61000-3-2-2005
Compatibilite electromagnetique (CEM) . Partie 3-2: Limites . Limites pour les emissions de courant harmonique (courant appele par les appareils .16 A par phase) (Edition 3.0)

Electromagnetic compatibility (EMC) . Part 3-2: Limits . Limits for harmonic current emissions (equipment input current .16 A per phase) (Edition 3.0)


61000-3-2-2005 发布历史

This part of IEC 61000 deals with the limitation of harmonic currents injected into the public supply system.It specifies limits of harmonic components of the input current which may be produced by equipment tested under specified conditions.Harmonic components are measured according to Annexes A and B.This part of IEC 61000 is applicable to electrical and electronic equipment having an input current up to and including 16 A per phase@ and intended to be connected to public low-voltage distribution systems.Arc welding equipment which is not professional equipment@ with input current up to and including 16 A per phase@ is included in this standard.Arc welding equipment intended for professional use@ as specified in IEC 60974-1@ is excluded from this standard and may be subject to installation restrictions as indicated in IEC 61000-3-4 or IEC 61000-3-12.The tests according to this standard are type tests. Test conditions for particular equipment are given in Annex C.For systems with nominal voltages less than 220 V (line-to-neutral)@ the limits have not yet been considered.NOTE The words apparatus@ appliance@ device and equipment are used throughout this standard. They have the same meaning for the purpose of this standard.

61000-3-2-2005由IEC - International Electrotechnical Commission 发布于 2005-11-01,并于 2009-04-22 实施。

61000-3-2-2005的历代版本如下:

  • 1995年01月01日 61000-3-2-1995 Compatibilité électromagnétique (CEM) - Partie 3: Limites - Section 2: Limites pour les émissions de courant harmonique (courant appelé par les appareils I 16 A par phase) (Edition 1.0; Corrigendum-1995; CENELEC EN 61 000-3-2: 1995)
  • 1998年04月01日 61000-3-2-1998 Compatibilite Electromagnetique (CEM) - Partie 3-2: Limites - Limites Pour Les Emissions De Courant Harmonique (Courant Appele Par Les Appareils <16 A Par Phase) (Edition 1.2; Edition 1.0: 1995 Consolidated with Amendments 1: 1997 and 2: 1998; Replaces IE
  • 2000年08月01日 61000-3-2-2000 Compatibilite Electromagnetique (CEM) - Partie 3-2: Limites - Limites Pour Les Emissions De Courant Harmonique (Courant Appele Par Les Appareils <=16 A Par Phase) (Edition 2.0)
  • 2001年10月01日 61000-3-2-2001 Electromagnetic Compatibility (EMC) - Part 3-2: Limits - Limits for Harmonic Current Emissions (Equipment Input Current Less Than or Equal to 16 A per Phase) (Edition 2.1; Edition 2.0:2000 Consolidated with Amendment 1:2001)
  • 2004年11月01日 61000-3-2-2004 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= A per phase) (Edition 2.2; Edition 2.0:2000 consolidated with amendments 1:2001 and 2:2004)
  • 2005年11月01日 61000-3-2-2005 Compatibilite electromagnetique (CEM) . Partie 3-2: Limites . Limites pour les emissions de courant harmonique (courant appele par les appareils .16 A par phase) (Edition 3.0)
  • 2009年04月01日 61000-3-2-2009 Compatibilité électromagnétique (CEM) – Partie 3-2: Limites – Limites pour les émissions de courant harmonique (courant appelé par les appareils Less than or equal to 16 A par phase) (Edition 3.2; Consolidated Reprint)
  • 2014年05月01日 61000-3-2-2014 Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) (Edition 4.0)

 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 61000-3-2-2005 前三页,或者稍后再访问。

点击下载后,生成下载文件时间比较长,请耐心等待......

 



标准号
61000-3-2-2005
发布日期
2005年11月01日
实施日期
2009年04月22日
废止日期
中国标准分类号
/
国际标准分类号
/
发布单位
IEC - International Electrotechnical Commission
引用标准
66
适用范围
This part of IEC 61000 deals with the limitation of harmonic currents injected into the public supply system.It specifies limits of harmonic components of the input current which may be produced by equipment tested under specified conditions.Harmonic components are measured according to Annexes A and B.This part of IEC 61000 is applicable to electrical and electronic equipment having an input current up to and including 16 A per phase@ and intended to be connected to public low-voltage distribution systems.Arc welding equipment which is not professional equipment@ with input current up to and including 16 A per phase@ is included in this standard.Arc welding equipment intended for professional use@ as specified in IEC 60974-1@ is excluded from this standard and may be subject to installation restrictions as indicated in IEC 61000-3-4 or IEC 61000-3-12.The tests according to this standard are type tests. Test conditions for particular equipment are given in Annex C.For systems with nominal voltages less than 220 V (line-to-neutral)@ the limits have not yet been considered.NOTE The words apparatus@ appliance@ device and equipment are used throughout this standard. They have the same meaning for the purpose of this standard.




Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号