for use as suspension/tension line insulators@ but it is to be noted that these insulators can occasionally be subjected to compression or bending@ for example when used as phase-spacers. Composite insulators designed primarily to resist bending loads@ e.g. line post insulators@ are not included in the scope of this Standard.This standard deals with those composite insulators which include a "core" and a "housing". The core is usually made of resin-impregnated glass fibres. The housing can be manufactured from a variety of materials including elastomers (e.g. silicone@ ethylene-propylene); resins (e.g. cycloaliphatic epoxy); or fluorocarbons (e.g. polytetrafluoroethylene).The object of this Standard is to:- define the terms used;- prescribe test methods;- prescribe acceptance criteria.This standard does not include requirements dealing with the choice of insulators for specific operating conditions.

61109-2008由IEC - International Electrotechnical Commission 发布于 2008-05-01，并于 2008-05-31 实施。

61109-2008的历代版本如下：

• 1992年03月01日 61109-1992 Isolateurs composites destinés aux lignes aériennes à courant alternatif de tension nominale supérieure à 1000 V - Définitions@ méthodes d?essai et critères d?acceptation (Edition 1.0; Amendment 1: 4/1995)
• 2008年05月01日 61109-2008 Isolateurs pour lignes aériennes – Isolateurs composites de suspension et d’ancrage destinés aux systèmes à courant alternatif de tension nominale supérieure à 1 000 V – Définitions@ méthodes d'essai et critères d'acceptation (Edition 2.0)

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 61109-2008 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

61109-2008

发布日期

2008年05月01日

实施日期

2008年05月31日

废止日期

无

中国标准分类号

/

国际标准分类号

/

发布单位

IEC - International Electrotechnical Commission

引用标准

62

适用范围

This International Standard is applicable to composite insulators for use as suspension/tension line insulators@ but it is to be noted that these insulators can occasionally be subjected to compression or bending@ for example when used as phase-spacers. Composite insulators designed primarily to resist bending loads@ e.g. line post insulators@ are not included in the scope of this Standard.This standard deals with those composite insulators which include a "core" and a "housing". The core is usually made of resin-impregnated glass fibres. The housing can be manufactured from a variety of materials including elastomers (e.g. silicone@ ethylene-propylene); resins (e.g. cycloaliphatic epoxy); or fluorocarbons (e.g. polytetrafluoroethylene).The object of this Standard is to:- define the terms used;- prescribe test methods;- prescribe acceptance criteria.This standard does not include requirements dealing with the choice of insulators for specific operating conditions.