ASTM A336/A336M-23
压力和高温部件用合金钢锻件标准规范
Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
ASTM A336/A336M-23 发布历史
ASTM A336/A336M-23由美国材料与试验协会 US-ASTM 发布于 2023-11-01。
ASTM A336/A336M-23在国际标准分类中归属于: 77.140.85 钢铁锻件。
ASTM A336/A336M-23 压力和高温部件用合金钢锻件标准规范的最新版本是哪一版？
最新版本是 ASTM A336/A336M-23 。
ASTM A336/A336M-23 发布之时，引用了标准
- ASTM A275/A275M 钢锻件磁粉检验的标准试验方法
- ASTM A335/A335M 高温用无缝铁素体合金钢管标准规范
- ASTM A370 钢铁产品机械试验的标准试验方法和定义
- ASTM A788/A788M 钢锻件标准规范，一般要求
- ASTM A965/A965M 压力和高温部件用奥氏体钢锻件标准规范*， 2024-05-01 更新
- ASTM E165/E165M 一般工业液体渗透检测的标准实施规程
- ASTM F6 二氧化锗体积密度的试验方法
- ASTM F9 电子管中用作栅极侧杆的圆导线规范
- ASTM F91 用冷凝核探测器对层流无菌室及无菌工作站配备的过滤器进行检漏试验
- ASTM F911 跑鞋柔韧性的标准测试方法（2002 年撤回）
* 在 ASTM A336/A336M-23 发布之后有更新，请注意新发布标准的变化。
ASTM A336/A336M-23的历代版本如下：
- 2023年 ASTM A336/A336M-23 压力和高温部件用合金钢锻件标准规范
- 2021年 ASTM A336/A336M-21 压力和高温部件用合金钢锻件的标准规范
- 2019年 ASTM A336/A336M-19 压力和高温部件用合金钢锻件的标准规范
- 2018年 ASTM A336/A336M-18a 压力和高温部件用合金钢锻件的标准规范
- 2018年 ASTM A336/A336M-18 压力和高温零件用合金钢锻件标准规范
- 2015年 ASTM A336/A336M-15 压力和高温部件用合金钢锻件的标准规格
- 2010年 ASTM A336/A336M-10a 高压和高温部件用合金钢铸件标准规格
- 2010年 ASTM A336/A336M-10 高压和高温部件用合金钢铸件标准规范
- 2009年 ASTM A336/A336M-09 压力与高温部件用合金钢锻件规格
- 2008年 ASTM A336/A336M-08 高压和高温部件用合金钢铸件标准规格
- 2007年 ASTM A336/A336M-07 高压和高温部件用合金钢铸件标准规格
- 2006年 ASTM A336/A336M-06a 高压和高温部件用合金钢铸件标准规格
- 2006年 ASTM A336/A336M-06 高压和高温部件用合金钢铸件标准规格
- 2005年 ASTM A336/A336M-05 高压和高温部件用合金钢铸件标准规格
- 2003年 ASTM A336/A336M-03a 高压和高温部件用合金钢铸件标准规格
- 2003年 ASTM A336/A336M-03 高压和高温部件用合金钢铸件标准规格
- 1999年 ASTM A336/A336M-99e1 高压和高温部件用合金钢铸件标准规格
1.1 This specification2 covers ferritic steel forgings for boilers, pressure vessels, high-temperature parts, and associated equipment. 1.2 Forgings made of steel grades listed in Specification A335/A335M may also be ordered under this specification. The chemical, tensile, heat treatment, and marking requirements of Specification A335/A335M shall apply, except the forging shall conform to the chemical requirements of Tables 1 and 2 of Specification A335/A335M only with respect to heat analysis. On product analysis they may deviate from these limits to the extent permitted in Table 1 of this specification. 1.3 Supplementary Requirements S1 to S10 are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order. 1.4 Unless the order specifies the applicable “M” specification designation, the material shall be furnished to the inchpound units. 1.5 Specification A336/A336M formerly included austenitic steel forgings, which are now found in Specification A965/ A965M. 1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- 标准号
- ASTM A336/A336M-23
- 发布
- 2023年
- 发布单位
- 美国材料与试验协会
- 当前最新
- ASTM A336/A336M-23
- 引用标准
- ASTM A275/A275M ASTM A335/A335M ASTM A370 ASTM A788/A788M ASTM A965/A965M ASTM E165/E165M ASTM F6 ASTM F9 ASTM F91 ASTM F911