ASTM D4029/D4029M-23
成品机织玻璃织物的标准规范

Standard Specification for Finished Woven Glass Fabrics


ASTM D4029/D4029M-23 发布历史

ASTM D4029/D4029M-23由美国材料与试验协会 US-ASTM 发布于 2023-06-01。

ASTM D4029/D4029M-23在国际标准分类中归属于: 59.100.10 纺织玻璃纤维材料。

ASTM D4029/D4029M-23 成品机织玻璃织物的标准规范的最新版本是哪一版?

最新版本是 ASTM D4029/D4029M-23

ASTM D4029/D4029M-23 发布之时,引用了标准

* 在 ASTM D4029/D4029M-23 发布之后有更新,请注意新发布标准的变化。

ASTM D4029/D4029M-23的历代版本如下:

 

1.1 This specification covers finished fabrics woven from “E” electrical glass fiber yarns that are intended as a reinforcing material in laminated plastics for structural use. This specification can also be applied to fabrics made of other glass types as agreed upon between the purchaser and the supplier. 1.2 This specification specifies the terminology, definitions, general requirements, and physical requirements for finished woven glass fabrics This specification permits the application of sizing materials to the glass fiber yarn during manufacture that helps facilitate weaving. These organic materials are typically removed from the greige fabric and replaced with a finish that is compatible with the resin matrix specified in the contracting document. NOTE 1—Sizing materials on glass fiber yarns, in most cases, are removed by various cleaning procedures as a first stage in preparing a finished fabric. When these yarn sizing materials are removed during a cleaning procedure they need not be compatible with the subsequent resin matrix. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems will result in non-conformance with the standard. 1.4 This specification is one of a series to provide a substitute for Military Specifications: MIL-Y-1140 Yarn, Cord, Sleeving, Cloth, and Tape-Glass; and MIL-C-9084 Cloth, Glass Finished for Resin Laminates. 1.5 Additional ASTM specifications in this series have been drafted and appear in current editions of the Annual Book of ASTM Standards. These include greige glass fabrics, glass tapes, glass sleevings, glass cords, glass sewing threads, and finished laminates made from finished glass fabrics. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.


ASTM D4029/D4029M-23相似标准


推荐

纺织品厚度测试方法

1.序言本标准规定了纺织玻璃纤维机织物厚度测定方法。本标准等效采用国际标准ISO 4603-1978《纺织玻璃纤维---机织物---厚度测定》。2.定义纺织玻璃纤维机织物厚度:在规定测试条件下,测得织物表面之间以毫米表示垂直距离。3.原理试样置放在厚度仪测座上,测柱匀速度下降对试样施加规定压力,通过测量测座平面与测柱平面之间董直距离测得机织物试样厚度。...

江苏常熟检验检疫局制定机织物标准通过审定

  从江苏常熟检验检疫局获悉,在近日召开检验检疫纺织标准化专业委工作会议暨检验检疫行业标准审定会上,由该局承担《进出口纺织织物检验规程 第1部分:机织物》顺利通过了审定。   该标准是常熟局历时一年时间,在广泛收集国内外相关技术规范和标准,全面总结近年来进出口轻纺产品检验监管经验,认真听取机织物生产企业和检验检测机构意见基础上,按计划制定。...

透气性是纺织品织物透过空气性能

JW-TQ-500型透气量仪用于测试多种纺织织物,包括产业用织物,非织造布和其它可透气纺织制品,产业用纺织品、面料、针织物机织物(包括紧密涂层织物)、无纺布、高透气纸张,造纸毛毡,玻璃纤维,工业滤布(滤纸)等多种材料透气性,进行快速、精准地测试。适用标准:GB/T5453  纺织品 织物透气性测定(中国标准)...

65项纺织、黑色冶金、制药行业检测标准公布

标准适用于各类棉及化纤纯纺、混纺机织物、针织物和非织造布热熔粘合衬进行各种试验时组合试样制作,其他类似粘合衬也可参照采用。 2010-10-1    9      FZ/T 64007-2010 机织树脂衬 本标准规定了机织树脂衬产品分类、技术要求、试验方法、检验规则及包装和标志。本标准适用于鉴定各种材质本白、漂白和染色机织树脂衬品质。...


谁引用了ASTM D4029/D4029M-23 更多引用





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号