EN 15001-1:2023由欧洲标准化委员会 IX-CEN 发布于 2023-02-22，并于 2023-05-31 实施，于 2023-08-31 废止。
EN 15001-1:2023在国际标准分类中归属于: 23.040.01 管道部件和管道综合。
EN 15001-1:2023 天然气基础设施.工业设施大于0-5巴,工业和非工业设施大于5巴工作压力的天然气装置管道.第1部分:设计的详细功能要求的最新版本是哪一版？
最新版本是 EN 15001-1:2023 。
This European Standard specifies detailed functional requirements for the design, selection of materials, construction, inspection and testing of: - industrial gas installation pipework and assemblies with an operating pressure greater than 0,5 bar; and - non-industrial gas installation pipework (residential and commercial) with an operating pressure greater than 5 bar in buildings; starting from the outlet of the network operator’s point of delivery up to the inlet connection to the gas appliance; normally the inlet isolation valve. This standard also covers the pipework to the inlet connection of a gas appliance that is not included within the scope of the appliance standard. NOTE 1 The use of the term installation and pipework is interchangeable. Apart from the exceptions stated below, this standard applies to gas installations operating at ambient temperatures between −20 °C and 40 °C and operating pressures up to and including 60 bar. For operating conditions outside these limitations, reference should additionally be made to EN 13480 (all parts) for metallic pipework. For industrial gas installations up to and including 0,5 bar and for non-industrial (residential and commercial) gas installations up to and including 5 bar in buildings, EN 1775 applies. For gas installations that do not fall within the scope of EN 1775 or other European Standards, this standard applies. In this European Standard, the term “gas“ refers to combustible gases, which are gaseous at 15 °C and 1 013 mbar absolute atmospheric pressure (normal conditions). These gases are commonly referred to as manufactured gas, natural gas or Liquefied Petroleum Gas (LPG). They are also referred to as first, second or third family gases as classified in EN 437:2003+A1:2009, Table 1. The given values are considered as normal conditions for all volumes given in this standard. This European Standard is applicable to installation pipework for the carriage of: - processed, non-toxic and non-corrosive natural gas according to EN 437:2003+A1:2009 and EN 16726 "Gas infrastructure - Quality of gas - Group H"; - vaporized LPG; - biomethane, complying with EN 16723 1; - vaporized LNG. NOTE 2 The specification of vaporized LNG is equal to that of natural gas as classified in EN 437:2003+A1:2009. This European Standard does not cover pipework for hydrogen rich gases that fall outside the definitions within EN 437:2003+A1:2009. LPG storage vessels (including all ancillaries fitted directly to storage vessels) are excluded. Also excluded are LPG installations and sections of LPG installations operating at vapour pressure in the liquid state (e.g. between the storage vessel and any pressure regulator). In this standard, all pressures are gauge pressures unless otherwise stated. This standard has been harmonized to address the essential safety requirements of the Pressure Equipment Directive (PED, 2014/68/EU [formerly 97/23/EC]) relevant for the joining of gas installation pipework (assemblies) falling within the scope of the PED. These are listed in Annex ZA. However, "this Directive does not cover the assembly of pressure equipment on the site and under the responsibility of the user, as in the case of industrial installations" (PED, Preamble, 7th recital, last paragraph). Although in this respect, the standard takes into account the essential safety requirements of the PED, no inference can be drawn from this as to whether or not the installation or parts of the installation falls within the scope of the PED. Reference should therefore be made to the PED and relevant national legislation. This European Standard specifies common basic principles for gas supply systems. Users of this European Standard should be aware (...)
①《压力管道规范 工业管道 第6部分：安全防护》（GB/T 20801.6-2020）规定：下列设备和管道系统应设置阻火器：（1）可燃液体常压储罐，以液态烃、LNG等低温储罐的通气口和呼吸阀进、出口及其气相连通管；（2）火炬、焚烧炉、氧化炉等燃烧入口；（3）有持续点燃源和0区的风机、真空泵、压缩机等机械设备进、出口；（4）装卸可燃液体或气体终端站、槽船和槽罐车的呼吸阀、以及气体总管；（5）沼气系统、...
法兰（钢制锻造法兰）钢制锻造法兰，不分级需要制造许可的元件组合装置燃气调压装置、减温减压装置、流量计（壳体）、锅炉范围内管道和长输油气管道使用的工厂化预制管段。注：1.元件组合装置是指由管子、管件、阀门、法兰、补偿器、密封元件等压力管道元件组合（焊接、法兰连接等）在一起具备某种功能的装置，包括井口装置和采油树、节流压井管汇、燃气调压装置、减温减压装置、阻火器、流量计（壳体）、工厂化预制管段。...
3.2.8 位于工业洁净室直接上方的屋面应满足防水、保温要求，防水等级不应低于Ⅰ级。3.2.9工业洁净室的结构设计除满足承载力、变形要求外，有防微振要求的区域应进行防微振设计。3.2.10 对工业洁净室生产或实验有振动影响的工艺设备、动力设备及管线，应采取减振措施。3.2.11 工业洁净室内精密设备及仪器采用隔振装置时，隔振装置的外露部分应根据洁净度等级采取相应的防护措施。...
“中巴经济走廊”铁路干线升级和陆港建设规划已经启动1号铁路干线是巴基斯坦最重要的南北铁路干线，从卡拉奇向北经拉合尔、伊斯兰堡至白沙瓦，全长1726公里。哈维连站是巴基斯坦铁路网北端尽头，规划建设由此向北延伸、经中巴边境口岸红其拉甫至喀什的铁路。哈维连拟建成主要办理集装箱业务的陆港。1号铁路干线升级和哈维连陆港建设，是“中巴经济走廊”交通基础设施优先推进项目，预计建设时间5到7年。...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证：京ICP证110310号