ANSI/CAN/UL/ULC 1316:2018由SCC 发布于 2018-11-21。
ANSI/CAN/UL/ULC 1316:2018在国际标准分类中归属于: 23.020.10 固定容器和罐。
ANSI/CAN/UL/ULC 1316:2018 易燃和可燃液体纤维增强地下储罐标准的最新版本是哪一版?
最新版本是 ANSI/CAN/UL/ULC 1316:2018 。
ANSI/CAN/UL/ULC 1316:2018 由 CAN/ULC-S615-14 CAN/ULC-S615-14 变更而来。
1 Scope 1.1 This Standard sets forth minimum design and construction requirements for fibre reinforced plastic, non-pressure tanks that are used for the underground storage of flammable and combustible liquids, such as: a) Petroleum products, including petroleum hydrocarbon fuels with low-biofuels blends, per specifications, and similar flammable or combustible liquid petroleum derivatives, such as fuel components (cetane, hexane, heptane), and oils (lubricating, hydraulic, machine); b) Oxygenated fuel blends, including all "petroleum product" liquids plus petroleum hydrocarbon fuels with low-biofuels blends; c) Oxygenates, including all “petroleum product” and "oxygenated fuel blends" liquids plus pure/ denatured or highest oxygenated blend stocks for use in mixing of dispensed lower fuel-blends and components, such as biodiesel and ethanol; and d) Other flammable and combustible liquids (for which the test fuels in Appendix A are not considered to be sufficient or applicable) that can be demonstrated or determined to be compatible with the reinforced plastic underground tank materials as determined by the certifier. In addition to this Standard’s traditional safety requirements for underground fiber reinforced plastic tanks that primarily evaluate structural integrity, material compatibility and mitigate environmental hazards from loss of liquid containment under expected normal conditions; optional construction and/or performance requirements, and associated ratings, intended to address more severe conditions associated with the effects of Climate Change are included in Appendix F. NOTE: The test fuels in Appendix A are considered to be sufficient and representative for US or Canadian approved motor fuels, offroad fuels, gasoline from renewable and petroleum feedstocks, diesel, renewable diesel, synthetic diesel, biodiesel, kerosene, aviation fuels, jet fuels, fuel oil and heating oil as referenced in (a), (b), and (c). 1.2 This Standard covers tanks of either single, double or multiple wall construction. 1.3 Tanks covered by this Standard are fabricated, inspected, and tested for leakage prior to shipment from the factory as completely assembled vessels. 1.4 This Standard covers tanks where the primary tank may have a single compartment or have multiple compartments. 1.5 These tanks are intended for installation and use in accordance with applicable documents in the following list: a) In Canada: 1) National Fire Code of Canada; 2) CAN/CSA-B139, Installation code for oil-burning equipment; 3) CCME PN1326, Environmental Code of Practice for Aboveground and Underground Storage Tank Systems Containing Petroleum and Allied Petroleum Products; 4) Regulations of the authority having jurisdiction; and b) In the Unites States 1) Standard for the Installation of Oil-Burning Equipment, NFPA 31; 2) Flammable and Combustible Liquids Code, NFPA 30; and 3) Code for Motor Fuel Dispensing Facilities and Repair Garages, NFPA 30A, as applicable. 1.6 Accessories, such as, ladders, tank sumps, risers, and guide lugs, that do not affect tank performance and are attached to the tank internally or externally during manufacture are permitted but not covered by this standard. 1.7 Except for optional Climate Change Adaptation requirements in Appendix F, these requirements do not cover special evaluations for resistance to, or use after earthquakes, floods, high wind events, or other natural disasters. NOTE: See the Note at the beginning of Appendix F for further information on the terms “Adaptation” and “Mitigation”, as they pertain to Climate Change.
温馨提示1、对储存可燃气体,易燃液体的储罐,应配备必须的消防设备,严禁在罐内吸烟,明火照明、取暖,以及将其发火源带入罐区内;2、对存储易燃、易爆、有毒、腐蚀等介质的储罐,应严格执行危险品管理的有关规定;3、储罐检验和修理前必须切断与储罐有关的电气设备的电源,必须办理设备交接手续;4、储罐内部介质排尽后,应关闭进出阀或加设盲板隔断与其连接的管道和设备,并设有明显的隔断标志;5、对于盛装易燃、腐蚀、有毒或窒息性介质的储罐...
01、平面布置易燃易爆罐区要保证防火堤、事故池严密不漏,坚固可靠,其容积符合规范要求;罐区内的罐间距、罐与工艺装置等必须符合国家标准。02、消防设施罐区的半固定式泡沫管线接口要引到防火堤外,且保证处于良好的使用状态;易燃液体物料储罐的喷淋设施,在高温季节要能投用;罐区的环形消防道路要畅通,且能保证非常状态下消防车的通行。...
进入易燃易爆库区的运输车辆应进行"三征"检查并加装防火罩、带小型防火器材。对于带压的储存设施,泄压装置是防火防爆的重要安会装置,包括安全阀和爆破片以及呼吸阀和放空管。9、储存不稳定的烯烃、二烯烃时应有防自聚的措施,因为自聚过程会放热,增大火灾、爆炸的危险性。可采用指示装置,如:压力表(液化气储存等)、温度计、液位计和高位报警器(可燃液体储罐)等,定期检查或校准、检定。...
4.磁致伸缩液位计易于安装和维护简单:磁致伸缩液位仪一般通过罐顶已有管口进行安装,特别适用于地下储罐和已投运储罐的安装,并可在安装过程中不影响正常生产。 5.便于系统自动化工作:磁致伸缩液位计的二次仪表采用标准输出信号,便于微机对信号进行处理,容易实现联网工作,提高整个测量系统的自动化程度。...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号