IEC 60695-2-12-2010
Essais relatifs aux risques du feu – Partie 2-12: Essais au fil incandescent/chauffant – Méthode d'essai d'indice d’inflammabilité au fil incandescent (GWFI) pour matériaux (Edition 2.0)

Fire hazard testing – Part 2-12: Glowing/hot-wire based test methods – Glow-wire flammability index (GWFI) test method for materials (Edition 2.0)


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 IEC 60695-2-12-2010 前三页,或者稍后再访问。

如果您需要购买此标准的全文,请联系:

点击下载后,生成下载文件时间比较长,请耐心等待......

 

标准号
IEC 60695-2-12-2010
发布日期
2010年10月01日
实施日期
2014年02月14日
废止日期
中国标准分类号
/
国际标准分类号
/
发布单位
IEC - International Electrotechnical Commission
引用标准
30
适用范围
This part of IEC 60695 specifies the details of the glow-wire test to be applied to test specimens of solid electrical insulating materials or other solid materials for flammability testing to determine the glow-wire flammability index (GWFI). GWFI is the highest temperature@ determined during this standardized procedure@ at which the tested material a) does not ignite or@ if it does@ extinguishes within 30 s after removal of the glow-wire and is not totally consumed@ and b) molten drips@ if they occur@ do not ignite the wrapping tissue. This test method is a materials test carried out on a series of standard test specimens. The data obtained@ along with data from the glow-wire ignition temperature (GWIT) test method for materials@ IEC 60695-2-13@ can then be used in a preselection process in accordance with IEC 60695-1-30 to judge the ability of materials to meet the requirements of IEC 60695-2-11. NOTE As an outcome of conducting a fire hazard assessment@ an appropriate series of preselection flammability and ignition tests may allow a reduction of end product testing. This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is@ wherever applicable@ to make use of basic safety publications in the preparation of its publications. The requirements@ test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications.

IEC 60695-2-12-2010相似标准


推荐


IEC 60695-2-12-2010系列标准

IEC 60695-1-1-1999 着火危险试验 第1-1部分:电工产品着火危险评定指南 通用指南 IEC 60695-1-10 (REDLINE + STANDARD)-2016 IEC 60695-1-10-2016 RLV 着火危险试验.第1-10部分:电工产品着火危险评估指南.一般指南 IEC 60695-1-11-2014 火灾隐患试验.第1-10部分:电工产品的火灾隐患评估指南.火灾隐患评估 IEC 60695-1-12-2015 IEC 60695-1-2-1982 着火危险试验 第1部分:为评定电工产品着火危险起草的要求和试验规范指南 第2节:电子元件的指南 IEC 60695-1-20-2016 火灾试验.第1-20部分:电工产品的火灾评估用指南.易燃性.通用指南 IEC 60695-1-21-2016 火灾危害测试 - 第1-21部分:评估电子产品火灾危险的指导意见 - 可燃性 - 测试方法的总结和相关性 IEC 60695-1-3-1986 着火危险试验.第1部分:电工产品着火危险评定技术要求和试验规范制订指南.第3节:预选规程的使用指南 IEC 60695-1-30-2017 着火危险试验.第1-30部分:电工制品的着火危险评估指南.预选试验规程.通用指南 IEC 60695-1-40-2013 着火危险试验.第1-40部分:电工制品的着火危险评估指南.绝缘液体 IEC 60695-10-2 CORR 1-2006 着火危险试验.第10-2部分:异常热.球压试验.勘误1 IEC 60695-10-2-2014/6250 火灾危险测试 - 第10-2部分:异常热球压力测试方法 IEC 60695-10-3-2016 着火危险试验.第10-3部分:非正常热.模压应力释放变形试验 IEC 60695-11-10 AMD 1-2003 IEC 60695-11-10 CORR 1-2014 火灾危险试验.第2-13部分:基于灼热/热线的试验方法 -材料的辉光丝点火温度(GWIT)试验方法 IEC 60695-11-10 Corrigendum 1-2014 着火危险试验. 第11-10部分: 试验火焰. 50 W水平和垂直火焰的试验方法; 勘误表1 IEC 60695-11-10 Edition 1.1-2003 着火危险试验.第11-10部分:试验火焰:50W水平和垂直火焰的试验方法 IEC 60695-11-10-2013 着火危险试验.第11-10部分:试验火焰.50 W水平及垂直火焰试验法 IEC 60695-11-10-1999/Amd 1-2003 火灾危险试验第11-10部分:试验火焰50W水平和垂直火焰试验方法修改1 IEC 60695-11-11-2021 火灾测试. 第11-11部分: 试验火焰. 从非接触火源点燃的特性热流量的测量 IEC 60695-11-2 (REDLINE + STANDARD)-2017 IEC 60695-11-2 CORR 1-2006 着火危险试验.第11-2部分:试验火焰.1KW标称预混合型火焰.设备、验证试验方法和指南.勘误1 IEC 60695-11-2-2017 RLV 火灾危险试验.第11-2部分:试验火焰.1kW预混合火焰.装置 确认性试验安排和指南 IEC 60695-11-20 AMD 1-2003 IEC 60695-11-20 CORR 1-2016 Essais relatifs aux risques du feu Partie 11-20: Flammes d essai Méthodes d essai à la flamme de 500 W (Edition 2.0) IEC 60695-11-20 Corrigendum 1-2000 着火危险试验.第11-20部分:试验火焰:500W火焰试验方法 IEC 60695-11-20 Edition 1.1-2003 着火危险试验.第11-20部分:试验火焰:500W火焰试验方法 IEC 60695-11-20-2015 着火危险试验.第11-20部分:试验火焰:500W火焰试验方法 IEC 60695-11-20-1999/Amd 1-2003 火灾危险试验第11-20部分:试验火焰500W火焰试验方法修改1 IEC 60695-11-20-1999/AMD1-2003 修改件1.火灾危险试验.第11-20部分:试验火焰.500W火焰试验方法 IEC 60695-11-3-2012 着火危险试验.第11-3部分:试验火焰.500 W火焰.仪器和验证试验方法 IEC 60695-11-4-2011 着火危险试验.第11-4部分:利用50 W火焰装置确认检测法进行的火焰试验 IEC 60695-11-5 (REDLINE + STANDARD)-2016 IEC 60695-11-5-2016 RLV 火灾危险试验.第11-5部分:试验火焰.针状火焰试验方法.仪器 验证性试验安排和指南 IEC 60695-2-1-1991 着火危险试验.第2部分:试验方法.第1节:灼热金属线试验和导则 IEC 60695-2-10-2021 RLV 火灾危险试验.第2-10部分:基于灼热/热丝的试验方法.灼热丝装置和通用试验程序 IEC 60695-2-11 (REDLINE + STANDARD)-2014 IEC 60695-2-11 CORR-2001 Essais Relatifs Aux Risques Du Feu - Partie 2-11: Essais Au Fil Incandescent/Chauffant - Methode D'Essai D'Inflammabilite Pour Produits Finis (Edition 1.0) IEC 60695-2-11-2021 RLV 火灾危险试验.第2-11部分:基于灼热/热丝的试验方法.最终产品的灼热丝可燃性试验方法(GWEPT) IEC 60695-2-12 AMD 1-2014 着火危险试验. 第2-12部分: 基于灼热/发热丝的试验方法. 材料的灼热丝可燃性指数 (GWFI) 试验方法 IEC 60695-2-12 Edition 2.0-2010 着火危险试验.第2-12部分:灼热金属丝/热丝的试验方法.灼热金属丝可燃性(灼热金属丝可燃性)材料的试验方法 IEC 60695-2-12 Edition 2.1-2014 着火危险试验. 第2-12部分: 基于灼热/发热丝的试验方法. 材料的灼热丝可燃性指数 (GWFI) 试验方法 IEC 60695-2-13 AMD 1-2014 着火危险试验. 第2-13部分: 基于灼热/发热丝的试验方法. 材料的灼热丝燃点温度 (GWIT) 试验方法 IEC 60695-2-13 CORR 1-2012 火灾危险测试 第2-13部分:基于灼热/发热丝的测试方法.材料的灼热丝起燃温度的测试;勘误表1 IEC 60695-2-13 Corrigendum 1-2012 火灾危险测试 第2-13部分:基于灼热/发热丝的测试方法.材料的灼热丝起燃温度的测试;勘误表1 IEC 60695-2-13 Edition 2.0-2010 着火危险试验.第2-13部分:灼热金属丝/热丝的试验方法.灼热金属丝点火性(GMIT)材料的试验方法 IEC 60695-2-13 Edition 2.1-2014 着火危险试验. 第2-13部分: 基于灼热丝/发热丝的试验方法. 材料的灼热丝引燃温度(GWIT)试验方法 IEC 60695-2-13-2021 RLV 火灾危险试验.第2-13部分:基于灼热/热线的试验方法.材料的灼热线点火温度(GWIT)试验方法 IEC 60695-2-13-2010/AMD1-2014 修改件1.火灾危险试验.第2-13部分:基于灼热/热丝的试验方法.材料的灼热丝点火温度(GWIT)试验方法 IEC 60695-2-2 AMD 1-1994 Amendement 1 Essais relatifs aux risques du feu - Partie 2: Méthodes d’essai - Section 2 - Essai au br?leur-aiguille (Edition 2.0) IEC 60695-2-2-1991 着火危险试验 第2部分:试验方法 第2节:针焰试验 IEC 60695-2-20-1995 Essais relatifs aux risques du feu - Partie 2: Méthodes d’essai à fil chauffant ou incandescent - Section 20: Essai d’allumabilité par une bobine de fil chauffant sur matériaux (Edition 1.0) IEC 60695-2-4/0-1991 着火危险试验 第2部分:试验方法 第4节/活页0:扩散型和预混合型火焰试验方法 IEC 60695-3-1-1982 着火危险试验 第3部分:着火危险评定程序和结果说明的例子 第1节:燃烧特性及其测定的试验方法综述 IEC 60695-4-2021 RLV 着火危险试验第4部分:电工产品着火试验术语 IEC 60695-5-1-2021 RLV 火灾危险试验.第5-1部分:火灾流出物的腐蚀损伤效应.一般指南 IEC 60695-5-2-1994 Essais Relatifs Aux Risques Du Feu - Partie 5: Evaluation des dommages potentiels de corrosion provoqués par des effluents du feu - Section 2: Principes de sélection et d'utilisation des méthodes d'essai (Edition 1.0) IEC 60695-6-1 AMD 1-2010 火灾隐患试验.第6-1部分:烟雾灰暗度.一般指南 IEC 60695-6-1 Edition 2.1-2010 火灾隐患试验.第6-1部分:烟雾灰暗度.一般导则 IEC 60695-6-1-2021 RLV 火灾危险试验第6-1部分:烟雾遮蔽一般指南 IEC 60695-6-1-2005/AMD1-2010 修改件1.火灾危险试验.第6-1部分:烟雾遮蔽.一般指南 IEC 60695-6-2-2018 火灾危害测试 - 第6-2部分:烟雾遮蔽 - 测试方法的总结和相关性 IEC 60695-6-31-1999 着火危险试验.第6-31部分:烟雾模糊.小范围静态试验.材料 IEC 60695-7-1-2010 火灾隐患试验.第7-1部分:燃烧废物毒性.一般指南 IEC 60695-7-2-2021 着火危险试验. 第7-2部分: 火灾气流毒性测试方法的概要和相关性原则 IEC 60695-7-3-2011 着火危险试验.第7-3部分:火灾气流毒性试验结果的使用和解释 IEC 60695-8-1-2016 着火危险试验.第8-1部分:放热.一般指南 IEC 60695-8-2-2016 火灾测试.第8-2部分:放热.试验方法的摘要及有关问题 IEC 60695-9-1-2013 着火危险试验.第9-1部分:火焰的表面扩展.通用指南 IEC 60695-9-2-2021 着火危险试验. 第9-2部分: 表面火焰蔓延. 试验方法总结及相关

谁引用了IEC 60695-2-12-2010 更多引用





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号