EN 1999-1-2:2023由欧洲标准化委员会 IX-CEN 发布于 2023-03-22,并于 2023-06-30 实施,于 2028-03-30 废止。
EN 1999-1-2:2023在国际标准分类中归属于: 13.220.50 建筑材料和构件的阻燃性。
1.1 Scope of EN 1999-1-2 (1) EN 1999-1-2 deals with the design of aluminium structures for the accidental situation of fire exposure and is intended to be used in conjunction with EN 1999-1-1, EN 1999-1-2, EN 1999-1-3, EN 1999-1-4 and EN 1999-1-5. This document only identifies differences from, or supplements to, normal temperature design. (2) EN 1999-1-2 applies to aluminium structures required to fulfil a load bearing function. (3) EN 1999-1-2 gives principles and application rules for the design of structures for specified requirements in respect of the aforementioned function and the levels of performance. (4) EN 1999-1-2 applies to structures, or parts of structures, that are within the scope of EN 1999 1 1 and are designed accordingly. (5) The methods given in EN 1999-1-2 are applicable to the following aluminium alloys: EN AW-3004 - H34 EN AW-5083 - O and H12 EN AW-6063 - T5 and T6 EN AW-5005 - O and H34 EN AW-5454 - O and H34 EN AW-6082 - T4 and T6 EN AW-5052 - H34 EN AW-6061 - T6 (6) The methods given in EN 1999-1-2 are applicable also to other aluminium alloy/tempers of EN 1999 1-1, if reliable material properties at elevated temperatures are available or the simplified assumptions in 5.2.1 are applied. 1.2 Assumptions (1) In addition to the general assumptions of EN 1990, the following assumptions apply: - the choice of the relevant design fire scenario is made by appropriate qualified and experienced personnel, or is given by the relevant national regulation. - any active and passive fire protection systems taken into account in the design will be adequately maintained. (2) For the design of new structures, EN 1999 is intended to be used, for direct application, together with EN 1990, EN 1991, EN 1992, EN 1993, EN 1994, EN 1995, EN 1997, EN 1998 and EN 1999. (3) EN 1999 is intended to be used in conjunction with: - European Standards for construction products relevant for aluminium structures - EN 1090-1, Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components - EN 1090-3, Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
符合欧洲排放标准的中国6a将于2020年生效,另外一项标准将于2023年生效。该标准将根据WLTP进行验证,目标是将二氧化碳排放量减少90%以上。同样,美国有75%的一氧化碳污染归因于机动车,环境保护署于2020年1月宣布,它正在制定新的规则以减少车辆的排放,并遵循全球榜样,使汽车更轻。 因此,汽车行业及其供应链需要合作,为该行业提供材料创新,使汽车变得更轻。...
抗压强度的测定GB/T 14201-19932019/2/1147GB/T 14986.1-2018软磁合金 第1部分:一般要求部分代替:GB/T 14986-20082019/2/1148GB/T 14986.5-2018软磁合金 第5部分:铁铝合金GB/T 14986-2008,部分代替:GB/T 14986-20082019/2/1149GB/T 15711-2018钢中非金属夹杂物的检验 塔形发纹酸浸法...
2018-02-01 224 GB/T 33941.1-2017 土方机械 结构件应力测试方法 第1部分:通则 2018-02-01 225 GB/T 33941.2-2017 土方机械 结构件应力测试方法 第2部分:轮胎式装载机机架 2018-02-01 226 GB/T 33942-2017 特种设备事故应急预案编制导则 2018-02-01 227 GB/T 33943-2017...
详见http://www.anytesting.com/news/1005197.html(链接请点击文末“阅读原文”,下同) 《新能源动力电池壳及盖用铝及铝合金板、带材》国家标准发布12月1实施国家质检总局、国家标准委发布了动力电池结构件的标准——《新能源动力电池壳及盖用铝及铝合金板、带材》(GB/T33824-2017),标准中对动力电池用铝材的化学成分、尺寸偏差、力学性能、外观质量、检验规则以及包装运输等都做出了详细的规定...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号