AMS2488B-1989

ANODIC TREATMENT OF TITANIUM AND TITANIUM ALLOYS

AMS2488B-1989 发布历史

Purpose: This specification establishes the engineering requirements for producing an eletrolytic conversion (anodic) coating on titanium and titanium alloys and the properties of the coating. Application: Type 1 is used primarily as a lubricating and antigalling coatinq for elevated-temperature forming of titanium and titanium alloys. Type 2 is used primarily for protection against galling and galvanic corrosion@ for improved wear resistance@ and for pretreatment in the application of dry film lubrication. Classification: Coatinqs are classified by end-product application@ as follows: Type 1 - As a coating for elevated-temperature forming. Type 2 - As an antigalling coating without additional lubrication or as a pretreatment for dry film lubricants. Such coatings also are compatible with hypergolic propellants such as hydrazineunsymmetrical- dimethylhydrazine and nitrogen tetroxide@ and are electrically semiconductive. Type 2 shall be furnished unless type 1 is specified. Safety-HazardousMaterials: While the materials@ methods@ applications and processes described or referenced in this specification may involve the use of hazardous materials@ this specification does not address the hazards which may be involved in such use. It is the sole responsibility of the user to ensure familiarity with the safe and proper use of any hazardous materials and to take necessary precautionary measures to ensure the health and safety of all personnel involved.

AMS2488B-1989由SAE - SAE International 发布于 1989-10-01，并于 2013-06-25 实施。

AMS2488B-1989的历代版本如下：

• 1989年10月01日 AMS2488B-1989

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 AMS2488B-1989 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

AMS2488B-1989

发布日期

1989年10月01日

实施日期

2013年06月25日

废止日期

无

中国标准分类号

/

国际标准分类号

/

发布单位

SAE - SAE International

引用标准

7

适用范围

Purpose: This specification establishes the engineering requirements for producing an eletrolytic conversion (anodic) coating on titanium and titanium alloys and the properties of the coating. Application: Type 1 is used primarily as a lubricating and antigalling coatinq for elevated-temperature forming of titanium and titanium alloys. Type 2 is used primarily for protection against galling and galvanic corrosion@ for improved wear resistance@ and for pretreatment in the application of dry film lubrication. Classification: Coatinqs are classified by end-product application@ as follows: Type 1 - As a coating for elevated-temperature forming. Type 2 - As an antigalling coating without additional lubrication or as a pretreatment for dry film lubricants. Such coatings also are compatible with hypergolic propellants such as hydrazineunsymmetrical- dimethylhydrazine and nitrogen tetroxide@ and are electrically semiconductive. Type 2 shall be furnished unless type 1 is specified. Safety-HazardousMaterials: While the materials@ methods@ applications and processes described or referenced in this specification may involve the use of hazardous materials@ this specification does not address the hazards which may be involved in such use. It is the sole responsibility of the user to ensure familiarity with the safe and proper use of any hazardous materials and to take necessary precautionary measures to ensure the health and safety of all personnel involved.