AMS4037Q-2014

Aluminum Alloy@ Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024; -T3 Flat Sheet@ -T351 Plate) Solution Heat Treated (UNS A92024)

AMS4037Q-2014 发布历史

Form This specification covers an aluminum alloy in the form of sheet and plate from 0.008 to 4.000 inches (0.20 to 101.60 mm) in thickness@ inclusive (See 8.4). Application These products have been used typically for formed structural parts of good strength. Plate is also suitable for structural machined parts where warpage@ during machining@ due to residual stresses must be minimized@ but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP823 recommends practices to minimize such conditions.

AMS4037Q-2014由SAE - SAE International 发布于 2014-12-01，并于 2014-12-31 实施。

AMS4037Q-2014的历代版本如下：

• 2014年12月01日 AMS4037Q-2014

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 AMS4037Q-2014 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

AMS4037Q-2014

发布日期

2014年12月01日

实施日期

2014年12月31日

废止日期

无

中国标准分类号

/

国际标准分类号

/

发布单位

SAE - SAE International

引用标准

5

适用范围

Form This specification covers an aluminum alloy in the form of sheet and plate from 0.008 to 4.000 inches (0.20 to 101.60 mm) in thickness@ inclusive (See 8.4). Application These products have been used typically for formed structural parts of good strength. Plate is also suitable for structural machined parts where warpage@ during machining@ due to residual stresses must be minimized@ but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP823 recommends practices to minimize such conditions.