ASTM A500/A500M-23
圆形和形状的冷成型焊接和无缝碳钢结构管

Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

ASTM A500/A500M-23 发布历史

ASTM A500/A500M-23由美国材料与试验协会 US-ASTM 发布于 2023-11-01。

ASTM A500/A500M-23在国际标准分类中归属于: 23.040.40 金属配件。

ASTM A500/A500M-23 圆形和形状的冷成型焊接和无缝碳钢结构管的最新版本是哪一版？

最新版本是 ASTM A500/A500M-23 。

ASTM A500/A500M-23 发布之时，引用了标准

• ASTM A370 钢铁产品机械试验的标准试验方法和定义
• ASTM A700 国内装运钢制品的包装、标记和装载方法的标准实施规范
• ASTM A751 钢铁产品化学分析的标准测试方法 实践和术语
• ASTM A941 钢、不锈钢、相关合金和铁合金的相关标准术语*， 2024-03-01 更新

* 在 ASTM A500/A500M-23 发布之后有更新，请注意新发布标准的变化。

ASTM A500/A500M-23的历代版本如下：

• 2023年 ASTM A500/A500M-23 圆形和形状的冷成型焊接和无缝碳钢结构管
• 2021年 ASTM A500/A500M-21a 圆形和异型冷成型焊接和无缝碳钢结构管的标准规范
• 2021年 ASTM A500/A500M-21 圆形和异型冷成型焊接和无缝碳钢结构管的标准规范
• 2020年 ASTM A500/A500M-20 圆形和形状中冷成型焊接和无缝碳钢结构管的标准规范
• 2018年 ASTM A500/A500M-18 圆形和形状中冷成型焊接和无缝碳钢结构管的标准规范
• 2013年 ASTM A500/A500M-13 圆形与异型冷成型焊接与无缝碳素钢结构管的标准规格
• 2010年 ASTM A500/A500M-10a 圆形与异型冷成型焊接与无缝碳素钢结构管标准规格
• 2010年 ASTM A500/A500M-10 圆形与异型冷成型焊接与无缝碳素钢结构管标准规范
• 2009年 ASTM A500/A500M-09 圆形和异型冷成型焊接和无缝碳钢结构管的标准规范
• 2007年 ASTM A500/A500M-07 圆形和异型冷成型焊接和无缝碳钢结构管的标准规范
• 2003年 ASTM A500-03a 圆形和其他形状的冷成型焊接和无缝碳钢结构管件标准规范
• 2003年 ASTM A500-03 圆形和其他形状冷成型焊接和无缝碳钢结构管件标准规范
• 2001年 ASTM A500-01a 圆形与异型冷成型焊接与无缝碳素钢结构管标准规范
• 2001年 ASTM A500-01 圆形与异型冷成型焊接与无缝碳素钢结构管标准规范
• 2001年 ASTM A500-99 圆形和形状中冷成型焊接和无缝碳钢结构管的标准规范
• 1978年 ASTM A500-78 圆形和形状中冷成型焊接和无缝碳钢结构管的标准规范

1.1 This specification covers cold-formed welded and seamless carbon steel round, square, rectangular, or special structural tubular shapes for welded, riveted, or bolted construction of bridges and buildings, and for general structural purposes. 1.2 This tubing is produced in both welded and seamless sizes with a periphery of 88 in. [2235 mm] or less, and a specified wall thickness of 1.000 in. [25.4 mm] or less. Grade D requires heat treatment. NOTE 1—Products manufactured to this specification may not be suitable for those applications such as dynamically loaded elements in welded structures, etc., where low-temperature notch-toughness properties, which are typically measured by Charpy Impact testing, may be important. There are other ASTM standards that do have CVN requirements and may be more suitable for those applications. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. 1.4 The text of this specification contains notes and footnotes that provide explanatory material. Such notes and footnotes, excluding those in tables and figures, do not contain any mandatory requirements. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

标准号

ASTM A500/A500M-23

发布

2023年

发布单位

美国材料与试验协会

当前最新

ASTM A500/A500M-23

 

 

引用标准

ASTM A370 ASTM A700 ASTM A751 ASTM A941 MIL-STD-129 MIL-STD-163

ASTM A500/A500M-23相似标准

推荐

谁引用了ASTM A500/A500M-23 更多引用