GSO EN 13035-1:2011由GSO 发布于 2011-10-12。
GSO EN 13035-1:2011在国际标准分类中归属于: 81.100 玻璃和陶瓷生产设备。
GSO EN 13035-1:2011 平板玻璃制造、装卸和装卸设备和工厂 安全要求 第1部分:工厂内的储存、装卸和运输设备的最新版本是哪一版?
最新版本是 GSO EN 13035-1:2011 。
1.1 This standard contains the requirements for safety for the design and installation of equipment intended for the storage, handling and transportation of flat glass inside the factory as described in Clause 3. It applies to stationary, movable and mobile storage equipment (see 3.2), mechanical and automatic handling equipment (see 3.3) and transportation equipment (see 3.4) (see overview in Annex A). 1.2 Additional requirements for dealing with specific hazards due to the use outside the factory are dealt with in prEN 13035-2. 1.3 This standard only deals with the devices which are directly in contact with the glass. Tractors, cranes, hoists and fork lifts are out of the scope as well as parts of other powered vehicles that are not in contact with the glass (see 3.4.1). This standard does not apply to manual handling equipment as defined in 3.3.1. 1.4 This standard deals with all significant hazards, hazardous situations and events relevant to equipment for the storage, handling and transportation of flat glass, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, the operation and maintenance. Noise has not been considered to be a significant hazard for any type of equipment in the scope of this standard. 1.5 This document is not applicable to storage, handling or transportation equipment for flat glass inside the factory, which is manufactured before the date of its publication as EN.
(二)为了指导工业企业无组织排放整治工作,现对部分行业提出具体要求,其他行业参照执行 1.煤电行业 (1)原辅料装卸、贮存、运输、制备系统 a.火车或汽车卸煤的,翻车机室或卸煤沟应采用封闭或半封闭型式,并采取喷淋等抑尘措施; b.储煤场应采用筒仓,条形或圆形等全封闭型式,堆场地面实施硬化,并配置自动喷淋装置; c.厂区道路和与主要道路的连接线、运煤专用线应硬化,每天定期机械化清扫、洒水,保持清洁...
5•3 储存场所的电气安装5•3•1 化学危险品储存建筑物、场所消防用电设备应能充分满足消防用电的需要;并符合GB J 16第十章第一节的有关规定。5•3•2 化学危险品储存区域或建筑物内输配电线路、灯具、火灾事故照明和疏散指示标志,都应符合安全要求。5•3•3 贮存易燃、易爆化学危险品的建筑,必须安装避雷设备。...
对油温变化比较敏感(感觉敏锐),液压元件制造精度要求较高,造价昂贵,出现故障不易找到原因,但在实际的应用中,可以通过有效的措施来减小不利因素带来的影响。在工厂生产中,经常会用到升降式超净工作(gōng zuò)台。例如,在铸造、焊接、喷涂、搬运、装配等工作场合就有各种升降式超净工作台被用作输送和定位的工具。...
第十五部分:法规信息 法规信息 化学危险物品安全管理条例 (1987年2月17日国务院发布),化学危险物品安全管理条例实施细则 (化劳发[1992] 677号),工作场所安全使用化学品规定 ([1996]劳部发423号)等法规,针对化学危险品的安全使用、生产、储存、运输、装卸等方面均作了相应规定;常用危险化学品的分类及标志 (GB 13690-92)将该物质划为第5.1 类氧化剂。...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号