AMS5659P-2014

Steel@ Corrosion-Resistant@ Bars@ Wire@ Forgings@ Rings@ and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu (UNS S15500)

AMS5659P-2014 发布历史

Form This specification covers a corrosion-resistant steel in the form of bars@ wire@ forgings@ flash welded rings@ and extrusions in the solution heat treated condition (See 8.3)@ and stock for forging@ flash welded rings@ or extruding. For purchase of solution treated and aged product@ use the applicable AMS slash specification (See 8.3). If a slash sheet description is not specified@ solution annealed material shall be supplied. A specific example of a slash specification is: AMS5659/H1025 ?C Precipitation Hardened to H1025 condition Application These products have been used typically for parts requiring corrosion resistance and high strength up to 600 ??(316 ?? with good ductility and strength in the transverse direction in large section sizes@ but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions.

AMS5659P-2014由SAE - SAE International 发布于 2014-02-01，并于 2015-04-14 实施。

AMS5659P-2014的历代版本如下：

• 2014年02月01日 AMS5659P-2014

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 AMS5659P-2014 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

AMS5659P-2014

发布日期

2014年02月01日

实施日期

2015年04月14日

废止日期

无

中国标准分类号

/

国际标准分类号

/

发布单位

SAE - SAE International

引用标准

9

适用范围

Form This specification covers a corrosion-resistant steel in the form of bars@ wire@ forgings@ flash welded rings@ and extrusions in the solution heat treated condition (See 8.3)@ and stock for forging@ flash welded rings@ or extruding. For purchase of solution treated and aged product@ use the applicable AMS slash specification (See 8.3). If a slash sheet description is not specified@ solution annealed material shall be supplied. A specific example of a slash specification is: AMS5659/H1025 ?C Precipitation Hardened to H1025 condition Application These products have been used typically for parts requiring corrosion resistance and high strength up to 600 ??(316 ?? with good ductility and strength in the transverse direction in large section sizes@ but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions.