EN 15218:2022
空间冷却用带蒸汽冷凝器和电驱动压缩机的空气调节装置和液态制冷包.术语,定义,试验条件,试验方法和要求

Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling - Terms, definitions, test conditions, test methods and requirements

2023-06

 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 EN 15218:2022 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “购买” 按钮开始采购(由第三方提供)。

点击下载后,生成下载文件时间比较长,请耐心等待......

 

标准号
EN 15218:2022
发布
2022年
发布单位
欧洲标准化委员会
当前最新
EN 15218:2022
 
 
适用范围
This document specifies the terms, definitions, test conditions, test methods and requirements for rating the performance of air conditioners and liquid chilling packages, with electrically driven compressors and with evaporatively cooled condenser when used for space cooling. The evaporatively cooled condenser is cooled by air and by the evaporation of external additional water. This additional external water is fed by a specific water supply circuit or by a water tank. This document is not applicable to air-to-air and air-to-water air conditioners with a condenser cooled by air and by the evaporation of water condensed on their evaporator. This document is applicable to units equipped with a water tank or with a continuous water circuit supply that can also operate without water feeding. However, this document only concerns the testing of these units with water feeding. This document is applicable to factory-made units which can be ducted. This document is applicable to factory-made units of either fixed capacity or variable capacity by any means. Packaged units, single split and multisplit systems are covered by this document. With regard to units consisting of several parts, this document applies only to those designed and supplied as a complete package. For evaporatively cooled condenser units that can also operate in heating mode, their performance in this mode is determined according to EN 14511:2022 (all parts). Units used for industrial processes cooling are not within the scope of this document. This document specifies the conditions for which performance data will be declared for compliance with the Ecodesign Regulation 206/2012 and with the Energy Labelling Regulation 626/2011 of air conditioners with evaporatively cooled condenser in cooling mode. NOTE All the symbols given in this text can be used regardless of language.

EN 15218:2022相似标准


推荐

高低温湿热试验箱六种制冷方式

压缩机功能:把制冷剂蒸气从低压状态压缩至高压状态,创造了制冷剂在冷凝器中常温液化条件。被称为整个装置“心脏”。冷凝器功能:使压缩机排出制冷剂 过热蒸气冷却,并凝结为制冷剂液体,在冷凝器制冷热量排放给冷却介质。分类:水冷式冷凝器、风冷式冷凝器、蒸发式冷凝器。风冷式冷凝器:使用安装方便,不需要冷却水、热量由分机将其带入大气中。...

新规 | 230项行业标准、两项计量技术规范批准发布!

JB/T 10737-20072021-04-01  53 JB/T 11204-2020内燃机硅油风扇离合器  技术条件本标准规定了内燃机硅油风扇离合器术语定义、产品分类、代号、产品型号规格标记方法、技术要求、检验方法、检验规则、标志、包装、运输及贮存。本标准适用于往复式内燃机冷却系统中用热双金属感温元件来自动控制冷却风扇转速硅油风扇离合器。...

涉多个环保标准 工信部公示报批261项行业标准

16     JB/T 13778-2019压缩机起动器用正温度系数热敏电阻芯片本标准规定了压缩机起动器用正温度系数热敏电阻芯片(简称PTC芯片)术语定义、类型与型号、技术要求试验方法、检验规则、标志、包装、运输贮存。本标准适用于压缩机起动辅助起动用PTC起动器内部使用PTC芯片。...

高低温交变湿热试验制冷常识你懂多少

对于回液较难避免制冷系统,安装气液分离器采用抽空停机(即停机前让压缩机抽干蒸发器中液态制冷剂)控制可以有效阻止或降低回液危害二、高低温交变湿热试验液启动 1、回气冷却压缩机在启动时,曲轴箱内润滑油剧烈起泡现象叫液启动。 2、液启动时起泡现象可以在油视镜上清楚地观察到。 ...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号